[U-Boot] [PATCH 2/9] ARM: cerf250: re-add MACH_TYPE_PXA_CERF

[Marek Vasut <marek.vasut@gmail.com>]

> On Sat, Nov 19, 2011 at 3:59 AM, Anatolij Gustschin <agust@denx.de> wrote:
> > MACH_TYPE_PXA_CERF was removed from mach-types.h.
> > Add it to the board config file.
> > 
> > Signed-off-by: Anatolij Gustschin <agust@denx.de>
> 
> I built this and it fixes the failure. I did not test on hardware.
> 
> Acked-by: Simon Glass <sjg@chromium.org>

Good, CCing original maintainer.

Is the device still activelly used or can we drop it?

M

> 
> > ---
> >  board/cerf250/cerf250.c   |    3 ---
> >  include/configs/cerf250.h |    3 +++
> >  2 files changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/board/cerf250/cerf250.c b/board/cerf250/cerf250.c
> > index 043afea..615c288 100644
> > --- a/board/cerf250/cerf250.c
> > +++ b/board/cerf250/cerf250.c
> > @@ -43,9 +43,6 @@ int board_init (void)
> >        dcache_disable();
> >        icache_disable();
> > 
> > -       /* arch number of cerf PXA Board */
> > -       gd->bd->bi_arch_number = MACH_TYPE_PXA_CERF;
> > -
> >        /* adress of boot parameters */
> >        gd->bd->bi_boot_params = 0xa0000100;
> > 
> > diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h
> > index 70427da..dde9e14 100644
> > --- a/include/configs/cerf250.h
> > +++ b/include/configs/cerf250.h
> > @@ -42,6 +42,9 @@
> > 
> >  #undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff */
> > 
> > +#define MACH_TYPE_PXA_CERF     139
> > +#define CONFIG_MACH_TYPE       MACH_TYPE_PXA_CERF
> > +
> >  /* we will never enable dcache, because we have to setup MMU first */
> >  #define CONFIG_SYS_DCACHE_OFF
> > 
> > --
> > 1.7.5.4
> > 
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot