From: Marek Vasut <marek.vasut@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] u-boot-1.3.3 SMC91111 driver
Date: Thu, 15 Sep 2011 20:24:04 +0200 [thread overview]
Message-ID: <201109152024.05076.marek.vasut@gmail.com> (raw)
In-Reply-To: <4E72033E.90002@gmail.com>
On Thursday, September 15, 2011 03:53:02 PM Simon Schwarz wrote:
> Hi,
>
> first thing would be to use a current U-Boot Version. This can be
> obtained from:
> http://www.denx.de/wiki/U-Boot/SourceCode
Try not top-posting please.
btw. the lowlevel init function also configures the hardware, maybe you should
remove blob and replace it with uboot ... and use mainline version, like Simon
suggested, 1.3.3 is _way_ too old.
Cheers
>
> Regards
> Simon
>
> On 09/15/2011 03:31 PM, Chaney Lee wrote:
> > hello:
> >
> > I need your advise.
> > I port the u-boot-1.3.3 to my PXA270 board?Every thing works well but
> > the SMC91111 dirver.I have aready config the config file like this:
> > #define CONFIG_DRIVER_SMC91111 1
> > #define CONFIG_SMC91111_BASE 0x10000300
> > #define CONFIG_SMC91111_EXT_PHY
> >
> > #define CONFIG_SMC_USE_32_BIT 1
> >
> > Then I use PING command to my host and the minicom shows the host is not
> > alive.But I am sure the host is right because I had PING the host ,which
> > is in VMware.
> > And after I turn on the DEBUG of SMC91111.c to 5 ,I get the message.Here
> > are part of them.
> >
> > SMC91111: smc_hardware_send_packet
> > SMC91111: memory allocation, try 1 failed ...
> > SMC91111: memory allocation, try 2 failed ...
> > SMC91111: memory allocation, try 3 failed ...
> > SMC91111: memory allocation, try 4 failed ...
> > SMC91111: memory allocation, try 5 failed ...
> >
> > So how can I fix this problem?Can you give me some suggestions?
> > ps:my u-boot run in RAM and boot from BLOB.Then the u-boot.bin skip the
> > lowlevel_init function.
> >
> > Thank you !
> >
> >
> >
> >
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
prev parent reply other threads:[~2011-09-15 18:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-15 13:31 [U-Boot] u-boot-1.3.3 SMC91111 driver Chaney Lee
2011-09-15 13:53 ` Simon Schwarz
2011-09-15 18:24 ` Marek Vasut [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201109152024.05076.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox