From: Mike Frysinger <vapier@gentoo.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] nds32: toolchains for building ?
Date: Fri, 4 Nov 2011 18:22:32 -0400 [thread overview]
Message-ID: <201111041822.33640.vapier@gentoo.org> (raw)
In-Reply-To: <CACCg+XOGETTkf+bBXvq=QMN=tA5E1MiRx26X6KiBJod5cpCzxw@mail.gmail.com>
On Friday 04 November 2011 04:24:51 ??? wrote:
> It's pity that only you can found the toolchain with full source from
> public is very old.
> I can give you the url as follows.
> http://osdk.andestech.com/
yes, i d/l-ed that monster of a .rar (which contains .tar.gz which themselves
contain .tar.gz .....), but the linker in there segfaults for me :(
for people who want to try building u-boot but skip d/lin a 100MB+ rar, i've
ripped things apart and posted it here as 3MiB:
http://dev.gentoo.org/~vapier/u-boot/nds32.tar.xz
Configuring for adp-ag101 board...
board.c:107: warning: 'pmu_init' defined but not used
cmd_bdinfo.c:489: warning: 'print_lnum' defined but not used
cmd_mmc.c: In function `do_mmcops':
cmd_mmc.c:230: warning: comparison is always false due to limited range of
data type
cmd_mmc.c:245: warning: comparison is always false due to limited range of
data type
ns16550.c: In function `NS16550_init':
ns16550.c:44: warning: passing arg 2 of `writeb' makes pointer from integer
without a cast
/bin/sh: line 1: 28408 Segmentation fault (core dumped) nds32le-linux-ld
--gc-sections --relax -T u-boot.lds -Bstatic -Ttext 0x03200000 $UNDEF_SYM
arch/nds32/cpu/n1213/start.o --start-group api/libapi.o
arch/nds32/cpu/n1213/ag101/libag101.o arch/nds32/cpu/n1213/libn1213.o
arch/nds32/lib/libnds32.o common/libcommon.o disk/libdisk.o
drivers/bios_emulator/libatibiosemu.o drivers/block/libblock.o
drivers/dma/libdma.o drivers/fpga/libfpga.o drivers/gpio/libgpio.o
drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o drivers/input/libinput.o
drivers/misc/libmisc.o drivers/mmc/libmmc.o drivers/mtd/libmtd.o
drivers/mtd/nand/libnand.o drivers/mtd/onenand/libonenand.o
drivers/mtd/spi/libspi_flash.o drivers/mtd/ubi/libubi.o drivers/net/libnet.o
drivers/net/phy/libphy.o drivers/pci/libpci.o drivers/pcmcia/libpcmcia.o
drivers/power/libpower.o drivers/rtc/librtc.o drivers/serial/libserial.o
drivers/spi/libspi.o drivers/twserial/libtws.o drivers/usb/eth/libusb_eth.o
drivers/usb/gadget/libusb_gadget.o drivers/usb/host/libusb_host.o
drivers/usb/musb/libusb_musb.o drivers/usb/phy/libusb_phy.o
drivers/video/libvideo.o drivers/watchdog/libwatchdog.o fs/cramfs/libcramfs.o
fs/ext2/libext2fs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o
fs/reiserfs/libreiserfs.o fs/ubifs/libubifs.o fs/yaffs2/libyaffs2.o
lib/libfdt/libfdt.o lib/libgeneric.o lib/lzma/liblzma.o lib/lzo/liblzo.o
lib/zlib/libz.o net/libnet.o post/libpost.o board/AndesTech/adp-ag101/libadp-
ag101.o --end-group -L /usr/local/src/u-boot/toolchains/nds32le-
linux/bin/../lib/gcc/nds32le-linux/3.4.4 -lgcc -Map u-boot.map -o u-boot
make: *** [u-boot] Error 139
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20111104/9685fef5/attachment.pgp
next prev parent reply other threads:[~2011-11-04 22:22 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-03 17:58 [U-Boot] nds32: toolchains for building ? Mike Frysinger
2011-11-04 8:24 ` 馬克泡
2011-11-04 22:22 ` Mike Frysinger [this message]
2011-11-04 23:20 ` Mike Frysinger
2011-11-05 1:35 ` 馬克泡
2011-11-05 17:04 ` Mike Frysinger
2011-11-10 6:22 ` Macpaul Lin
2011-11-10 16:28 ` Mike Frysinger
2011-11-10 17:01 ` Macpaul Lin
2011-11-10 17:12 ` Mike Frysinger
2011-11-11 2:01 ` Macpaul Lin
2011-11-11 2:08 ` Macpaul Lin
2011-11-11 2:42 ` Mike Frysinger
2011-11-11 2:53 ` Macpaul Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201111041822.33640.vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox