From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Frysinger Date: Sat, 14 May 2011 07:34:13 -0400 Subject: [U-Boot] [PATCH 0/4] Accurate boot time measurement In-Reply-To: <1305319923-9477-1-git-send-email-sjg@chromium.org> References: <1305319923-9477-1-git-send-email-sjg@chromium.org> Message-ID: <201105140734.13610.vapier@gentoo.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Friday, May 13, 2011 16:51:59 Simon Glass wrote: > This defines the basics of a new boot time measurement feature. This allows > logging of very accurate time measurements as the boot proceeds, by using > an available microsecond counter. > > To enable the feature, define CONFIG_BOOTSTAGE in your board config file. > Also available is CONFIG_BOOTSTAGE_REPORT which will cause a report to be > printed just before handing off to the OS. this seems to overlap the existing show_boot_progress() code. any chance we can look at these being merged ? -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. Url : http://lists.denx.de/pipermail/u-boot/attachments/20110514/803dcf2d/attachment.pgp