From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Mon, 23 May 2011 09:19:18 +0200
Subject: [U-Boot] AT91: CFI support broken
In-Reply-To: <4DD66621.2050909@bus-elektronik.de>
References: <4DD647B7.2050706@bus-elektronik.de>
	<4DD65663.1070802@emk-elektronik.de>
	<4DD66621.2050909@bus-elektronik.de>
Message-ID: <201105230919.19134.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Jens,

On Friday 20 May 2011 15:01:21 Jens Scharsig wrote:
> >> u-boot/drivers/mtd/cfi_flash.c:576: undefined reference to `reset_timer'
> >> 
> >> I think this patch should be revert, as long as other modules need the
> >> reset_timer function.
> >> 
> >> Can anybody confirm this
> > 
> > I think we should fix the place where reset_timer() is still used, to use
> > get_timer() only. All other drivers that are used in atmel context do
> > not use reset_timer(), but rely on the fact that get_timer() is
> > monotonic. reset_timer() resets the value back to zero.
> > 
> > Best Regards,
> > Reinhard
> 
> what do you think about?

I would welcome it, if somebody would provide a patch to remove the 
reset_timer() call from the common CFI driver.

Best regards,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de