From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Mon, 25 Jul 2011 13:55:02 +0200 Subject: [U-Boot] [PATCH] ppc460: read get_sys_info from CPR registers instead of STRP registers In-Reply-To: <1311260763-15422-1-git-send-email-mike@mikebwilliams.com> References: <1311260763-15422-1-git-send-email-mike@mikebwilliams.com> Message-ID: <201107251355.02565.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Mike, On Thursday 21 July 2011 17:06:03 Mike Williams wrote: > This code has been changed to read the CPU speed information from the > CPR registers rather than the bootstrap registers. This is useful when > changing the clock speed to something other than the default on boot. Thanks. Unfortunately this patch introduces compile errors for 460SX boards (e.g. redwood): [stefan at kubuntu u-boot-ppc4xx (master)]$ ./MAKEALL redwood Configuring for redwood board... speed.c: In function 'get_sys_info': speed.c:339: error: 'PLLD_FWDVA_MASK' undeclared (first use in this function) speed.c:339: error: (Each undeclared identifier is reported only once speed.c:339: error: for each function it appears in.) speed.c:340: error: 'PLLD_FWDVB_MASK' undeclared (first use in this function) speed.c:341: error: 'PLLD_FBDV_MASK' undeclared (first use in this function) speed.c:344: error: 'OPBDV_MASK' undeclared (first use in this function) speed.c:348: error: 'PERDV_MASK' undeclared (first use in this function) speed.c:351: error: 'CPR0_PLBED' undeclared (first use in this function) speed.c:352: error: 'PLBEDDV_MASK' undeclared (first use in this function) speed.c:357: error: 'PLLC_FBSEL_MASK' undeclared (first use in this function) make[1]: *** [speed.o] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [arch/powerpc/cpu/ppc4xx/libppc4xx.o] Error 2 make: *** Waiting for unfinished jobs.... Could you please check, if the 460SX has the same registers and bits as 460EX/GT and extend its header as well? Thanks. Best regards, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de