From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Mon, 25 Jul 2011 17:11:21 +0200 Subject: [U-Boot] [PATCH] ppc460: read get_sys_info from CPR registers instead of STRP registers In-Reply-To: References: <1311260763-15422-1-git-send-email-mike@mikebwilliams.com> <201107251355.02565.sr@denx.de> Message-ID: <201107251711.21381.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Mike, [Added Marri from APM to CC] On Monday 25 July 2011 16:42:14 Mike Williams wrote: > > (first use in this function) make[1]: *** [speed.o] Error 1 > > make[1]: *** Waiting for unfinished jobs.... > > make: *** [arch/powerpc/cpu/ppc4xx/libppc4xx.o] Error 2 > > make: *** Waiting for unfinished jobs.... > > > > Could you please check, if the 460SX has the same registers and bits as > > 460EX/GT and extend its header as well? > > I forgot about the SX. Unfortunately, it looks like the SX has a > significantly different clocking system than the EX/GT. For instance, > it has two PLLs, different available dividers, etc. Additionally, I > don't have an SX board to test with. Perhaps I should save the old > code path for that board? > > Let me know what you think. I also don't have access to an 460SX board. And yes, perhaps its best to split the code now (460EX/GT vs. 460SX). Marri, what do you think? Perhaps you could test the resulting code on an SX board? Thanks, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de