From: Anatolij Gustschin <agust@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3] OMAP3: Add DSS driver for OMAP3
Date: Mon, 4 Jul 2011 23:58:58 +0200 [thread overview]
Message-ID: <20110704235858.51e11bf8@wker> (raw)
In-Reply-To: <1303343572-19972-25-git-send-email-jkridner@beagleboard.org>
On Wed, 20 Apr 2011 18:52:48 -0500
Jason Kridner <jkridner@beagleboard.org> wrote:
> From: Syed Mohammed Khasim <khasim@ti.com>
>
> Supports dynamic panel configuration
> Supports dynamic tv standard selection
> Adds support for DSS register access through generic APIs
>
> Incorporated DSS register access using structures.
>
> Previous discussions are here
> http://www.mail-archive.com/u-boot at lists.denx.de/msg27150.html
> ---
> v2 updates:
> * Enable panel output for BeagleBoard
> * BeagleBoard: Update DVI-D orange screen frequencies for xM
>
> v3 updates:
> * Remove non-platform (OMAP3) updates
>
> Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
> ---
> arch/arm/include/asm/arch-omap3/dss.h | 173 +++++++++++++++++++++++++++++++++
> drivers/video/omap3_dss.c | 130 +++++++++++++++++++++++++
> 2 files changed, 303 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-omap3/dss.h
> create mode 100644 drivers/video/omap3_dss.c
applied to u-boot-video/master after fixing the commit
description to include SoB lines. Thanks!
Anatolij
next prev parent reply other threads:[~2011-07-04 21:58 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-20 23:52 [U-Boot] [PATCH] BeagleBoard updates rebased on u-boot-ti and debugged Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: add xM rev C to ID table Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: fixed typo in typecast Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] Corrected LED name match finding Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: fix LED 0/1 in driver Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] led: added cmd_led to Makefile Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] led: correct off/on locations in structure Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] led: remove trailing whitespace Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] led: loop through all leds Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] led: fixup help/usage Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: Pin mux initialization glitch fix Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: Switch default console from ttyS2 to ttyO2 Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: Remove omapfb.debug=y from Beagle and Overo env settings Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: reduce BOOTDELAY to 3 Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: change default resolution to VGA Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: don't suck in blank line Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: make mtest run Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: increase command-line functionality Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: load kernel via MMC ext2 Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: add optargs/buddy/camera Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: add ramboot Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH v2] BeagleBoard: Added userbutton command Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: use the USERBUTTON command Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] video: DSS makefile update Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH v3] OMAP3: Add DSS driver for OMAP3 Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: config: enable DSS Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: Configure DVI/S-video Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH v3] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] TWL4030/BeagleBoard: Added hub power enable Jason Kridner
2011-04-21 6:29 ` [U-Boot] [PATCH v3] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor Igor Grinberg
2011-04-21 6:26 ` [U-Boot] [PATCH] BeagleBoard: Configure DVI/S-video Igor Grinberg
2011-07-04 21:58 ` Anatolij Gustschin [this message]
2011-08-04 20:54 ` [U-Boot] [PATCH v3] OMAP3: Add DSS driver for OMAP3 Wolfgang Denk
2011-08-04 21:14 ` Jason Kridner
2011-08-04 21:02 ` Wolfgang Denk
2011-07-04 21:51 ` [U-Boot] [PATCH] video: update Makefile to include OMAP3 DSS driver Anatolij Gustschin
2011-07-04 22:40 ` Anatolij Gustschin
2011-04-21 5:58 ` [U-Boot] [PATCH] led: correct off/on locations in structure Igor Grinberg
2011-04-30 5:46 ` [U-Boot] [beagleboard] [PATCH] BeagleBoard: fixed typo in typecast Dirk Behme
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110704235858.51e11bf8@wker \
--to=agust@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox