From mboxrd@z Thu Jan 1 00:00:00 1970 From: George G. Davis Date: Tue, 6 Sep 2011 21:25:51 -0400 Subject: [U-Boot] [PATCH 05/10] ARM: remove broken "gcplus" board. In-Reply-To: <1315226254-16826-6-git-send-email-wd@denx.de> References: <1315226254-16826-1-git-send-email-wd@denx.de> <1315226254-16826-6-git-send-email-wd@denx.de> Message-ID: <20110907012551.GP95870@mvista.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Sep 05, 2011 at 02:37:29PM +0200, Wolfgang Denk wrote: > Signed-off-by: Wolfgang Denk > Cc: Albert ARIBAUD > Cc: George G. Davis Ack, Thanks! -- Regards, George > --- > MAINTAINERS | 4 - > board/gcplus/Makefile | 53 ----- > board/gcplus/config.mk | 13 -- > board/gcplus/flash.c | 438 ------------------------------------------ > board/gcplus/gcplus.c | 82 -------- > board/gcplus/lowlevel_init.S | 77 -------- > boards.cfg | 1 - > doc/README.scrapyard | 1 + > include/configs/gcplus.h | 185 ------------------ > 9 files changed, 1 insertions(+), 853 deletions(-) > delete mode 100644 board/gcplus/Makefile > delete mode 100644 board/gcplus/config.mk > delete mode 100644 board/gcplus/flash.c > delete mode 100644 board/gcplus/gcplus.c > delete mode 100644 board/gcplus/lowlevel_init.S > delete mode 100644 include/configs/gcplus.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index 83d3656..b001f64 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -624,10 +624,6 @@ Eric Cooper > > dockstar ARM926EJS (Kirkwood SoC) > > -George G. Davis > - > - gcplus SA1100 > - > Wolfgang Denk > imx27lite i.MX27 > qong i.MX31 > diff --git a/board/gcplus/Makefile b/board/gcplus/Makefile > deleted file mode 100644 > index e62aa1b..0000000 > --- a/board/gcplus/Makefile > +++ /dev/null > @@ -1,53 +0,0 @@ > -# > -# (C) Copyright 2000-2006 > -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. > -# > -# 2003 (c) MontaVista Software, Inc. > -# > -# See file CREDITS for list of people who contributed to this > -# project. > -# > -# This program is free software; you can redistribute it and/or > -# modify it under the terms of the GNU General Public License as > -# published by the Free Software Foundation; either version 2 of > -# the License, or (at your option) any later version. > -# > -# This program is distributed in the hope that it will be useful, > -# but WITHOUT ANY WARRANTY; without even the implied warranty of > -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > -# GNU General Public License for more details. > -# > -# You should have received a copy of the GNU General Public License > -# along with this program; if not, write to the Free Software > -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, > -# MA 02111-1307 USA > -# > - > -include $(TOPDIR)/config.mk > - > -LIB = $(obj)lib$(BOARD).o > - > -COBJS := gcplus.o flash.o > -SOBJS := lowlevel_init.o > - > -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) > -OBJS := $(addprefix $(obj),$(COBJS)) > -SOBJS := $(addprefix $(obj),$(SOBJS)) > - > -$(LIB): $(obj).depend $(OBJS) $(SOBJS) > - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) > - > -clean: > - rm -f $(SOBJS) $(OBJS) > - > -distclean: clean > - rm -f $(LIB) core *.bak $(obj).depend > - > -######################################################################### > - > -# defines $(obj).depend target > -include $(SRCTREE)/rules.mk > - > -sinclude $(obj).depend > - > -######################################################################### > diff --git a/board/gcplus/config.mk b/board/gcplus/config.mk > deleted file mode 100644 > index a9bd3ff..0000000 > --- a/board/gcplus/config.mk > +++ /dev/null > @@ -1,13 +0,0 @@ > -# > -# ADS GCPlus board with SA1110 cpu > -# > -# The ADS GCPlus has 2 banks of 16 MiB SDRAM > -# > -# We use the ADS GCPlus Linux boot ROM to load U-Boot into SDRAM > -# at c020'0000 and then move ourself to c8f0'0000. Basically, just > -# install the U-Boot binary as you would the Linux zImage and then > -# reap the benfits of more convenient Linux development cycles, i.e. > -# bootp;tftp;bootm, repeat, etc.,. > -# > - > -CONFIG_SYS_TEXT_BASE = 0xc8f00000 > diff --git a/board/gcplus/flash.c b/board/gcplus/flash.c > deleted file mode 100644 > index ab567e8..0000000 > --- a/board/gcplus/flash.c > +++ /dev/null > @@ -1,438 +0,0 @@ > -/* > - * (C) Copyright 2001 > - * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net > - * > - * (C) Copyright 2001 > - * Wolfgang Denk, DENX Software Engineering, wd at denx.de. > - * > - * 2003 (c) MontaVista Software, Inc. > - * > - * See file CREDITS for list of people who contributed to this > - * project. > - * > - * This program is free software; you can redistribute it and/or > - * modify it under the terms of the GNU General Public License as > - * published by the Free Software Foundation; either version 2 of > - * the License, or (at your option) any later version. > - * > - * This program is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - * > - * You should have received a copy of the GNU General Public License > - * along with this program; if not, write to the Free Software > - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > - * MA 02111-1307 USA > - */ > - > -#include > -#include > - > -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ > - > -/* Board support for 1 or 2 flash devices */ > -#define FLASH_PORT_WIDTH32 > -#undef FLASH_PORT_WIDTH16 > - > -#ifdef FLASH_PORT_WIDTH16 > -#define FLASH_PORT_WIDTH ushort > -#define FLASH_PORT_WIDTHV vu_short > -#define SWAP(x) __swab16(x) > -#else > -#define FLASH_PORT_WIDTH ulong > -#define FLASH_PORT_WIDTHV vu_long > -#define SWAP(x) __swab32(x) > -#endif > - > -#define FPW FLASH_PORT_WIDTH > -#define FPWV FLASH_PORT_WIDTHV > - > -#define mb() __asm__ __volatile__ ("" : : : "memory") > - > -/*----------------------------------------------------------------------- > - * Functions > - */ > -static ulong flash_get_size(FPW * addr, flash_info_t * info); > -static int write_data(flash_info_t * info, ulong dest, FPW data); > -static void flash_get_offsets(ulong base, flash_info_t * info); > -void inline spin_wheel(void); > - > -/*----------------------------------------------------------------------- > - */ > - > -unsigned long > -flash_init(void) > -{ > - int i; > - ulong size = 0; > - > - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { > - switch (i) { > - case 0: > - flash_get_size((FPW *) PHYS_FLASH_1, &flash_info[i]); > - flash_get_offsets(PHYS_FLASH_1, &flash_info[i]); > - break; > - default: > - panic("configured too many flash banks!\n"); > - break; > - } > - size += flash_info[i].size; > - } > - > - /* Protect monitor and environment sectors > - */ > - flash_protect(FLAG_PROTECT_SET, > - CONFIG_SYS_FLASH_BASE, > - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]); > - > - flash_protect(FLAG_PROTECT_SET, > - CONFIG_ENV_ADDR, > - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); > - > - return size; > -} > - > -/*----------------------------------------------------------------------- > - */ > -static void > -flash_get_offsets(ulong base, flash_info_t * info) > -{ > - int i; > - > - if (info->flash_id == FLASH_UNKNOWN) { > - return; > - } > - > - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { > - for (i = 0; i < info->sector_count; i++) { > - info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); > - info->protect[i] = 0; > - } > - } > -} > - > -/*----------------------------------------------------------------------- > - */ > -void > -flash_print_info(flash_info_t * info) > -{ > - int i; > - > - if (info->flash_id == FLASH_UNKNOWN) { > - printf("missing or unknown FLASH type\n"); > - return; > - } > - > - switch (info->flash_id & FLASH_VENDMASK) { > - case FLASH_MAN_INTEL: > - printf("INTEL "); > - break; > - default: > - printf("Unknown Vendor "); > - break; > - } > - > - switch (info->flash_id & FLASH_TYPEMASK) { > - case FLASH_28F128J3A: > - printf("28F128J3A\n"); > - break; > - case FLASH_28F640J5: > - printf("28F640J5\n"); > - break; > - default: > - printf("Unknown Chip Type\n"); > - break; > - } > - > - printf(" Size: %ld MB in %d Sectors\n", > - info->size >> 20, info->sector_count); > - > - printf(" Sector Start Addresses:"); > - for (i = 0; i < info->sector_count; ++i) { > - if ((i % 5) == 0) > - printf("\n "); > - printf(" %08lX%s", > - info->start[i], info->protect[i] ? " (RO)" : " "); > - } > - printf("\n"); > - return; > -} > - > -/* > - * The following code cannot be run from FLASH! > - */ > -static ulong > -flash_get_size(FPW * addr, flash_info_t * info) > -{ > - volatile FPW value; > - /* Write auto select command: read Manufacturer ID */ > - addr[0x5555] = (FPW) 0x00AA00AA; > - addr[0x2AAA] = (FPW) 0x00550055; > - addr[0x5555] = (FPW) 0x00900090; > - > - mb(); > - value = addr[0]; > - > - switch (value) { > - > - case (FPW) INTEL_MANUFACT: > - info->flash_id = FLASH_MAN_INTEL; > - break; > - > - default: > - info->flash_id = FLASH_UNKNOWN; > - info->sector_count = 0; > - info->size = 0; > - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ > - return (0); /* no or unknown flash */ > - } > - > - mb(); > - value = addr[1]; /* device ID */ > - switch (value) { > - case (FPW) INTEL_ID_28F128J3A: > - info->flash_id += FLASH_28F128J3A; > - info->sector_count = 128; > - info->size = 0x02000000; > - break; /* => 16 MB */ > - case (FPW) INTEL_ID_28F640J5: > - info->flash_id += FLASH_28F640J5; > - info->sector_count = 64; > - info->size = 0x01000000; > - break; /* => 16 MB */ > - > - default: > - info->flash_id = FLASH_UNKNOWN; > - break; > - } > - > - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { > - printf("** ERROR: sector count %d > max (%d) **\n", > - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); > - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; > - } > - > - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ > - > - return (info->size); > -} > - > -/*----------------------------------------------------------------------- > - */ > - > -int > -flash_erase(flash_info_t * info, int s_first, int s_last) > -{ > - int flag, prot, sect; > - ulong type, start; > - int rcode = 0; > - > - if ((s_first < 0) || (s_first > s_last)) { > - if (info->flash_id == FLASH_UNKNOWN) { > - printf("- missing\n"); > - } else { > - printf("- no sectors to erase\n"); > - } > - return 1; > - } > - > - type = (info->flash_id & FLASH_VENDMASK); > - if ((type != FLASH_MAN_INTEL)) { > - printf("Can't erase unknown flash type %08lx - aborted\n", > - info->flash_id); > - return 1; > - } > - > - prot = 0; > - for (sect = s_first; sect <= s_last; ++sect) { > - if (info->protect[sect]) { > - prot++; > - } > - } > - > - if (prot) { > - printf("- Warning: %d protected sectors will not be erased!\n", > - prot); > - } else { > - printf("\n"); > - } > - > - /* Disable interrupts which might cause a timeout here */ > - flag = disable_interrupts(); > - > - /* Start erase on unprotected sectors */ > - for (sect = s_first; sect <= s_last; sect++) { > - if (info->protect[sect] == 0) { /* not protected */ > - FPWV *addr = (FPWV *) (info->start[sect]); > - FPW status; > - > - printf("Erasing sector %2d ... ", sect); > - > - /* arm simple, non interrupt dependent timer */ > - start = get_timer(0); > - > - *addr = (FPW) 0x00500050; /* clear status register */ > - *addr = (FPW) 0x00200020; /* erase setup */ > - *addr = (FPW) 0x00D000D0; /* erase confirm */ > - > - while (((status = > - *addr) & (FPW) 0x00800080) != > - (FPW) 0x00800080) { > - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { > - printf("Timeout\n"); > - *addr = (FPW) 0x00B000B0; /* suspend erase */ > - *addr = (FPW) 0x00FF00FF; /* reset to read mode */ > - rcode = 1; > - break; > - } > - } > - > - *addr = (FPW) 0x00500050; /* clear status register cmd. */ > - *addr = (FPW) 0x00FF00FF; /* resest to read mode */ > - > - printf(" done\n"); > - } > - } > - return rcode; > -} > - > -/*----------------------------------------------------------------------- > - * Copy memory to flash, returns: > - * 0 - OK > - * 1 - write timeout > - * 2 - Flash not erased > - * 4 - Flash not identified > - */ > - > -int > -write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) > -{ > - ulong cp, wp; > - FPW data; > - int count, i, l, rc, port_width; > - > - if (info->flash_id == FLASH_UNKNOWN) { > - return 4; > - } > -/* get lower word aligned address */ > -#ifdef FLASH_PORT_WIDTH16 > - wp = (addr & ~1); > - port_width = 2; > -#else > - wp = (addr & ~3); > - port_width = 4; > -#endif > - > - /* > - * handle unaligned start bytes > - */ > - if ((l = addr - wp) != 0) { > - data = 0; > - for (i = 0, cp = wp; i < l; ++i, ++cp) { > - data = (data << 8) | (*(uchar *) cp); > - } > - for (; i < port_width && cnt > 0; ++i) { > - data = (data << 8) | *src++; > - --cnt; > - ++cp; > - } > - for (; cnt == 0 && i < port_width; ++i, ++cp) { > - data = (data << 8) | (*(uchar *) cp); > - } > - > - if ((rc = write_data(info, wp, SWAP(data))) != 0) { > - return (rc); > - } > - wp += port_width; > - } > - > - /* > - * handle word aligned part > - */ > - count = 0; > - while (cnt >= port_width) { > - data = 0; > - for (i = 0; i < port_width; ++i) { > - data = (data << 8) | *src++; > - } > - if ((rc = write_data(info, wp, SWAP(data))) != 0) { > - return (rc); > - } > - wp += port_width; > - cnt -= port_width; > - if (count++ > 0x800) { > - spin_wheel(); > - count = 0; > - } > - } > - > - if (cnt == 0) { > - return (0); > - } > - > - /* > - * handle unaligned tail bytes > - */ > - data = 0; > - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { > - data = (data << 8) | *src++; > - --cnt; > - } > - for (; i < port_width; ++i, ++cp) { > - data = (data << 8) | (*(uchar *) cp); > - } > - > - return (write_data(info, wp, SWAP(data))); > -} > - > -/*----------------------------------------------------------------------- > - * Write a word or halfword to Flash, returns: > - * 0 - OK > - * 1 - write timeout > - * 2 - Flash not erased > - */ > -static int > -write_data(flash_info_t * info, ulong dest, FPW data) > -{ > - FPWV *addr = (FPWV *) dest; > - ulong status; > - int flag; > - ulong start; > - > - /* Check if Flash is (sufficiently) erased */ > - if ((*addr & data) != data) { > - printf("not erased at %08lX (%lX)\n", (ulong) addr, *addr); > - return (2); > - } > - /* Disable interrupts which might cause a timeout here */ > - flag = disable_interrupts(); > - > - *addr = (FPW) 0x00400040; /* write setup */ > - *addr = data; > - > - /* arm simple, non interrupt dependent timer */ > - start = get_timer(0); > - > - /* wait while polling the status register */ > - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { > - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { > - *addr = (FPW) 0x00FF00FF; /* restore read mode */ > - return (1); > - } > - } > - > - *addr = (FPW) 0x00FF00FF; /* restore read mode */ > - > - return (0); > -} > - > -void inline > -spin_wheel(void) > -{ > - static int p = 0; > - static char w[] = "\\/-"; > - > - printf("\010%c", w[p]); > - (++p == 3) ? (p = 0) : 0; > -} > diff --git a/board/gcplus/gcplus.c b/board/gcplus/gcplus.c > deleted file mode 100644 > index 71607f2..0000000 > --- a/board/gcplus/gcplus.c > +++ /dev/null > @@ -1,82 +0,0 @@ > -/* > - * (C) Copyright 2002 > - * Sysgo Real-Time Solutions, GmbH > - * Marius Groeger > - * > - * 2003-2004 (c) MontaVista Software, Inc. > - * > - * See file CREDITS for list of people who contributed to this > - * project. > - * > - * This program is free software; you can redistribute it and/or > - * modify it under the terms of the GNU General Public License as > - * published by the Free Software Foundation; either version 2 of > - * the License, or (at your option) any later version. > - * > - * This program is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - * > - * You should have received a copy of the GNU General Public License > - * along with this program; if not, write to the Free Software > - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > - * MA 02111-1307 USA > - */ > - > -#include > -#include > -#include > - > -DECLARE_GLOBAL_DATA_PTR; > - > -/* > - * Miscelaneous platform dependent initialisations > - */ > - > -int > -board_init(void) > -{ > - gd->bd->bi_arch_number = MACH_TYPE_GRAPHICSCLIENT; > - > - gd->bd->bi_boot_params = 0xc000003c; /* Weird address? */ > - > - /* Most of the ADS GCPlus I/O is connected to Static nCS2. > - * So I'm brute forcing nCS2 timiming here for worst case. > - */ > - MSC1 &= ~0xFFFF; > - MSC1 |= 0x8649; > - > - /* Nothing is connected to Static nCS4 or nCS5. But I'm using > - * nCS4 as a paranoia safe guard to force nCS2, nOE; nWE high > - * after accessing I/O via (non-VLIO) nCS2. What can I say, I'm > - * paranoid and lack decent tools to alleviate my fear. I sure > - * do wish I had a logic analyzer. : ( > - */ > - > - MSC2 = 0xfff9fff9; > - > - return 0; > -} > - > -int > -dram_init(void) > -{ > - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; > - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; > - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; > - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; > - > - return (0); > -} > - > -#ifdef CONFIG_CMD_NET > -int board_eth_init(bd_t *bis) > -{ > - int rc = 0; > -#ifdef CONFIG_LAN91C96 > - rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); > -#endif > - return rc; > -} > -#endif > diff --git a/board/gcplus/lowlevel_init.S b/board/gcplus/lowlevel_init.S > deleted file mode 100644 > index f292c4d..0000000 > --- a/board/gcplus/lowlevel_init.S > +++ /dev/null > @@ -1,77 +0,0 @@ > -/* > - * Memory Setup stuff - taken from blob memsetup.S > - * > - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and > - * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl) > - * 2003-2004 (c) MontaVista Software, Inc. > - * > - * See file CREDITS for list of people who contributed to this > - * project. > - * > - * This program is free software; you can redistribute it and/or > - * modify it under the terms of the GNU General Public License as > - * published by the Free Software Foundation; either version 2 of > - * the License, or (at your option) any later version. > - * > - * This program is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - * > - * You should have received a copy of the GNU General Public License > - * along with this program; if not, write to the Free Software > - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > - * MA 02111-1307 USA > - */ > - > - > -#include "config.h" > -#include "version.h" > - > - > - .globl lowlevel_init > -lowlevel_init: > - /* The ADS GC+ for Linux Boot Rom Ver. 1.73 does memory init for us. > - * However the darn thing leaves the MMU enabled before handing control > - * over to us. So we need to disable the MMU and we use lowlevel_init > - * to do it. > - */ > - > -@ The following code segment was borrowed with gratitude from: > -@ linux-2.4.19-rmk7/arch/arm/boot/compressed/head-sa1100.S > - > - @ Data cache might be active. > - @ Be sure to flush kernel binary out of the cache, > - @ whatever state it is, before it is turned off. > - @ This is done by fetching through currently executed > - @ memory to be sure we hit the same cache. > - bic r2, pc, #0x1f > - add r3, r2, #0x4000 @ 16 kb is quite enough... > -1: ldr r0, [r2], #32 > - teq r2, r3 > - bne 1b > - mcr p15, 0, r0, c7, c10, 4 @ drain WB > - mcr p15, 0, r0, c7, c7, 0 @ flush I & D caches > - > - @ disabling MMU and caches > - mrc p15, 0, r0, c1, c0, 0 @ read control reg > - bic r0, r0, #0x0d @ clear WB, DC, MMU > - bic r0, r0, #0x1000 @ clear Icache > - mcr p15, 0, r0, c1, c0, 0 > - > - nop > - nop > - nop > - nop > - nop > - > - b 2f > -2: > - nop > - nop > - nop > - nop > - nop > - > - > - mov pc, lr > diff --git a/boards.cfg b/boards.cfg > index 940909f..6e2c5e1 100644 > --- a/boards.cfg > +++ b/boards.cfg > @@ -219,7 +219,6 @@ xaeniax arm pxa > xm250 arm pxa > zipitz2 arm pxa > zylonite arm pxa > -gcplus arm sa1100 > jornada arm sa1100 > lart arm sa1100 > shannon arm sa1100 > diff --git a/doc/README.scrapyard b/doc/README.scrapyard > index f0da31c..d137090 100644 > --- a/doc/README.scrapyard > +++ b/doc/README.scrapyard > @@ -11,6 +11,7 @@ easily if here is something they might want to dig for... > > Board Arch CPU removed Commit last known maintainer/contact > ============================================================================= > +gcplus arm sa1100 - 2011-09-05 George G. Davis > evb4510 arm arm720t - 2011-09-05 Curt Brune > ep7312 arm arm720t - 2011-09-05 Marius Gr?ger > dnp1110 arm sa1100 - 2011-09-05 Alex Z?pke > diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h > deleted file mode 100644 > index 9412daa..0000000 > --- a/include/configs/gcplus.h > +++ /dev/null > @@ -1,185 +0,0 @@ > -/* > - * (C) Copyright 2002 > - * Sysgo Real-Time Solutions, GmbH > - * Marius Groeger > - * > - * 2003-2004 (c) MontaVista Software, Inc. > - * > - * Configuation settings for the ADS GraphicsClient+ board. > - * > - * See file CREDITS for list of people who contributed to this > - * project. > - * > - * This program is free software; you can redistribute it and/or > - * modify it under the terms of the GNU General Public License as > - * published by the Free Software Foundation; either version 2 of > - * the License, or (at your option) any later version. > - * > - * This program is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - * > - * You should have received a copy of the GNU General Public License > - * along with this program; if not, write to the Free Software > - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > - * MA 02111-1307 USA > - */ > - > -#ifndef __CONFIG_H > -#define __CONFIG_H > - > -/* > - * The ADS GCPlus Linux boot ROM loads U-Boot into RAM at 0xc0200000. > - * We don't actually init RAM in this case since we're using U-Boot as > - * an secondary boot loader during Linux kernel development and testing, > - * e.g. bootp/tftp download of the kernel is a far more convenient > - * when testing new kernels on this target. However the ADS GCPlus Linux > - * boot ROM leaves the MMU enabled when it passes control to U-Boot. So > - * we use lowlevel_init (!CONFIG_SKIP_LOWLEVEL_INIT) to remedy that problem. > - */ > -#undef CONFIG_SKIP_LOWLEVEL_INIT > - > -/* > - * High Level Configuration Options > - * (easy to change) > - */ > -#define CONFIG_SA1110 1 /* This is an SA1100 CPU */ > -#define CONFIG_GCPLUS 1 /* on an ADS GCPlus Board */ > - > -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ > -/* we will never enable dcache, because we have to setup MMU first */ > -#define CONFIG_SYS_DCACHE_OFF > - > -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ > -#define CONFIG_SETUP_MEMORY_TAGS 1 > -#define CONFIG_INITRD_TAG 1 > - > -/* > - * Size of malloc() pool > - */ > -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) > - > - > -/* > - * Hardware drivers > - */ > -#define CONFIG_NET_MULTI > -#define CONFIG_LAN91C96 /* we have an SMC9194 on-board */ > -#define CONFIG_LAN91C96_BASE 0x100e0000 > - > -/* > - * select serial console configuration > - */ > -#define CONFIG_SA1100_SERIAL > -#define CONFIG_SERIAL3 1 /* we use SERIAL 3 on ADS GCPlus */ > - > -/* allow to overwrite serial and ethaddr */ > -#define CONFIG_ENV_OVERWRITE > - > -#define CONFIG_BAUDRATE 38400 > - > - > -/* > - * Command line configuration. > - */ > -#include > - > -#define CONFIG_CMD_DHCP > - > - > -/* > - * BOOTP options > - */ > -#define CONFIG_BOOTP_SUBNETMASK > -#define CONFIG_BOOTP_GATEWAY > -#define CONFIG_BOOTP_HOSTNAME > -#define CONFIG_BOOTP_BOOTPATH > - > - > -#define CONFIG_BOOTDELAY 3 > -#define CONFIG_BOOTARGS "console=ttySA0,38400n8 mtdparts=sa1100-flash:1m at 0(zImage),3m at 1m(ramdisk.gz),12m at 4m(userfs) root=/dev/nfs ip=bootp" > -#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" > -#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ > - > -#if defined(CONFIG_CMD_KGDB) > -#define CONFIG_KGDB_BAUDRATE 38400 /* speed to run kgdb serial port */ > -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ > -#endif > - > -/* > - * Miscellaneous configurable options > - */ > -#define CONFIG_SYS_LONGHELP /* undef to save memory */ > -#define CONFIG_SYS_PROMPT "ADS GCPlus # " /* Monitor Command Prompt */ > -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ > -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ > -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ > -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ > - > -#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */ > -#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */ > - > -#define CONFIG_SYS_LOAD_ADDR 0xc0000000 /* default load address */ > - > -#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ > -#define CONFIG_SYS_CPUSPEED 0x0a /* set core clock to 206MHz */ > - > - /* valid baudrates */ > -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } > - > -/*----------------------------------------------------------------------- > - * Stack sizes > - * > - * The stack sizes are set up in start.S using the settings below > - */ > -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ > -#ifdef CONFIG_USE_IRQ > -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ > -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ > -#endif > - > -/*----------------------------------------------------------------------- > - * Physical Memory Map > - */ > -#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 banks of DRAM */ > -#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ > -#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */ > -#define PHYS_SDRAM_2 0xc8000000 /* SDRAM Bank #2 */ > -#define PHYS_SDRAM_2_SIZE 0x01000000 /* 16 MB */ > - > - > -#define PHYS_FLASH_1 0x08000000 /* Flash Bank #1 */ > -#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */ > -#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */ > -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ > - > -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 > - > -/*----------------------------------------------------------------------- > - * FLASH and environment organization > - */ > -#if 1 > -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ > -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ > - > -/* timeout values are in ticks */ > -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ > -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ > -#else > -/* REVISIT: This doesn't work on ADS GCPlus just yet: */ > -#define CONFIG_SYS_FLASH_CFI 1 /* flash is CFI conformant */ > -#define CONFIG_FLASH_CFI_DRIVER 1 /* use common cfi driver */ > -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ > -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */ > -#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */ > -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max # of sectors on one chip */ > -/*#define CONFIG_SYS_FLASH_PROTECTION 1 /--* hardware flash protection */ > -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } > -#endif > - > -#define CONFIG_ENV_IS_IN_FLASH 1 > -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE) /* Addr of Environment Sector */ > -#define CONFIG_ENV_SIZE PHYS_FLASH_SECT_SIZE > - > -#endif /* __CONFIG_H */ > -- > 1.7.6