From: Anatolij Gustschin <agust@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-staging (updated)
Date: Mon, 28 Nov 2011 00:00:31 +0100 [thread overview]
Message-ID: <20111128000031.10432bf4@wker> (raw)
In-Reply-To: <20111127202857.316d1dcb@wker>
Hello Wolfgang,
Added a patch from Stefano.
The following changes since commit 99258c34103efad3395c679256a221731d010c4b:
Merge branch 'master' of git://git.denx.de/u-boot-mmc (2011-11-27 16:03:21 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-staging agust at denx.de
Alexander Holler (1):
OMAP3: Use sdelay from arch/arm/cpu/armv7/syslib.c instead of cloning that.
Christian Riesch (3):
davinci_schmoogie: define CONFIG_MACH_TYPE for davinci_schmoogie board
davinci_sonata: define CONFIG_MACH_TYPE for davinci_sonata board
hawkboard: Replace HAWKBOARD_KICK{0, 1}_UNLOCK defines
Igor Grinberg (1):
dataflash: fix parameters order in write_dataflash()
Stefano Babic (1):
MAKEALL: drop obsolete mx31pdk_nand target
Stelian Pop (1):
Fix Stelian's email address
Yan-Pai Chen (1):
arm: a320evb: define mach-type in board config file
CREDITS | 2 +-
MAINTAINERS | 2 +-
MAKEALL | 1 -
arch/arm/cpu/arm920t/at91/at91rm9200_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c | 2 +-
.../cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/led.c | 2 +-
arch/arm/cpu/arm926ejs/at91/reset.c | 2 +-
arch/arm/cpu/arm926ejs/at91/timer.c | 2 +-
arch/arm/cpu/arm926ejs/mb86r0x/timer.c | 2 +-
arch/arm/cpu/armv7/omap3/board.c | 12 +-----------
arch/arm/include/asm/arch-at91/at91_common.h | 2 +-
arch/arm/include/asm/arch-at91/at91cap9.h | 2 +-
arch/arm/include/asm/arch-at91/at91cap9_matrix.h | 2 +-
arch/arm/include/asm/arch-at91/clk.h | 2 +-
arch/arm/include/asm/arch-at91/hardware.h | 2 +-
arch/arm/include/asm/arch-davinci/davinci_misc.h | 3 ---
arch/arm/include/asm/dma-mapping.h | 2 +-
board/afeb9260/Makefile | 2 +-
board/afeb9260/afeb9260.c | 2 +-
board/atmel/at91sam9260ek/Makefile | 2 +-
board/atmel/at91sam9260ek/at91sam9260ek.c | 2 +-
board/atmel/at91sam9260ek/led.c | 2 +-
board/atmel/at91sam9261ek/Makefile | 2 +-
board/atmel/at91sam9261ek/at91sam9261ek.c | 2 +-
board/atmel/at91sam9261ek/led.c | 2 +-
board/atmel/at91sam9263ek/Makefile | 2 +-
board/atmel/at91sam9263ek/at91sam9263ek.c | 2 +-
board/atmel/at91sam9263ek/led.c | 2 +-
board/atmel/at91sam9m10g45ek/Makefile | 2 +-
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 2 +-
board/atmel/at91sam9m10g45ek/led.c | 2 +-
board/atmel/at91sam9rlek/Makefile | 2 +-
board/atmel/at91sam9rlek/at91sam9rlek.c | 2 +-
board/atmel/at91sam9rlek/led.c | 2 +-
board/calao/sbc35_a9g20/Makefile | 2 +-
board/calao/sbc35_a9g20/sbc35_a9g20.c | 2 +-
board/calao/tny_a9260/Makefile | 2 +-
board/calao/tny_a9260/tny_a9260.c | 2 +-
board/davinci/da8xxevm/hawkboard.c | 4 ++--
board/davinci/da8xxevm/hawkboard_nand_spl.c | 4 ++--
board/davinci/schmoogie/schmoogie.c | 3 ---
board/davinci/sonata/sonata.c | 3 ---
board/emk/top9000/top9000.c | 2 +-
board/esd/meesc/Makefile | 2 +-
board/esd/meesc/meesc.c | 2 +-
board/esd/otc570/Makefile | 2 +-
board/esd/otc570/otc570.c | 2 +-
board/eukrea/cpu9260/Makefile | 2 +-
board/eukrea/cpu9260/cpu9260.c | 2 +-
board/faraday/a320evb/a320evb.c | 1 -
board/ronetix/pm9261/Makefile | 2 +-
board/ronetix/pm9261/led.c | 2 +-
board/ronetix/pm9261/pm9261.c | 2 +-
board/ronetix/pm9263/Makefile | 2 +-
board/ronetix/pm9263/led.c | 2 +-
board/ronetix/pm9263/pm9263.c | 2 +-
board/ronetix/pm9g45/Makefile | 2 +-
board/ronetix/pm9g45/pm9g45.c | 2 +-
board/syteco/jadecpu/Makefile | 2 +-
doc/README.scrapyard | 2 +-
drivers/mtd/nand/atmel_nand.c | 2 +-
include/configs/a320evb.h | 6 ++++++
include/configs/at91sam9260ek.h | 2 +-
include/configs/at91sam9261ek.h | 2 +-
include/configs/at91sam9263ek.h | 2 +-
include/configs/at91sam9m10g45ek.h | 2 +-
include/configs/at91sam9rlek.h | 2 +-
include/configs/cpu9260.h | 2 +-
include/configs/davinci_schmoogie.h | 3 +++
include/configs/davinci_sonata.h | 2 ++
include/configs/meesc.h | 2 +-
include/configs/otc570.h | 2 +-
include/configs/pm9261.h | 2 +-
include/configs/pm9263.h | 2 +-
include/configs/pm9g45.h | 2 +-
include/configs/tny_a9260.h | 2 +-
include/dataflash.h | 3 ++-
82 files changed, 88 insertions(+), 97 deletions(-)
Please pull. Thanks!
Anatolij
next prev parent reply other threads:[~2011-11-27 23:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-27 19:28 [U-Boot] Pull request: u-boot-staging Anatolij Gustschin
2011-11-27 23:00 ` Anatolij Gustschin [this message]
2011-11-28 18:57 ` [U-Boot] Pull request: u-boot-staging (updated) Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111128000031.10432bf4@wker \
--to=agust@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox