[U-Boot] [PATCH 1/5] EfikaMX: Use correct imximage.cfg

[U-Boot] [PATCH 1/5] EfikaMX: Use correct imximage.cfg

[Marek Vasut]

From: Jana Rapava <fermata7@gmail.com>

Signed-off-by: Jana Rapava <fermata7@gmail.com>
---
 boards.cfg |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/boards.cfg b/boards.cfg
index e682f76..52f37f0 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -139,7 +139,7 @@ omap5912osk                  arm         arm926ejs   -                   ti
 edminiv2                     arm         arm926ejs   -                   LaCie          orion5x
 dkb			     arm         arm926ejs   -                   Marvell        pantheon
 ca9x4_ct_vxp                 arm         armv7       vexpress            armltd
-efikamx                      arm         armv7       efikamx             -              mx5		mx51evk:IMX_CONFIG=board/efikamx/imximage.cfg
+efikamx                      arm         armv7       efikamx             -              mx5		efikamx:IMX_CONFIG=board/efikamx/imximage.cfg
 mx51evk                      arm         armv7       mx51evk             freescale      mx5		mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
 mx53ard                      arm         armv7       mx53ard             freescale      mx5		mx53ard:IMX_CONFIG=board/freescale/mx53ard/imximage_dd3.cfg
 mx53evk                      arm         armv7       mx53evk             freescale      mx5		mx53evk:IMX_CONFIG=board/freescale/mx53evk/imximage.cfg
-- 
1.7.5.3

[U-Boot] [PATCH 2/5] EfikaMX: Add missing CONFIG_SYS_TEXT_BASE

[Marek Vasut]

From: Jana Rapava <fermata7@gmail.com>

Signed-off-by: Jana Rapava <fermata7@gmail.com>
---
 include/configs/efikamx.h |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h
index a04ac49..209d3e2 100644
--- a/include/configs/efikamx.h
+++ b/include/configs/efikamx.h
@@ -38,6 +38,8 @@
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
+#define CONFIG_SYS_TEXT_BASE		0x97800000
+
 #define CONFIG_SYS_L2CACHE_OFF
 
 /*
-- 
1.7.5.3

[U-Boot] [PATCH 2/5] EfikaMX: Add missing CONFIG_SYS_TEXT_BASE

[Stefano Babic]

On 07/12/2011 02:16 AM, Marek Vasut wrote:
> From: Jana Rapava <fermata7@gmail.com>
> 
> Signed-off-by: Jana Rapava <fermata7@gmail.com>
> ---
>  include/configs/efikamx.h |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)
> 

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

[U-Boot] [PATCH 3/5] EfikaMX: Enable EXT2 booting

[Marek Vasut]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 include/configs/efikamx.h |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h
index 209d3e2..7d3363a 100644
--- a/include/configs/efikamx.h
+++ b/include/configs/efikamx.h
@@ -49,6 +49,7 @@
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_MMC
 #define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
 #define CONFIG_CMD_IDE
 #undef CONFIG_CMD_IMLS
 
-- 
1.7.5.3

[U-Boot] [PATCH 3/5] EfikaMX: Enable EXT2 booting

[Stefano Babic]

On 07/12/2011 02:16 AM, Marek Vasut wrote:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> ---
>  include/configs/efikamx.h |    1 +
>  1 files changed, 1 insertions(+), 0 deletions(-)
> 

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

[U-Boot] [PATCH 4/5] USB: Move USB_PRINTF() out of ifdef in usb_scan_devices()

[Marek Vasut]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 common/usb.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/common/usb.c b/common/usb.c
index 4f7c520..8e84266 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -957,8 +957,8 @@ void usb_scan_devices(void)
 	/* insert "driver" if possible */
 #ifdef CONFIG_USB_KEYBOARD
 	drv_usb_kbd_init();
-	USB_PRINTF("scan end\n");
 #endif
+	USB_PRINTF("scan end\n");
 }
 
 
-- 
1.7.5.3

[U-Boot] [PATCH 4/5] USB: Move USB_PRINTF() out of ifdef in usb_scan_devices()

[Stefano Babic]

On 07/12/2011 02:16 AM, Marek Vasut wrote:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> ---
>  common/usb.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/common/usb.c b/common/usb.c
> index 4f7c520..8e84266 100644

Hi Marek,

this should be checked by the USB maintainer, also if it is part of the
Efikamx patchset - I set him in CC.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

[U-Boot] [PATCH 4/5] USB: Move USB_PRINTF() out of ifdef in usb_scan_devices ()

[Marek Vasut]

On Wednesday, July 13, 2011 03:49:00 PM Stefano Babic wrote:
> On 07/12/2011 02:16 AM, Marek Vasut wrote:
> > Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> > ---
> > 
> >  common/usb.c |    2 +-
> >  1 files changed, 1 insertions(+), 1 deletions(-)
> > 
> > diff --git a/common/usb.c b/common/usb.c
> > index 4f7c520..8e84266 100644
> 
> Hi Marek,
> 
> this should be checked by the USB maintainer, also if it is part of the
> Efikamx patchset - I set him in CC.

Yea of course ... I sent this to Remy some time ago already, got no response so 
far ...
> 
> Best regards,
> Stefano Babic

[U-Boot] [PATCH 4/5] USB: Move USB_PRINTF() out of ifdef in usb_scan_devices()

[Remy Bohmer]

Hi,

2011/7/13 Marek Vasut <marek.vasut@gmail.com>:
> On Wednesday, July 13, 2011 03:49:00 PM Stefano Babic wrote:
>> On 07/12/2011 02:16 AM, Marek Vasut wrote:
>> > Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
>> > ---
>> >
>> > ?common/usb.c | ? ?2 +-
>> > ?1 files changed, 1 insertions(+), 1 deletions(-)
>> >
>> > diff --git a/common/usb.c b/common/usb.c
>> > index 4f7c520..8e84266 100644
>>
>> Hi Marek,
>>
>> this should be checked by the USB maintainer, also if it is part of the
>> Efikamx patchset - I set him in CC.
>
> Yea of course ... I sent this to Remy some time ago already, got no response so
> far ...

Hey.. It is a holiday season... ;-)

Acked-by: Remy Bohmer <linux@bohmer.net>
(It can go with the rest of the series)

Kind regards,

Remy

[U-Boot] [PATCH 4/5] USB: Move USB_PRINTF() out of ifdef in usb_scan_devices()

[Remy Bohmer]

Hi,

>> Yea of course ... I sent this to Remy some time ago already, got no response so
>> far ...
>
> Hey.. It is a holiday season... ;-)
>
> Acked-by: Remy Bohmer <linux@bohmer.net>
> (It can go with the rest of the series)

Seems that it time to go again on a next vacation...
I just pulled in 5/5 of this series, so I can pull this one in myself
as well ;-)

Applied to u-boot-usb. Thanks.

Remy

[U-Boot] [PATCH 5/5] USB: Set portnr so USB1.1 and 1.0 devices work on EHCI controllers

[Marek Vasut]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 common/usb.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/common/usb.c b/common/usb.c
index 8e84266..a401c09 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -1166,6 +1166,7 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port)
 
 	dev->children[port] = usb;
 	usb->parent = dev;
+	usb->portnr = port + 1;
 	/* Run it through the hoops (find a driver, etc) */
 	if (usb_new_device(usb)) {
 		/* Woops, disable the port */
-- 
1.7.5.3

[U-Boot] [PATCH 5/5] USB: Set portnr so USB1.1 and 1.0 devices work on EHCI controllers

[Sergei Shtylyov]

Hello.

Marek Vasut wrote:

> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

    Hm... but EHCI controllers only support high speed (USB 2.0) devices...
You need a companion controller (UHCI/OHCI) to support the full/low speed devices.

WBR, Sergei

[U-Boot] [PATCH 5/5] USB: Set portnr so USB1.1 and 1.0 devices work on EHCI controllers

[Marek Vasut]

On Tuesday, July 12, 2011 04:56:23 PM Sergei Shtylyov wrote:
> Hello.
> 
> Marek Vasut wrote:
> > Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> 
>     Hm... but EHCI controllers only support high speed (USB 2.0) devices...
> You need a companion controller (UHCI/OHCI) to support the full/low speed
> devices.

Hi,

I have the thing past a hub with TT. So it's not a problem.
> 
> WBR, Sergei

[U-Boot] [PATCH 5/5] USB: Set portnr so USB1.1 and 1.0 devices work on EHCI controllers

[Remy Bohmer]

Hi,

2011/7/12 Marek Vasut <marek.vasut@gmail.com>:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> ---
> ?common/usb.c | ? ?1 +
> ?1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/common/usb.c b/common/usb.c
> index 8e84266..a401c09 100644
> --- a/common/usb.c
> +++ b/common/usb.c
> @@ -1166,6 +1166,7 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port)
>
> ? ? ? ?dev->children[port] = usb;
> ? ? ? ?usb->parent = dev;
> + ? ? ? usb->portnr = port + 1;
> ? ? ? ?/* Run it through the hoops (find a driver, etc) */
> ? ? ? ?if (usb_new_device(usb)) {
> ? ? ? ? ? ? ? ?/* Woops, disable the port */
>

Applied to u-boot-usb. Thanks.

Kind regards,

Remy

[U-Boot] [PATCH 1/5] EfikaMX: Use correct imximage.cfg

[Stefano Babic]

On 07/12/2011 02:16 AM, Marek Vasut wrote:
> From: Jana Rapava <fermata7@gmail.com>
> 
> Signed-off-by: Jana Rapava <fermata7@gmail.com>
> ---
>  boards.cfg |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================