[U-Boot] [PATCH 1/2] Tegra2: Make XTal speed configurable

[Marek Vasut <marek.vasut@gmail.com>]

On Wednesday, October 05, 2011 04:10:56 PM Simon Glass wrote:
> Hi Marek,
> 
> On Fri, Sep 30, 2011 at 5:12 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
> > The Toradex T20 module uses 13MHz Xtal, so make the Xtal speed
> > configurable.
> > 
> > Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> > Cc: Simon Glass <sjg@chromium.org>
> > Cc: Ben Warren <biggerbadderben@gmail.com>
> > Cc: Tom Warren <twarren.nvidia@gmail.com>
> > Cc: Stephen Warren <swarren@nvidia.com>
> > ---
> >  arch/arm/cpu/armv7/tegra2/ap20.c |    9 +++++++--
> >  1 files changed, 7 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/cpu/armv7/tegra2/ap20.c
> > b/arch/arm/cpu/armv7/tegra2/ap20.c index dc5f984..71d9f26 100644
> > --- a/arch/arm/cpu/armv7/tegra2/ap20.c
> > +++ b/arch/arm/cpu/armv7/tegra2/ap20.c
> > @@ -31,6 +31,11 @@
> >  #include <asm/arch/scu.h>
> >  #include <common.h>
> > 
> > +/* The default XTal is 12MHz, some boards might use 13MHz one though */
> > +#ifndef        CONFIG_SYS_TEGRA2_XTAL_MHZ
> > +#define        CONFIG_SYS_TEGRA2_XTAL_MHZ      12
> > +#endif
> > +
> >  u32 s_first_boot = 1;
> > 
> >  void init_pllx(void)
> > @@ -46,8 +51,8 @@ void init_pllx(void)
> >        /* Set PLLX_MISC */
> >        writel(1 << PLL_CPCON_SHIFT, &pll->pll_misc);
> > 
> > -       /* Use 12MHz clock here */
> > -       reg = PLL_BYPASS_MASK | (12 << PLL_DIVM_SHIFT);
> > +       /* Use 13MHz clock here */
> 
> Change comment?
> 
> > +       reg = PLL_BYPASS_MASK | (CONFIG_SYS_TEGRA2_XTAL_MHZ <<
> > PLL_DIVM_SHIFT); reg |= 1000 << PLL_DIVN_SHIFT;
> >        writel(reg, &pll->pll_base);
> > 
> > --
> > 1.7.5.4
> 
> Regards,
> Simon

Hi Simon, I'll probably also change the board.c to support this. But then, can't 
the board.c be moved to arch/arm/cpu/armv7/tegra... and it's functions exported 
via standard header ? Cheers