From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Memory size detection on P1011
Date: Thu, 05 May 2011 21:43:58 +0200 [thread overview]
Message-ID: <20110505194359.04271D60EB7@gemini.denx.de> (raw)
In-Reply-To: <4DC2F72F.2050009@embedded-sol.com>
Dear Felix Radensky,
In message <4DC2F72F.2050009@embedded-sol.com> you wrote:
>
> The closest example of using get_ram_size() I've found is
> for MPC8548 TQM boards. But all these boards have 4-bank
> memory devices, so I'm sure my case was tested. Don't you
> think there can be a problem with reprogramming bank number
> in this particular DDR controller ?
I haven't done this myself yet on this hardware, but I would be very
surprised if you could not reprogram the controller.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
You might not be as stupid as you look. This is not hard. Let's think
about this. I mean ... I'll think about this, and you can join in
when you know the words. - Terry Pratchett, _Men at Arms_
next prev parent reply other threads:[~2011-05-05 19:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-05 13:17 [U-Boot] Memory size detection on P1011 Felix Radensky
2011-05-05 13:29 ` York Sun
2011-05-05 14:05 ` Felix Radensky
2011-05-05 18:24 ` Wolfgang Denk
2011-05-05 19:14 ` Felix Radensky
2011-05-05 19:43 ` Wolfgang Denk [this message]
2011-05-06 6:11 ` Felix Radensky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110505194359.04271D60EB7@gemini.denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox