[U-Boot] [PATCH] ppc460: read get_sys_info from CPR registers instead of STRP registers

[Stefan Roese <sr@denx.de>]

Mike,

[Added Marri from APM to CC]

On Monday 25 July 2011 16:42:14 Mike Williams wrote:
> > (first use in this function) make[1]: *** [speed.o] Error 1
> > make[1]: *** Waiting for unfinished jobs....
> > make: *** [arch/powerpc/cpu/ppc4xx/libppc4xx.o] Error 2
> > make: *** Waiting for unfinished jobs....
> > 
> > Could you please check, if the 460SX has the same registers and bits as
> > 460EX/GT and extend its header as well?
> 
> I forgot about the SX. Unfortunately, it looks like the SX has a
> significantly different clocking system than the EX/GT. For instance,
> it has two PLLs, different available dividers, etc. Additionally, I
> don't have an SX board to test with. Perhaps I should save the old
> code path for that board?
> 
> Let me know what you think.

I also don't have access to an 460SX board. And yes, perhaps its best to split 
the code now (460EX/GT vs. 460SX).

Marri, what do you think? Perhaps you could test the resulting code on an SX 
board?

Thanks,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de