From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ira W. Snyder Date: Thu, 10 Nov 2011 08:54:48 -0800 Subject: [U-Boot] Is CCSRBAR relocation broken on P2020? Message-ID: <20111110165447.GA1801@ovro.caltech.edu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Timur, Kumar, U-Boot List, I'm working on porting U-Boot to the Freescale P2020 COM-Express board. See the ML post from 2011-09-27 titled "[PATCH 0/2] mpc85xx: support for Freescale COM Express P2020". When it was posted, the port was working on the top of tree U-Boot. This included relocation of the CCSRBAR from the power on location of 0xff700000 to 0xffe00000. Today I updated U-Boot to top of tree to address the comments in the initial mailing list posting. Upon attempting to boot the board, I get no console output. I have traced this to commit 6ca88b0958 ("powerpc/85xx: relocate CCSR before creating the initial RAM area"). Indeed, making sure that the code does not run by adding the following to my board config file causes U-Boot to start correctly. Though the CCSRBAR is not relocated, as expected. #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE As an alternative, reverting the commit causes my board to work again. The CCSRBAR is relocated correctly. The P2020DS board is very similar to the board I am using. It performs the same relocation of the CCSRBAR that I want to use as well. Does anyone have a P2020DS that they can test with the current top of tree U-Boot? Does it boot? Can you send the output of "md ffe00000 1"? Thanks, Ira