From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Fri, 15 Jul 2011 13:22:56 +0200 Subject: [U-Boot] Ping command In-Reply-To: <07ACDFB8ECA8EF47863A613BC01BBB22032BC8BF@HYD-MKD-MBX02.wipro.com> References: <07ACDFB8ECA8EF47863A613BC01BBB22032BC8BF@HYD-MKD-MBX02.wipro.com> Message-ID: <20110715112257.05CBB16F76F1@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear smitha.vanga at wipro.com, please stop top posting/ full quoting. You can find hints here: http://www.netmeister.org/news/learn2quote.html In message <07ACDFB8ECA8EF47863A613BC01BBB22032BC8BF@HYD-MKD-MBX02.wipro.com> you wrote: > > I get the below messages. Its failing in the fec_send BD_ENET_TX_READY > bit is not getting set. > Any clue? Check your clock routing. Eventually you have misconfigured the Tx clock. > > >ping 172.16.52.20 > > Using unknown device > > ping failed; host 172.16.52.20 is not alive > > Check the source code and find out why ping reports an "unknown device". Did you solve this "unknown device" issue? THis must be done first. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Very ugly or very beautiful women should be flattered on their understanding, and mediocre ones on their beauty. -- Philip Earl of Chesterfield