From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Jander Date: Fri, 27 May 2011 14:46:42 +0200 Subject: [U-Boot] Linux 2.6.33.9 (RT) on mpc5121 In-Reply-To: <76E1146DEE728E4E95C1C6D1EEA1DBA952A7804F@GRBSR0004.marel.net> References: <76E1146DEE728E4E95C1C6D1EEA1DBA952A7804F@GRBSR0004.marel.net> Message-ID: <20110527144642.556662cd@archvile> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, 27 May 2011 11:34:53 +0000 Einar M?r Bj?rgvinsson wrote: > hi > > I'm not sure if this is the proper list for posting this question but it > seems to me that there are some folks here that have vast experience of the > mpc5121 chip, so here it goes. It is indeed not the correct list. You might want to try linuxppc-dev at lists.ozlabs.org for better results. > I'm currently trying to port an older kernel version (2.6.33-rc6 non > realtime) to a newer one (2.6.33.9 with RT-PREEMPT 2.6.33.9). The initial > support for USB and CAN was done by Denx. Have you checked latest mainline linux for that processor? I don't know what drivers you need, but there has been a lot of progress, and chances are it works better than what you have now :-) Best regards, -- David Jander Protonic Holland.