From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Wed, 13 Jul 2011 08:08:28 +0200 Subject: [U-Boot] running as stand alone In-Reply-To: <07ACDFB8ECA8EF47863A613BC01BBB22032437A4@HYD-MKD-MBX02.wipro.com> References: <07ACDFB8ECA8EF47863A613BC01BBB22032437A4@HYD-MKD-MBX02.wipro.com> Message-ID: <20110713060828.A6E1D16F12CE@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear smitha.vanga at wipro.com, In message <07ACDFB8ECA8EF47863A613BC01BBB22032437A4@HYD-MKD-MBX02.wipro.com> you wrote: > > My u-boot works when run from the BDI emulator. But when it is > programmed in flash and powered on with out connecting the emulator > > It does not come up . I checked the HRCW its correct. Any suggestions? Check which initializations are done in the BDI init sequence, and check which of them are needed and missing in U-Boot. > The information contained in this electronic message and any attachments to > this message are intended for the exclusive use of the addressee(s) and may > contain proprietary, confidential or privileged information. If you are not > the intended recipient, you should not disseminate, distribute or copy this > e-mail. Please notify the sender immediately and destroy all copies of this > message and any attachments. Please omit such crap when posting to public mailing lists. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de You can love it, change it, or leave it. There is NO other option. But do not complain - it is your own choice... -- wd