From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Frysinger Date: Wed, 8 Jun 2011 12:56:21 -0400 Subject: [U-Boot] Supporting SCCB protocol In-Reply-To: References: Message-ID: <201106081256.22190.vapier@gentoo.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wednesday, June 08, 2011 03:54:01 Detlev Zundel wrote: > > That's correct! I should elaborate it. It should be (Serial Camera > > Control Bus) protocol developed by omnivision. > > I am using a OV2715 sensor and I need to access the registers of the said > > sensor, I have to modify the I2C read/write in uboot to support the SCCB > > transactions. > > So SCCB is really only another name for I2C or are there differences in > the protocol? there are slight differences. enough that existing i2c signals arent sufficient, but not enough that tweaking existing i2c framework shouldnt be too much of a hassle to make work. -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. Url : http://lists.denx.de/pipermail/u-boot/attachments/20110608/abee9f97/attachment.pgp