[U-Boot] DreamPlug - progress?

Jason
2011-08-21T00:38:35Z

On Sat, Aug 20, 2011 at 12:11:38PM +1000, Adam Baxter wrote:
> Hi all,
> I have a Globalscale Dreamplug
> I wish to accomplish the following:
> * Backup original uboot
> * Verify original uboot
> * Flash patched uboot to SPI
>
> Any roadblocks? I couldn't confirm, either via this list or looking at
> commits whether Dreamplug support ever made it back into mainline
> uboot...

dreamplug patches have not been accepted into mainline because the
proper way to do it (which globalscale didn't do in the binary they
provided) is with a new machine id. This is already reserved [1].
U-boot shouldn't use the new mach-id until it is in mainline Linux.
Linux won't accept new ARM boards unless they are moving towards device
tree.

I submitted an RFC patch to add dreamplug support to Linux (no
devicetree) [2] and I'm currently learning devicetree [3]. Any pointers
anyone might have for ARM devicetree would be much appreciated. ;-)

You can do item #3 on your bullet list with the patches I've submitted
to u-boot [4]. items #1 and #2 require reading from flash to ram, then
hexdumping the ram to stdout over serial and capture to a file on your
computer. Then, revert it to binary. See here [5].

hth,

Jason.

[1] http://www.arm.linux.org.uk/developer/machines/list.php?id=3550
[2] http://comments.gmane.org/gmane.linux.ports.arm.kernel/120507
[3] http://www.spinics.net/lists/arm-kernel/msg135800.html
[4] http://lists.denx.de/pipermail/u-boot/2011-July/097125.html
[5] http://lists.denx.de/pipermail/u-boot/2011-June/094106.html