From: Eric Jarrige <eric.jarrige@armadeus.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/9] Series short description
Date: Wed, 10 Aug 2011 22:33:00 +0200 [thread overview]
Message-ID: <20110810200828.21204.60050.stgit@shuttle2.etheralp.ch> (raw)
The following series adds support for the Armadeus Project
board apf9328 and also fixes some driver issues or improvements
concerning the Freescale iMX1 cpu, DM9000 ethernet controler and
the final call to the relocated board_init_r for the arm920t.
The last arm920t patch should be applicable to the whole arm cpu family
if some other CPU have the same behavior of mirroring the flash
memory to a different address at power on reset.
---
Eric Jarrige (9):
mx1: export imx_gpio_mode() function
mx1: add i2c registers
apf9328: Add Armadeus Project board APF9328
apf9328: add apf9328 board in Makefile
apf9328: add default board configuration file
mx1: improve PLL freq computation
mx1: change a printf in speed.c to use debug instead
DM9000: change some printf to use debug instead
arm920t: Fix jump to the relocated board_init_r
MAINTAINERS | 4
MAKEALL | 1
arch/arm/cpu/arm920t/imx/speed.c | 31 -
arch/arm/cpu/arm920t/start.S | 4
arch/arm/include/asm/arch-imx/imx-regs.h | 30 +
board/armadeus/apf9328/Makefile | 51 +
board/armadeus/apf9328/apf9328.c | 91 +++
board/armadeus/apf9328/apf9328fpga.c | 89 +++
board/armadeus/apf9328/apf9328fpga.h | 31 +
board/armadeus/apf9328/eeprom.c | 88 +++
board/armadeus/apf9328/fpga.c | 121 ++++
board/armadeus/apf9328/fpga.h | 30 +
board/armadeus/apf9328/i2c.c | 276 ++++++++
board/armadeus/apf9328/lowlevel_init.S | 469 ++++++++++++++
boards.cfg | 1
drivers/net/dm9000x.c | 8
include/configs/apf9328.h | 1034 ++++++++++++++++++++++++++++++
17 files changed, 2333 insertions(+), 26 deletions(-)
create mode 100644 board/armadeus/apf9328/Makefile
create mode 100644 board/armadeus/apf9328/apf9328.c
create mode 100644 board/armadeus/apf9328/apf9328fpga.c
create mode 100644 board/armadeus/apf9328/apf9328fpga.h
create mode 100644 board/armadeus/apf9328/eeprom.c
create mode 100644 board/armadeus/apf9328/fpga.c
create mode 100644 board/armadeus/apf9328/fpga.h
create mode 100644 board/armadeus/apf9328/i2c.c
create mode 100644 board/armadeus/apf9328/lowlevel_init.S
create mode 100644 include/configs/apf9328.h
--
Best regards,
Eric Jarrige
next reply other threads:[~2011-08-10 20:33 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-10 20:33 Eric Jarrige [this message]
2011-08-10 20:33 ` [U-Boot] [PATCH 1/9] mx1: export imx_gpio_mode() function Eric Jarrige
2011-08-10 20:33 ` [U-Boot] [PATCH 2/9] mx1: add i2c registers Eric Jarrige
2011-08-11 8:52 ` Stefano Babic
2011-08-11 23:49 ` Eric Jarrige
2011-10-06 22:04 ` Wolfgang Denk
2011-08-10 20:33 ` [U-Boot] [PATCH 3/9] apf9328: Add Armadeus Project board APF9328 Eric Jarrige
2011-08-11 8:50 ` Stefano Babic
2011-08-11 23:41 ` Eric Jarrige
2011-08-12 6:49 ` Stefano Babic
2011-08-17 7:31 ` Igor Grinberg
2011-08-17 21:58 ` Eric Jarrige
2011-08-18 6:20 ` Igor Grinberg
2011-08-18 8:51 ` Stefano Babic
2011-08-10 20:33 ` [U-Boot] [PATCH 4/9] apf9328: add apf9328 board in Makefile Eric Jarrige
2011-08-10 20:33 ` [U-Boot] [PATCH 5/9] apf9328: add default board configuration file Eric Jarrige
2011-08-11 9:21 ` Stefano Babic
2011-08-15 20:25 ` Eric Jarrige
2011-08-23 9:46 ` Stefano Babic
2011-08-24 4:50 ` Eric Jarrige
2011-08-23 11:26 ` Wolfgang Denk
2011-08-24 4:56 ` Eric Jarrige
2011-08-24 5:49 ` Wolfgang Denk
2011-08-24 6:34 ` Wolfgang Denk
2011-08-24 23:01 ` Eric Jarrige
2011-08-24 22:26 ` Eric Jarrige
2011-08-24 22:56 ` Wolfgang Denk
2011-08-24 6:22 ` Stefano Babic
2011-08-24 23:08 ` Eric Jarrige
2011-10-06 22:03 ` Wolfgang Denk
2011-08-10 20:33 ` [U-Boot] [PATCH 6/9] mx1: improve PLL freq computation Eric Jarrige
2011-08-11 9:22 ` Stefano Babic
2011-08-12 0:03 ` Eric Jarrige
2011-08-12 0:28 ` Eric Jarrige
2011-08-12 6:51 ` Stefano Babic
2011-08-10 20:33 ` [U-Boot] [PATCH 7/9] mx1: change a printf in speed.c to use debug instead Eric Jarrige
2011-08-10 20:33 ` [U-Boot] [PATCH 8/9] DM9000: change some printf " Eric Jarrige
2011-08-11 7:26 ` Simon Schwarz
2011-08-11 8:01 ` Detlev Zundel
2011-08-11 10:51 ` Eric Jarrige
2011-08-24 20:20 ` Wolfgang Denk
2011-08-24 23:04 ` Eric Jarrige
2011-08-25 3:19 ` Marek Vasut
2011-08-25 5:49 ` Wolfgang Denk
2011-08-11 9:27 ` Stefano Babic
2011-08-10 20:33 ` [U-Boot] [PATCH 9/9] arm920t: Fix jump to the relocated board_init_r Eric Jarrige
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110810200828.21204.60050.stgit@shuttle2.etheralp.ch \
--to=eric.jarrige@armadeus.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox