[U-Boot] [PATCH 03/15] Nokia RX-51 aka N900 support

[Mike Frysinger <vapier@gentoo.org>]

On Thursday, September 01, 2011 07:34:29 Pali Roh?r wrote:
> --- /dev/null
> +++ b/board/nokia/rx51/Makefile
>
> +LIB	= $(obj)lib$(BOARD).a
> +$(LIB):	$(obj).depend $(OBJS)
> +	$(AR) $(ARFLAGS) $@ $(OBJS)

your makefiles are old.  the LIB is supposed to be a .o not .a now, and you 
need to call the link command rather than use $(AR).  look at board/bf537-
stamp/Makefile as a simple example.

> --- /dev/null
> +++ b/board/nokia/rx51/config.mk
>
> +TEXT_BASE = 0x80e80000

pretty sure this is old and you should use a CONFIG_xxx in your board config 
header.  then you can delete this config.mk file.

> --- /dev/null
> +++ b/board/nokia/rx51/rx51.c
>
> +GraphicDevice gdev;

no camel case

> +char keymap[] = {
> +	/* normal */
> +	'q',  'o',  'p',  ',', '\b',    0,  'a',  's',
> +	'w',  'd',  'f',  'g',  'h',  'j',  'k',  'l',
> +	'e',  '.',    0,  '\r',   0,  'z',  'x',  'c',
> +	'r',  'v',  'b',  'n',  'm',  ' ',    0,    0,
> +	't',    0,    0,    0,    0,    0,    0,    0,
> +	'y',    0,    0,    0,    0,    0,    0,    0,
> +	'u',    0,    0,    0,    0,    0,    0,    0,
> +	'i',    0,    0,    0,    0,    0,    0,    0,
> +	/* fn */
> +	'1',  '9',  '0',  '=', '\b',    0,  '*',  '+',
> +	'2',  '#',  '-',  '_',  '(',  ')',  '&',  '!',
> +	'3',  '?',    0, '\r',    0,    0,  '$',    0,
> +	'4',  '/', '\\',  '"', '\'',  '@',    0,    0,
> +	'5',    0,    0,    0,    0,    0,    0,    0,
> +	'6',    0,    0,    0,    0,    0,    0,    0,
> +	'7',    0,    0,    0,    0,    0,    0,    0,
> +	'8',    0,    0,    0,    0,    0,    0,    0,
> +};
> +
> +u8 keys[8];
> +u8 old_keys[8] = {0, 0, 0, 0, 0, 0, 0, 0};
> +#define KEYBUF_SIZE 4
> +u8 keybuf[KEYBUF_SIZE];
> +u8 keybuf_head = 0, keybuf_tail = 0;

these probably all should be static.  and "keymap[]" should probably also be 
const.

> --- /dev/null
> +++ b/board/nokia/rx51/rx51.h
>
> +const omap3_sysinfo sysinfo = {

you should not be defining variable storage in header files

> +/*
> + * IEN  - Input Enable
> + * IDIS - Input Disable
> + * PTD  - Pull type Down
> + * PTU  - Pull type Up
> + * DIS  - Pull type selection is inactive
> + * EN   - Pull type selection is active
> + * M0   - Mode 0
> + * The commented string gives the final mux configuration for that pin
> + */

this looks like SoC info and not board specific.  should this be in an SoC 
header somewhere instead ?
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110901/3179f005/attachment.pgp