From: Mike Frysinger <vapier@gentoo.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] mvgbe: remove setting of ethaddr within the driver
Date: Tue, 8 Nov 2011 15:49:49 -0500 [thread overview]
Message-ID: <201111081549.50843.vapier@gentoo.org> (raw)
In-Reply-To: <45fd92b472c944e2cb9ebb409488ccfc.squirrel@ssl.serverraum.org>
On Tuesday 08 November 2011 12:34:17 Michael Walle wrote:
> Am Di, 8.11.2011, 16:17 schrieb Wolfgang Denk:
> > Michael Walle wrote:
> >> >> +#define CONFIG_ETH_ADDR 02:50:43:00:00:01
> >> >
> >> > NAK to this. board configs are not allow to hardcode MACs.
> >>
> >> mh, so why is there a CONFIG_ETH_ADDR macro? is it deprecated?
> >> README.enetaddr explicitly refers to that config option.
> >
> > There are situations where it cannot be helped, like when programming
> > the U-Boot image into a ROM (yes, a real ROM that cannot be changed
> > any more by software alone).
> >
> > But in almost all normal situations this must not be used. In any
> > case, we will not accept it into mainline.
>
> I have a Buffalo Linkstation Pro LS-XHL for which i plan to submit a BSP.
> On this board, the MAC address is saved within the environment, which is
> in turn stored in flash. Additionally this board does not have a serial
> port, thus the only available console is the network console.
>
> If someone will mess up the environment, it is possible to clear it by
> holding a button upon powerup. Atm i have the CONFIG_ETH_ADDR set to a
> default MAC address to be able to use the network console with the default
> environment. To restore the original MAC address, a user have to manually
> replace ethaddr with the one printed on the case.
>
> But now, if i can't use the CONFIG_ETH_ADDR, i think i'm stuck :) Or do i
> miss something? (Yeah there may be the MAC randomization, if accepted).
the "default" MAC address would collide with other Buffalo stations which have
the "default" MAC address
by default, ethaddr is not writable, so people can't simply "set ethaddr xxx"
to screw it up.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20111108/df8cdb1b/attachment.pgp
next prev parent reply other threads:[~2011-11-08 20:49 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-07 22:08 [U-Boot] [PATCH] mvgbe: remove setting of ethaddr within the driver Michael Walle
2011-11-08 7:18 ` Prafulla Wadaskar
2011-11-08 13:58 ` Mike Frysinger
2011-11-08 14:10 ` Wolfgang Denk
2011-11-08 13:57 ` Mike Frysinger
2011-11-08 13:45 ` Michael Walle
2011-11-08 14:54 ` Mike Frysinger
2011-11-08 15:17 ` Wolfgang Denk
2011-11-08 17:34 ` Michael Walle
2011-11-08 19:28 ` Wolfgang Denk
2011-11-08 22:30 ` Michael Walle
2011-11-08 22:52 ` Wolfgang Denk
2011-11-08 23:26 ` Michael Walle
2011-11-08 23:38 ` Wolfgang Denk
2011-11-09 8:31 ` Michael Walle
2011-11-09 17:34 ` Michael Walle
2011-11-09 19:27 ` Wolfgang Denk
2011-11-10 9:15 ` Michael Walle
2011-11-10 11:06 ` Simon Guinot
2011-11-10 12:01 ` Wolfgang Denk
2011-11-10 14:21 ` Simon Guinot
2011-11-10 15:53 ` Wolfgang Denk
2011-11-10 16:30 ` Valentin Longchamp
2011-11-10 17:00 ` Holger Brunck
2011-11-10 17:08 ` Mike Frysinger
2011-11-10 17:09 ` Mike Frysinger
2011-11-10 17:54 ` Simon Guinot
2011-11-10 17:46 ` Michael Walle
2011-11-10 11:44 ` Wolfgang Denk
2011-11-16 20:15 ` Michael Walle
2011-11-16 20:26 ` Wolfgang Denk
2011-11-17 8:58 ` Prafulla Wadaskar
2011-11-17 10:45 ` Wolfgang Denk
2011-11-17 22:52 ` [U-Boot] [PATCH v2] " Michael Walle
2011-11-19 3:58 ` Mike Frysinger
2011-11-21 4:39 ` Prafulla Wadaskar
2011-12-20 21:55 ` Wolfgang Denk
2011-12-20 21:57 ` Wolfgang Denk
2011-11-08 20:49 ` Mike Frysinger [this message]
2011-11-08 22:45 ` [U-Boot] [PATCH] " Michael Walle
2011-11-09 5:36 ` Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201111081549.50843.vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox