[U-Boot] [PATCH 2/5] Added extra documentation about how the relocation address to RAM is picked for ARM.

[Christopher Harvey <charvey@matrox.com>]

Signed-off-by: Christopher Harvey <charvey@matrox.com>
---
 doc/README.arm-relocation |    9 ++++++++-
 1 files changed, 8 insertions(+), 1 deletions(-)

diff --git a/doc/README.arm-relocation b/doc/README.arm-relocation
index 5a9a2fb..954627d 100644
--- a/doc/README.arm-relocation
+++ b/doc/README.arm-relocation
@@ -22,7 +22,7 @@ At cpu level: modify linker file and add a relocation and fixup loop
 At board level:
 
 	dram_init(): bd pointer is now at this point not accessible, so only
-	detect the real dramsize, and store it in gd->ram_size. Bst detected
+	detect the real dramsize, and store it in gd->ram_size. Best detected
 	with get_ram_size().
 
 TODO:	move also dram initialization there on boards where it is possible.
@@ -38,6 +38,13 @@ At lib level:
 
 Boards which are not fixed to support relocation will be REMOVED!
 
+The code that picks the location in RAM for ARM can be found in the 
+arch/arm/lib/board.c file under the board_init_f function. 
+The postfix _f means executed from flash, and _r means from RAM. 
+The new location is picked with respect to the highest RAM address, and the
+exact final value depends heavily on compile time options. The source is the
+best documentation here. 
+
 -----------------------------------------------------------------------------
 
 For boards which boot from nand_spl, it is possible to save one copy
-- 
1.7.3.4