From: Marek Vasut <marek.vasut@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [IXP42x PATCH series v4 06/17] support CONFIG_SYS_LDSCRIPT on ARM
Date: Sun, 22 May 2011 17:33:18 +0200 [thread overview]
Message-ID: <201105221733.18909.marek.vasut@gmail.com> (raw)
In-Reply-To: <1302126558-1318-7-git-send-email-michael@schwingen.org>
On Wednesday, April 06, 2011 11:49:07 PM Michael Schwingen wrote:
> Signed-off-by: Michael Schwingen <michael@schwingen.org>
> ---
> Changes for V3:
> - new in V3, replaces config.mk files in earlier patches
> Changes for V4:
> - add changelog
>
> arch/arm/config.mk | 6 ++++++
> 1 files changed, 6 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/config.mk b/arch/arm/config.mk
> index a6a4742..a7c4d27 100644
> --- a/arch/arm/config.mk
> +++ b/arch/arm/config.mk
> @@ -63,7 +63,13 @@ ifeq (,$(findstring
> arch/arm/lib/eabi_compat.o,$(PLATFORM_LIBS))) PLATFORM_LIBS +=
> $(OBJTREE)/arch/arm/lib/eabi_compat.o
> endif
> endif
> +
> +ifdef CONFIG_SYS_LDSCRIPT
> +# need to strip off double quotes
> +LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
> +else
> LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds
> +endif
>
> # needed for relocation
> ifndef CONFIG_NAND_SPL
Hi, this one doesn't apply for me ...
next prev parent reply other threads:[~2011-05-22 15:33 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-06 21:49 [U-Boot] [IXP42x PATCH series v4 00/17] Overview Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 01/17] add XScale sub architecture (IXP/PXA) to maintainer list Michael Schwingen
2011-05-20 23:53 ` Marek Vasut
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 02/17] add support for IXP42x Rev. B1 and newer Michael Schwingen
2011-05-20 23:53 ` Marek Vasut
2011-05-21 18:31 ` Wolfgang Denk
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 03/17] trigger hardware watchdog in IXP42x serial driver Michael Schwingen
2011-05-20 23:54 ` Marek Vasut
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 04/17] Fix IXP code to work after relocation was added Michael Schwingen
2011-05-20 23:58 ` Marek Vasut
2011-05-22 19:15 ` Michael Schwingen
2011-05-23 0:38 ` Marek Vasut
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 05/17] fix "depend" target in npe directory Michael Schwingen
2011-05-20 23:59 ` Marek Vasut
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 06/17] support CONFIG_SYS_LDSCRIPT on ARM Michael Schwingen
2011-05-22 15:33 ` Marek Vasut [this message]
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 07/17] use -ffunction-sections / --gc-sections on IXP42x Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 08/17] update/fix AcTux1 board Michael Schwingen
2011-05-21 0:03 ` Marek Vasut
2011-05-22 15:36 ` Marek Vasut
2011-05-22 21:53 ` Michael Schwingen
2011-05-22 19:51 ` Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 09/17] update/fix AcTux2 board Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 10/17] update/fix AcTux3 board Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 11/17] update/fix AcTux4 board Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 12/17] IXP NPE: add support for fixed-speed MII ports Michael Schwingen
2011-05-21 0:05 ` Marek Vasut
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 13/17] add dvlhost (dLAN 200 AV Wireless G) board Michael Schwingen
2011-05-21 0:06 ` Marek Vasut
2011-05-22 20:53 ` Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 14/17] update/fix IXDP425 / IXDPG425 boards Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 15/17] update/fix PDNB3 board Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 16/17] IXP42x PCI rewrite Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 17/17] run arm_pci_init after relocation Michael Schwingen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201105221733.18909.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox