* [U-Boot] [PATCH] gpio: Add PCA9698 40-bit I2C I/O port
@ 2011-10-04 9:13 eibach at gdsys.de
2011-10-18 14:23 ` Stefan Roese
2011-10-21 22:43 ` Wolfgang Denk
0 siblings, 2 replies; 10+ messages in thread
From: eibach at gdsys.de @ 2011-10-04 9:13 UTC (permalink / raw)
To: u-boot
From: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
---
drivers/gpio/Makefile | 1 +
drivers/gpio/pca9698.c | 123 ++++++++++++++++++++++++++++++++++++++++++++++++
include/pca9698.h | 9 ++++
3 files changed, 133 insertions(+), 0 deletions(-)
create mode 100644 drivers/gpio/pca9698.c
create mode 100644 include/pca9698.h
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 62ec97d..38a62c3 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -30,6 +30,7 @@ COBJS-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o
COBJS-$(CONFIG_MARVELL_MFP) += mvmfp.o
COBJS-$(CONFIG_MXC_GPIO) += mxc_gpio.o
COBJS-$(CONFIG_PCA953X) += pca953x.o
+COBJS-$(CONFIG_PCA9698) += pca9698.o
COBJS-$(CONFIG_S5P) += s5p_gpio.o
COBJS-$(CONFIG_TEGRA2_GPIO) += tegra2_gpio.o
COBJS-$(CONFIG_DA8XX_GPIO) += da8xx_gpio.o
diff --git a/drivers/gpio/pca9698.c b/drivers/gpio/pca9698.c
new file mode 100644
index 0000000..b946efa
--- /dev/null
+++ b/drivers/gpio/pca9698.c
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2011
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach at gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Driver for NXP's pca9698 40 bit I2C gpio expander
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <pca9698.h>
+
+/*
+ * The pca9698 registers
+ */
+
+#define PCA9698_REG_INPUT 0x00
+#define PCA9698_REG_OUTPUT 0x08
+#define PCA9698_REG_POLARITY 0x10
+#define PCA9698_REG_CONFIG 0x18
+
+#define PCA9698_BUFFER_SIZE 5
+
+static int pca9698_read40(u8 chip, u8 offset, u8 *buffer)
+{
+ u8 command = offset | 0x80; /* autoincrement */
+
+ return i2c_read(chip, command, 1, buffer, PCA9698_BUFFER_SIZE);
+}
+
+static int pca9698_write40(u8 chip, u8 offset, u8 *buffer)
+{
+ u8 command = offset | 0x80; /* autoincrement */
+
+ return i2c_write(chip, command, 1, buffer, PCA9698_BUFFER_SIZE);
+}
+
+static void pca9698_set_bit(unsigned gpio, u8 *buffer, unsigned value)
+{
+ unsigned byte = gpio / 8;
+ unsigned bit = gpio % 8;
+
+ if (value)
+ buffer[byte] |= (1 << bit);
+ else
+ buffer[byte] &= ~(1 << bit);
+}
+
+int pca9698_direction_input(u8 chip, unsigned offset)
+{
+ u8 data[PCA9698_BUFFER_SIZE];
+ int res;
+
+ res = pca9698_read40(chip, PCA9698_REG_CONFIG, data);
+ if (res)
+ return res;
+
+ pca9698_set_bit(offset, data, 1);
+ return pca9698_write40(chip, PCA9698_REG_CONFIG, data);
+}
+
+int pca9698_direction_output(u8 chip, unsigned offset)
+{
+ u8 data[PCA9698_BUFFER_SIZE];
+ int res;
+
+ res = pca9698_read40(chip, PCA9698_REG_CONFIG, data);
+ if (res)
+ return res;
+
+ pca9698_set_bit(offset, data, 0);
+ return pca9698_write40(chip, PCA9698_REG_CONFIG, data);
+}
+
+int pca9698_get_input(u8 chip, unsigned offset)
+{
+ unsigned config_byte = offset / 8;
+ unsigned config_bit = offset % 8;
+ unsigned value;
+ u8 data[PCA9698_BUFFER_SIZE];
+ int res;
+
+ res = pca9698_read40(chip, PCA9698_REG_INPUT, data);
+ if (res)
+ return -1;
+
+ value = data[config_byte] & (1 << config_bit);
+
+ return !!value;
+}
+
+int pca9698_set_output(u8 chip, unsigned offset, int value)
+{
+ u8 data[PCA9698_BUFFER_SIZE];
+ int res;
+
+ res = pca9698_read40(chip, PCA9698_REG_OUTPUT, data);
+ if (res)
+ return res;
+
+ memset(data, sizeof(data), 0);
+ pca9698_set_bit(offset, data, value);
+ return pca9698_write40(chip, PCA9698_REG_OUTPUT, data);
+}
diff --git a/include/pca9698.h b/include/pca9698.h
new file mode 100644
index 0000000..2506088
--- /dev/null
+++ b/include/pca9698.h
@@ -0,0 +1,9 @@
+#ifndef __PCA9698_H_
+#define __PCA9698_H_
+
+int pca9698_direction_input(u8 chip, unsigned offset);
+int pca9698_direction_output(u8 chip, unsigned offset);
+int pca9698_get_input(u8 chip, unsigned offset);
+int pca9698_set_output(u8 chip, unsigned offset, int value);
+
+#endif /* __PCA9698_H_ */
--
1.5.6.5
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH] gpio: Add PCA9698 40-bit I2C I/O port
2011-10-04 9:13 eibach at gdsys.de
@ 2011-10-18 14:23 ` Stefan Roese
2011-10-21 22:43 ` Wolfgang Denk
1 sibling, 0 replies; 10+ messages in thread
From: Stefan Roese @ 2011-10-18 14:23 UTC (permalink / raw)
To: u-boot
Hi Dirk,
On Tuesday 04 October 2011 11:13:51 eibach at gdsys.de wrote:
> From: Dirk Eibach <eibach@gdsys.de>
Checkpatch output:
ERROR: memset size is 3rd argument, not the second.
#239: FILE: drivers/gpio/pca9698.c:120:
+ memset(data, sizeof(data), 0);
total: 1 errors, 0 warnings, 139 lines checked
So, this now really is a good checkpatch feature. I wasn't ware, that it
checked for such bugs as well. Nice. :)
Please fix and resubmit.
Thanks,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH] gpio: Add PCA9698 40-bit I2C I/O port
@ 2011-10-20 9:12 Dirk Eibach
2011-10-20 9:31 ` Stefan Roese
2011-10-23 19:01 ` Wolfgang Denk
0 siblings, 2 replies; 10+ messages in thread
From: Dirk Eibach @ 2011-10-20 9:12 UTC (permalink / raw)
To: u-boot
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
---
drivers/gpio/Makefile | 1 +
drivers/gpio/pca9698.c | 143 ++++++++++++++++++++++++++++++++++++++++++++++++
include/pca9698.h | 34 +++++++++++
3 files changed, 178 insertions(+), 0 deletions(-)
create mode 100644 drivers/gpio/pca9698.c
create mode 100644 include/pca9698.h
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 62ec97d..38a62c3 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -30,6 +30,7 @@ COBJS-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o
COBJS-$(CONFIG_MARVELL_MFP) += mvmfp.o
COBJS-$(CONFIG_MXC_GPIO) += mxc_gpio.o
COBJS-$(CONFIG_PCA953X) += pca953x.o
+COBJS-$(CONFIG_PCA9698) += pca9698.o
COBJS-$(CONFIG_S5P) += s5p_gpio.o
COBJS-$(CONFIG_TEGRA2_GPIO) += tegra2_gpio.o
COBJS-$(CONFIG_DA8XX_GPIO) += da8xx_gpio.o
diff --git a/drivers/gpio/pca9698.c b/drivers/gpio/pca9698.c
new file mode 100644
index 0000000..fe6d2c6
--- /dev/null
+++ b/drivers/gpio/pca9698.c
@@ -0,0 +1,143 @@
+/*
+ * (C) Copyright 2011
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach at gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Driver for NXP's pca9698 40 bit I2C gpio expander
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/errno.h>
+#include <pca9698.h>
+
+/*
+ * The pca9698 registers
+ */
+
+#define PCA9698_REG_INPUT 0x00
+#define PCA9698_REG_OUTPUT 0x08
+#define PCA9698_REG_POLARITY 0x10
+#define PCA9698_REG_CONFIG 0x18
+
+#define PCA9698_BUFFER_SIZE 5
+#define PCA9698_GPIO_COUNT 40
+
+static int pca9698_read40(u8 addr, u8 offset, u8 *buffer)
+{
+ u8 command = offset | 0x80; /* autoincrement */
+
+ return i2c_read(addr, command, 1, buffer, PCA9698_BUFFER_SIZE);
+}
+
+static int pca9698_write40(u8 addr, u8 offset, u8 *buffer)
+{
+ u8 command = offset | 0x80; /* autoincrement */
+
+ return i2c_write(addr, command, 1, buffer, PCA9698_BUFFER_SIZE);
+}
+
+static void pca9698_set_bit(unsigned gpio, u8 *buffer, unsigned value)
+{
+ unsigned byte = gpio / 8;
+ unsigned bit = gpio % 8;
+
+ if (value)
+ buffer[byte] |= (1 << bit);
+ else
+ buffer[byte] &= ~(1 << bit);
+}
+
+int pca9698_request(unsigned gpio, const char *label)
+{
+ if (gpio >= PCA9698_GPIO_COUNT)
+ return -EINVAL;
+
+ return 0;
+}
+
+void pca9698_free(unsigned gpio)
+{
+}
+
+int pca9698_direction_input(u8 addr, unsigned gpio)
+{
+ u8 data[PCA9698_BUFFER_SIZE];
+ int res;
+
+ res = pca9698_read40(addr, PCA9698_REG_CONFIG, data);
+ if (res)
+ return res;
+
+ pca9698_set_bit(gpio, data, 1);
+
+ return pca9698_write40(addr, PCA9698_REG_CONFIG, data);
+}
+
+int pca9698_direction_output(u8 addr, unsigned gpio, int value)
+{
+ u8 data[PCA9698_BUFFER_SIZE];
+ int res;
+
+ res = pca9698_set_value(addr, gpio, value);
+ if (res)
+ return res;
+
+ res = pca9698_read40(addr, PCA9698_REG_CONFIG, data);
+ if (res)
+ return res;
+
+ pca9698_set_bit(gpio, data, 0);
+
+ return pca9698_write40(addr, PCA9698_REG_CONFIG, data);
+}
+
+int pca9698_get_value(u8 addr, unsigned gpio)
+{
+ unsigned config_byte = gpio / 8;
+ unsigned config_bit = gpio % 8;
+ unsigned value;
+ u8 data[PCA9698_BUFFER_SIZE];
+ int res;
+
+ res = pca9698_read40(addr, PCA9698_REG_INPUT, data);
+ if (res)
+ return -1;
+
+ value = data[config_byte] & (1 << config_bit);
+
+ return !!value;
+}
+
+int pca9698_set_value(u8 addr, unsigned gpio, int value)
+{
+ u8 data[PCA9698_BUFFER_SIZE];
+ int res;
+
+ res = pca9698_read40(addr, PCA9698_REG_OUTPUT, data);
+ if (res)
+ return res;
+
+ pca9698_set_bit(gpio, data, value);
+
+ return pca9698_write40(addr, PCA9698_REG_OUTPUT, data);
+}
diff --git a/include/pca9698.h b/include/pca9698.h
new file mode 100644
index 0000000..67b364e
--- /dev/null
+++ b/include/pca9698.h
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2011
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __PCA9698_H_
+#define __PCA9698_H_
+
+int pca9698_request(unsigned gpio, const char *label);
+void pca9698_free(unsigned gpio);
+int pca9698_direction_input(u8 addr, unsigned gpio);
+int pca9698_direction_output(u8 addr, unsigned gpio, int value);
+int pca9698_get_value(u8 addr, unsigned gpio);
+int pca9698_set_value(u8 addr, unsigned gpio, int value);
+
+#endif /* __PCA9698_H_ */
--
1.5.6.5
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH] gpio: Add PCA9698 40-bit I2C I/O port
2011-10-20 9:12 [U-Boot] [PATCH] gpio: Add PCA9698 40-bit I2C I/O port Dirk Eibach
@ 2011-10-20 9:31 ` Stefan Roese
2011-10-20 9:40 ` Eibach, Dirk
2011-10-23 19:01 ` Wolfgang Denk
1 sibling, 1 reply; 10+ messages in thread
From: Stefan Roese @ 2011-10-20 9:31 UTC (permalink / raw)
To: u-boot
On Thursday 20 October 2011 11:12:20 Dirk Eibach wrote:
> Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Next time please update the patch version in the subject and add the changes
below the "---" line. Other than this:
Acked-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH] gpio: Add PCA9698 40-bit I2C I/O port
2011-10-20 9:31 ` Stefan Roese
@ 2011-10-20 9:40 ` Eibach, Dirk
0 siblings, 0 replies; 10+ messages in thread
From: Eibach, Dirk @ 2011-10-20 9:40 UTC (permalink / raw)
To: u-boot
> Next time please update the patch version in the subject and
> add the changes below the "---" line. Other than this:
Oops, wrong serialization of save / git-send-email. I did a resend.
Cheers
Dirk
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH] gpio: Add PCA9698 40-bit I2C I/O port
2011-10-04 9:13 eibach at gdsys.de
2011-10-18 14:23 ` Stefan Roese
@ 2011-10-21 22:43 ` Wolfgang Denk
1 sibling, 0 replies; 10+ messages in thread
From: Wolfgang Denk @ 2011-10-21 22:43 UTC (permalink / raw)
To: u-boot
Dear eibach at gdsys.de,
In message <1317719635-2792-1-git-send-email-eibach@gdsys.de> you wrote:
> From: Dirk Eibach <eibach@gdsys.de>
>
> Signed-off-by: Dirk Eibach <eibach@gdsys.de>
> ---
> drivers/gpio/Makefile | 1 +
> drivers/gpio/pca9698.c | 123 ++++++++++++++++++++++++++++++++++++++++++++++++
> include/pca9698.h | 9 ++++
> 3 files changed, 133 insertions(+), 0 deletions(-)
> create mode 100644 drivers/gpio/pca9698.c
> create mode 100644 include/pca9698.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore all
progress depends on the unreasonable man." - George Bernard Shaw
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH] gpio: Add PCA9698 40-bit I2C I/O port
2011-10-20 9:12 [U-Boot] [PATCH] gpio: Add PCA9698 40-bit I2C I/O port Dirk Eibach
2011-10-20 9:31 ` Stefan Roese
@ 2011-10-23 19:01 ` Wolfgang Denk
2011-10-26 6:44 ` Eibach, Dirk
1 sibling, 1 reply; 10+ messages in thread
From: Wolfgang Denk @ 2011-10-23 19:01 UTC (permalink / raw)
To: u-boot
Dear Dirk Eibach,
In message <1319101940-780-1-git-send-email-eibach@gdsys.de> you wrote:
> Signed-off-by: Dirk Eibach <eibach@gdsys.de>
> ---
> drivers/gpio/Makefile | 1 +
> drivers/gpio/pca9698.c | 143 ++++++++++++++++++++++++++++++++++++++++++++++++
> include/pca9698.h | 34 +++++++++++
> 3 files changed, 178 insertions(+), 0 deletions(-)
> create mode 100644 drivers/gpio/pca9698.c
> create mode 100644 include/pca9698.h
is this some v3 of the patch? If so, where is the change log? What
has been changes?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There is is no reason for any individual to have a computer in their
home. -- Ken Olsen (President of Digital Equipment Corporation),
Convention of the World Future Society, in Boston, 1977
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH] gpio: Add PCA9698 40-bit I2C I/O port
2011-10-23 19:01 ` Wolfgang Denk
@ 2011-10-26 6:44 ` Eibach, Dirk
2011-10-28 6:25 ` Stefan Roese
0 siblings, 1 reply; 10+ messages in thread
From: Eibach, Dirk @ 2011-10-26 6:44 UTC (permalink / raw)
To: u-boot
Dear Wolfgang,
> In message <1319101940-780-1-git-send-email-eibach@gdsys.de>
> you wrote:
> > Signed-off-by: Dirk Eibach <eibach@gdsys.de>
> > ---
> > drivers/gpio/Makefile | 1 +
> > drivers/gpio/pca9698.c | 143
> ++++++++++++++++++++++++++++++++++++++++++++++++
> > include/pca9698.h | 34 +++++++++++
> > 3 files changed, 178 insertions(+), 0 deletions(-) create mode
> > 100644 drivers/gpio/pca9698.c create mode 100644 include/pca9698.h
>
> is this some v3 of the patch? If so, where is the change
> log? What has been changes?
As you can see in http://patchwork.ozlabs.org/patch/120771/ message
archive I did a send without v3 tag and changelog by mistake.
The latest version with tag and changelog is
http://patchwork.ozlabs.org/patch/120777/.
Cheers
Dirk
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH] gpio: Add PCA9698 40-bit I2C I/O port
2011-10-26 6:44 ` Eibach, Dirk
@ 2011-10-28 6:25 ` Stefan Roese
2011-10-28 20:14 ` Wolfgang Denk
0 siblings, 1 reply; 10+ messages in thread
From: Stefan Roese @ 2011-10-28 6:25 UTC (permalink / raw)
To: u-boot
Hi Dirk,
On Wednesday 26 October 2011 08:44:56 Eibach, Dirk wrote:
> > is this some v3 of the patch? If so, where is the change
> > log? What has been changes?
>
> As you can see in http://patchwork.ozlabs.org/patch/120771/ message
> archive I did a send without v3 tag and changelog by mistake.
> The latest version with tag and changelog is
> http://patchwork.ozlabs.org/patch/120777/.
Perhaps its easiest if you could send an incremental patch, to bring the
upstream source to the latest one. As your new PPC4xx board support depends on
the new API.
Otherwise Wolfgang would need to revert the patch
486cad03be46114d726df56721ee27cba52c38e3 and apply the new one.
Wolfgang, what would you prefer? Should Dirk just send an incremental patch?
Best regards,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH] gpio: Add PCA9698 40-bit I2C I/O port
2011-10-28 6:25 ` Stefan Roese
@ 2011-10-28 20:14 ` Wolfgang Denk
0 siblings, 0 replies; 10+ messages in thread
From: Wolfgang Denk @ 2011-10-28 20:14 UTC (permalink / raw)
To: u-boot
Dear Stefan Roese,
In message <201110280825.08189.sr@denx.de> you wrote:
>
> Wolfgang, what would you prefer? Should Dirk just send an incremental patch?
Yes, please.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is more rational to sacrifice one life than six.
-- Spock, "The Galileo Seven", stardate 2822.3
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2011-10-28 20:14 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-10-20 9:12 [U-Boot] [PATCH] gpio: Add PCA9698 40-bit I2C I/O port Dirk Eibach
2011-10-20 9:31 ` Stefan Roese
2011-10-20 9:40 ` Eibach, Dirk
2011-10-23 19:01 ` Wolfgang Denk
2011-10-26 6:44 ` Eibach, Dirk
2011-10-28 6:25 ` Stefan Roese
2011-10-28 20:14 ` Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2011-10-04 9:13 eibach at gdsys.de
2011-10-18 14:23 ` Stefan Roese
2011-10-21 22:43 ` Wolfgang Denk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox