From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Mon, 28 Nov 2011 18:21:41 +0100 Subject: [U-Boot] [PATCH 1/4] PXA: Drop CERF250 board In-Reply-To: References: <1322247187-5783-1-git-send-email-marek.vasut@gmail.com> Message-ID: <201111281821.41776.marek.vasut@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > Hi Marek, > > On Fri, Nov 25, 2011 at 10:53 AM, Marek Vasut wrote: > > The board is unmaintained and maintainer doesn't respond. > > Should this and the other patches be version 2, or perhaps 3? Probably. > > Also I like Mike's suggested phrasing (something like "The board > doesn't build and maintainer doesn't respond") since if it built OK we > would presumably just leave it. I think they don't build, at least that's how it was when I recently tried. And since I don't see any opposing force, let's drop them. M > > Regards, > Simon > > > Signed-off-by: Marek Vasut > > Cc: Simon Glass > > Cc: Anatolij Gustschin > > --- > > MAINTAINERS | 4 - > > board/cerf250/Makefile | 43 ----- > > board/cerf250/cerf250.c | 85 --------- > > board/cerf250/flash.c | 429 > > --------------------------------------------- boards.cfg > > | 1 - > > doc/README.scrapyard | 1 + > > include/configs/cerf250.h | 229 ------------------------ > > 7 files changed, 1 insertions(+), 791 deletions(-) > > delete mode 100644 board/cerf250/Makefile > > delete mode 100644 board/cerf250/cerf250.c > > delete mode 100644 board/cerf250/flash.c > > delete mode 100644 include/configs/cerf250.h > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 37bbb34..3835154 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -711,10 +711,6 @@ Sergey Kubushyn > > SONATA ARM926EJS > > SCHMOOGIE ARM926EJS > > > > -Prakash Kumar > > - > > - cerf250 xscale/pxa > > - > > Vipin Kumar > > > > spear300 ARM926EJS (spear300 Soc) > > diff --git a/board/cerf250/Makefile b/board/cerf250/Makefile > > deleted file mode 100644 > > index cf4742e..0000000 > > --- a/board/cerf250/Makefile > > +++ /dev/null > > @@ -1,43 +0,0 @@ > > -# > > -# (C) Copyright 2000-2006 > > -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. > > -# > > -# See file CREDITS for list of people who contributed to this > > -# project. > > -# > > -# This program is free software; you can redistribute it and/or > > -# modify it under the terms of the GNU General Public License as > > -# published by the Free Software Foundation; either version 2 of > > -# the License, or (at your option) any later version. > > -# > > -# This program is distributed in the hope that it will be useful, > > -# but WITHOUT ANY WARRANTY; without even the implied warranty of > > -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > -# GNU General Public License for more details. > > -# > > -# You should have received a copy of the GNU General Public License > > -# along with this program; if not, write to the Free Software > > -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, > > -# MA 02111-1307 USA > > -# > > - > > -include $(TOPDIR)/config.mk > > - > > -LIB = $(obj)lib$(BOARD).o > > - > > -COBJS := cerf250.o flash.o > > - > > -SRCS := $(COBJS:.o=.c) > > -OBJS := $(addprefix $(obj),$(COBJS)) > > - > > -$(LIB): $(obj).depend $(OBJS) > > - $(call cmd_link_o_target, $(OBJS)) > > - > > -######################################################################## > > # - > > -# defines $(obj).depend target > > -include $(SRCTREE)/rules.mk > > - > > -sinclude $(obj).depend > > - > > -######################################################################## > > # diff --git a/board/cerf250/cerf250.c b/board/cerf250/cerf250.c > > deleted file mode 100644 > > index 043afea..0000000 > > --- a/board/cerf250/cerf250.c > > +++ /dev/null > > @@ -1,85 +0,0 @@ > > -/* > > - * (C) Copyright 2002 > > - * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net > > - * > > - * (C) Copyright 2002 > > - * Sysgo Real-Time Solutions, GmbH > > - * Marius Groeger > > - * > > - * See file CREDITS for list of people who contributed to this > > - * project. > > - * > > - * This program is free software; you can redistribute it and/or > > - * modify it under the terms of the GNU General Public License as > > - * published by the Free Software Foundation; either version 2 of > > - * the License, or (at your option) any later version. > > - * > > - * This program is distributed in the hope that it will be useful, > > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > - * GNU General Public License for more details. > > - * > > - * You should have received a copy of the GNU General Public License > > - * along with this program; if not, write to the Free Software > > - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > > - * MA 02111-1307 USA > > - */ > > - > > -#include > > -#include > > - > > -DECLARE_GLOBAL_DATA_PTR; > > - > > -/* > > ------------------------------------------------------------------------ > > - */ - > > - > > -/* > > - * Miscelaneous platform dependent initialisations > > - */ > > - > > -int board_init (void) > > -{ > > - /* We have RAM, disable cache */ > > - dcache_disable(); > > - icache_disable(); > > - > > - /* arch number of cerf PXA Board */ > > - gd->bd->bi_arch_number = MACH_TYPE_PXA_CERF; > > - > > - /* adress of boot parameters */ > > - gd->bd->bi_boot_params = 0xa0000100; > > - > > - return 0; > > -} > > - > > -int board_late_init(void) > > -{ > > - setenv("stdout", "serial"); > > - setenv("stderr", "serial"); > > - return 0; > > -} > > - > > -extern void pxa_dram_init(void); > > -int dram_init(void) > > -{ > > - pxa_dram_init(); > > - gd->ram_size = PHYS_SDRAM_1_SIZE; > > - return 0; > > -} > > - > > -void dram_init_banksize(void) > > -{ > > - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; > > - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; > > -} > > - > > -#ifdef CONFIG_CMD_NET > > -int board_eth_init(bd_t *bis) > > -{ > > - int rc = 0; > > -#ifdef CONFIG_SMC91111 > > - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); > > -#endif > > - return rc; > > -} > > -#endif > > diff --git a/board/cerf250/flash.c b/board/cerf250/flash.c > > deleted file mode 100644 > > index e1e7807..0000000 > > --- a/board/cerf250/flash.c > > +++ /dev/null > > @@ -1,429 +0,0 @@ > > -/* > > - * (C) Copyright 2001 > > - * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net > > - * > > - * (C) Copyright 2001 > > - * Wolfgang Denk, DENX Software Engineering, wd at denx.de. > > - * > > - * See file CREDITS for list of people who contributed to this > > - * project. > > - * > > - * This program is free software; you can redistribute it and/or > > - * modify it under the terms of the GNU General Public License as > > - * published by the Free Software Foundation; either version 2 of > > - * the License, or (at your option) any later version. > > - * > > - * This program is distributed in the hope that it will be useful, > > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > - * GNU General Public License for more details. > > - * > > - * You should have received a copy of the GNU General Public License > > - * along with this program; if not, write to the Free Software > > - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > > - * MA 02111-1307 USA > > - */ > > - > > -#include > > -#include > > - > > - > > -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH > > chips */ - > > -/* Board support for 1 or 2 flash devices */ > > -#define FLASH_PORT_WIDTH32 > > -#undef FLASH_PORT_WIDTH16 > > - > > -#ifdef FLASH_PORT_WIDTH16 > > -#define FLASH_PORT_WIDTH ushort > > -#define FLASH_PORT_WIDTHV vu_short > > -#define SWAP(x) __swab16(x) > > -#else > > -#define FLASH_PORT_WIDTH ulong > > -#define FLASH_PORT_WIDTHV vu_long > > -#define SWAP(x) __swab32(x) > > -#endif > > - > > -#define FPW FLASH_PORT_WIDTH > > -#define FPWV FLASH_PORT_WIDTHV > > - > > -#define mb() __asm__ __volatile__ ("" : : : "memory") > > - > > -/*---------------------------------------------------------------------- > > - - * Functions > > - */ > > -static ulong flash_get_size (FPW *addr, flash_info_t *info); > > -static int write_data (flash_info_t *info, ulong dest, FPW data); > > -static void flash_get_offsets (ulong base, flash_info_t *info); > > -void inline spin_wheel (void); > > - > > -/*---------------------------------------------------------------------- > > - - */ > > - > > -unsigned long flash_init (void) > > -{ > > - int i; > > - ulong size = 0; > > - > > - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { > > - switch (i) { > > - case 0: > > - flash_get_size ((FPW *) PHYS_FLASH_1, > > &flash_info[i]); - flash_get_offsets > > (PHYS_FLASH_1, &flash_info[i]); - break; > > - case 1: > > - flash_get_size ((FPW *) PHYS_FLASH_2, > > &flash_info[i]); - flash_get_offsets > > (PHYS_FLASH_2, &flash_info[i]); - break; > > - default: > > - panic ("configured too many flash banks!\n"); > > - break; > > - } > > - size += flash_info[i].size; > > - } > > - > > - /* Protect monitor and environment sectors > > - */ > > - flash_protect ( FLAG_PROTECT_SET, > > - CONFIG_SYS_FLASH_BASE, > > - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, > > - &flash_info[0] ); > > - > > - flash_protect ( FLAG_PROTECT_SET, > > - CONFIG_ENV_ADDR, > > - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, > > &flash_info[0] ); - > > - return size; > > -} > > - > > -/*---------------------------------------------------------------------- > > - - */ > > -static void flash_get_offsets (ulong base, flash_info_t *info) > > -{ > > - int i; > > - > > - if (info->flash_id == FLASH_UNKNOWN) { > > - return; > > - } > > - > > - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { > > - for (i = 0; i < info->sector_count; i++) { > > - info->start[i] = base + (i * > > PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; > > - } > > - } > > -} > > - > > -/*---------------------------------------------------------------------- > > - - */ > > -void flash_print_info (flash_info_t *info) > > -{ > > - int i; > > - > > - if (info->flash_id == FLASH_UNKNOWN) { > > - printf ("missing or unknown FLASH type\n"); > > - return; > > - } > > - > > - switch (info->flash_id & FLASH_VENDMASK) { > > - case FLASH_MAN_INTEL: > > - printf ("INTEL "); > > - break; > > - default: > > - printf ("Unknown Vendor "); > > - break; > > - } > > - > > - switch (info->flash_id & FLASH_TYPEMASK) { > > - case FLASH_28F128J3A: > > - printf ("28F128J3A\n"); > > - break; > > - default: > > - printf ("Unknown Chip Type\n"); > > - break; > > - } > > - > > - printf (" Size: %ld MB in %d Sectors\n", > > - info->size >> 20, info->sector_count); > > - > > - printf (" Sector Start Addresses:"); > > - for (i = 0; i < info->sector_count; ++i) { > > - if ((i % 5) == 0) > > - printf ("\n "); > > - printf (" %08lX%s", > > - info->start[i], > > - info->protect[i] ? " (RO)" : " "); > > - } > > - printf ("\n"); > > - return; > > -} > > - > > -/* > > - * The following code cannot be run from FLASH! > > - */ > > -static ulong flash_get_size (FPW *addr, flash_info_t *info) > > -{ > > - volatile FPW value; > > - > > - /* Write auto select command: read Manufacturer ID */ > > - addr[0x5555] = (FPW) 0x00AA00AA; > > - addr[0x2AAA] = (FPW) 0x00550055; > > - addr[0x5555] = (FPW) 0x00900090; > > - > > - mb (); > > - value = addr[0]; > > - > > - switch (value) { > > - > > - case (FPW) INTEL_MANUFACT: > > - info->flash_id = FLASH_MAN_INTEL; > > - break; > > - > > - default: > > - info->flash_id = FLASH_UNKNOWN; > > - info->sector_count = 0; > > - info->size = 0; > > - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ > > - return (0); /* no or unknown flash > > */ - } > > - > > - mb (); > > - value = addr[1]; /* device ID */ > > - > > - switch (value) { > > - > > - case (FPW) INTEL_ID_28F128J3A: > > - info->flash_id += FLASH_28F128J3A; > > - info->sector_count = 128; > > - info->size = 0x02000000; > > - break; /* => 16 MB */ > > - > > - default: > > - info->flash_id = FLASH_UNKNOWN; > > - break; > > - } > > - > > - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { > > - printf ("** ERROR: sector count %d > max (%d) **\n", > > - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); > > - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; > > - } > > - > > - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ > > - > > - return (info->size); > > -} > > - > > - > > -/*---------------------------------------------------------------------- > > - - */ > > - > > -int flash_erase (flash_info_t *info, int s_first, int s_last) > > -{ > > - int flag, prot, sect; > > - ulong type, start; > > - int rcode = 0; > > - > > - if ((s_first < 0) || (s_first > s_last)) { > > - if (info->flash_id == FLASH_UNKNOWN) { > > - printf ("- missing\n"); > > - } else { > > - printf ("- no sectors to erase\n"); > > - } > > - return 1; > > - } > > - > > - type = (info->flash_id & FLASH_VENDMASK); > > - if ((type != FLASH_MAN_INTEL)) { > > - printf ("Can't erase unknown flash type %08lx - > > aborted\n", - info->flash_id); > > - return 1; > > - } > > - > > - prot = 0; > > - for (sect = s_first; sect <= s_last; ++sect) { > > - if (info->protect[sect]) { > > - prot++; > > - } > > - } > > - > > - if (prot) { > > - printf ("- Warning: %d protected sectors will not be > > erased!\n", - prot); > > - } else { > > - printf ("\n"); > > - } > > - > > - /* Disable interrupts which might cause a timeout here */ > > - flag = disable_interrupts (); > > - > > - /* Start erase on unprotected sectors */ > > - for (sect = s_first; sect <= s_last; sect++) { > > - if (info->protect[sect] == 0) { /* not protected */ > > - FPWV *addr = (FPWV *) (info->start[sect]); > > - FPW status; > > - > > - printf ("Erasing sector %2d ... ", sect); > > - > > - /* arm simple, non interrupt dependent timer */ > > - start = get_timer(0); > > - > > - *addr = (FPW) 0x00500050; /* clear status > > register */ - *addr = (FPW) 0x00200020; /* > > erase setup */ - *addr = (FPW) 0x00D000D0; > > /* erase confirm */ - > > - while (((status = *addr) & (FPW) 0x00800080) != > > (FPW) 0x00800080) { - if (get_timer(start) > > > CONFIG_SYS_FLASH_ERASE_TOUT) { - > > printf ("Timeout\n"); > > - *addr = (FPW) 0x00B000B0; > > /* suspend erase */ - *addr = > > (FPW) 0x00FF00FF; /* reset to read mode */ - > > rcode = 1; > > - break; > > - } > > - } > > - > > - *addr = 0x00500050; /* clear status register > > cmd. */ - *addr = 0x00FF00FF; /* resest to > > read mode */ - > > - printf (" done\n"); > > - } > > - } > > - return rcode; > > -} > > - > > -/*---------------------------------------------------------------------- > > - - * Copy memory to flash, returns: > > - * 0 - OK > > - * 1 - write timeout > > - * 2 - Flash not erased > > - * 4 - Flash not identified > > - */ > > - > > -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) > > -{ > > - ulong cp, wp; > > - FPW data; > > - int count, i, l, rc, port_width; > > - > > - if (info->flash_id == FLASH_UNKNOWN) { > > - return 4; > > - } > > -/* get lower word aligned address */ > > -#ifdef FLASH_PORT_WIDTH16 > > - wp = (addr & ~1); > > - port_width = 2; > > -#else > > - wp = (addr & ~3); > > - port_width = 4; > > -#endif > > - > > - /* > > - * handle unaligned start bytes > > - */ > > - if ((l = addr - wp) != 0) { > > - data = 0; > > - for (i = 0, cp = wp; i < l; ++i, ++cp) { > > - data = (data << 8) | (*(uchar *) cp); > > - } > > - for (; i < port_width && cnt > 0; ++i) { > > - data = (data << 8) | *src++; > > - --cnt; > > - ++cp; > > - } > > - for (; cnt == 0 && i < port_width; ++i, ++cp) { > > - data = (data << 8) | (*(uchar *) cp); > > - } > > - > > - if ((rc = write_data (info, wp, SWAP (data))) != 0) { > > - return (rc); > > - } > > - wp += port_width; > > - } > > - > > - /* > > - * handle word aligned part > > - */ > > - count = 0; > > - while (cnt >= port_width) { > > - data = 0; > > - for (i = 0; i < port_width; ++i) { > > - data = (data << 8) | *src++; > > - } > > - if ((rc = write_data (info, wp, SWAP (data))) != 0) { > > - return (rc); > > - } > > - wp += port_width; > > - cnt -= port_width; > > - if (count++ > 0x800) { > > - spin_wheel (); > > - count = 0; > > - } > > - } > > - > > - if (cnt == 0) { > > - return (0); > > - } > > - > > - /* > > - * handle unaligned tail bytes > > - */ > > - data = 0; > > - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { > > - data = (data << 8) | *src++; > > - --cnt; > > - } > > - for (; i < port_width; ++i, ++cp) { > > - data = (data << 8) | (*(uchar *) cp); > > - } > > - > > - return (write_data (info, wp, SWAP (data))); > > -} > > - > > -/*---------------------------------------------------------------------- > > - - * Write a word or halfword to Flash, returns: > > - * 0 - OK > > - * 1 - write timeout > > - * 2 - Flash not erased > > - */ > > -static int write_data (flash_info_t *info, ulong dest, FPW data) > > -{ > > - FPWV *addr = (FPWV *) dest; > > - ulong status; > > - int flag; > > - ulong start; > > - > > - /* Check if Flash is (sufficiently) erased */ > > - if ((*addr & data) != data) { > > - printf ("not erased at %08lx (%lx)\n", (ulong) addr, > > *addr); - return (2); > > - } > > - /* Disable interrupts which might cause a timeout here */ > > - flag = disable_interrupts (); > > - > > - *addr = (FPW) 0x00400040; /* write setup */ > > - *addr = data; > > - > > - /* arm simple, non interrupt dependent timer */ > > - start = get_timer(0); > > - > > - /* wait while polling the status register */ > > - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) > > { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { > > - *addr = (FPW) 0x00FF00FF; /* restore read > > mode */ - return (1); > > - } > > - } > > - > > - *addr = (FPW) 0x00FF00FF; /* restore read mode */ > > - > > - return (0); > > -} > > - > > -void inline spin_wheel (void) > > -{ > > - static int p = 0; > > - static char w[] = "\\/-"; > > - > > - printf ("\010%c", w[p]); > > - (++p == 3) ? (p = 0) : 0; > > -} > > diff --git a/boards.cfg b/boards.cfg > > index 7c63449..d65ca12 100644 > > --- a/boards.cfg > > +++ b/boards.cfg > > @@ -216,7 +216,6 @@ actux3 arm ixp > > actux4 arm ixp > > dvlhost arm ixp > > balloon3 arm pxa > > -cerf250 arm pxa > > colibri_pxa270 arm pxa > > cradle arm pxa > > lubbock arm pxa > > diff --git a/doc/README.scrapyard b/doc/README.scrapyard > > index cb5e4bc..232cd68 100644 > > --- a/doc/README.scrapyard > > +++ b/doc/README.scrapyard > > @@ -11,6 +11,7 @@ easily if here is something they might want to dig > > for... > > > > Board Arch CPU removed Commit last known > > maintainer/contact > > ======================================================================== > > ===== +cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar > > mpq101 powerpc mpc85xx - 2011-10-23 Alex > > Dubov ixdpg425 arm ixp 0ca8eb7 2011-09-22 > > Stefan Roese ixdp425 arm ixp 0ca8eb7 2011-09-22 > > Kyle Harris diff --git > > a/include/configs/cerf250.h b/include/configs/cerf250.h deleted file > > mode 100644 > > index 70427da..0000000 > > --- a/include/configs/cerf250.h > > +++ /dev/null > > @@ -1,229 +0,0 @@ > > -/* > > - * (C) Copyright 2002 > > - * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net > > - * > > - * (C) Copyright 2002 > > - * Sysgo Real-Time Solutions, GmbH > > - * Marius Groeger > > - * > > - * Configuation settings for the CERF250 board. > > - * > > - * See file CREDITS for list of people who contributed to this > > - * project. > > - * > > - * This program is free software; you can redistribute it and/or > > - * modify it under the terms of the GNU General Public License as > > - * published by the Free Software Foundation; either version 2 of > > - * the License, or (at your option) any later version. > > - * > > - * This program is distributed in the hope that it will be useful, > > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > - * GNU General Public License for more details. > > - * > > - * You should have received a copy of the GNU General Public License > > - * along with this program; if not, write to the Free Software > > - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > > - * MA 02111-1307 USA > > - */ > > - > > -#ifndef __CONFIG_H > > -#define __CONFIG_H > > - > > -/* > > - * High Level Configuration Options > > - * (easy to change) > > - */ > > -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ > > -#define CONFIG_CERF250 1 /* on Cerf PXA Board */ > > -#define CONFIG_BOARD_LATE_INIT > > -#define CONFIG_BAUDRATE 38400 > > -#define CONFIG_SYS_TEXT_BASE 0x0 > > - > > -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ > > - > > -/* we will never enable dcache, because we have to setup MMU first */ > > -#define CONFIG_SYS_DCACHE_OFF > > - > > -/* > > - * Size of malloc() pool > > - */ > > -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) > > - > > -/* > > - * Hardware drivers > > - */ > > -#define CONFIG_SMC91111 > > -#define CONFIG_SMC91111_BASE 0x04000300 > > -#define CONFIG_SMC_USE_32_BIT > > - > > -/* > > - * select serial console configuration > > - */ > > -#define CONFIG_PXA_SERIAL > > -#define CONFIG_FFUART 1 /* we use FFUART on CERF PXA */ > > - > > -/* allow to overwrite serial and ethaddr */ > > -#define CONFIG_ENV_OVERWRITE > > - > > -/* > > - * BOOTP options > > - */ > > -#define CONFIG_BOOTP_BOOTFILESIZE > > -#define CONFIG_BOOTP_BOOTPATH > > -#define CONFIG_BOOTP_GATEWAY > > -#define CONFIG_BOOTP_HOSTNAME > > - > > - > > -/* > > - * Command line configuration. > > - */ > > -#include > > - > > - > > -#define CONFIG_BOOTDELAY 3 > > -#define CONFIG_ETHADDR 00:D0:CA:F1:3C:D2 > > -#define CONFIG_NETMASK 255.255.255.0 > > -#define CONFIG_IPADDR 192.168.0.5 > > -#define CONFIG_SERVERIP 192.168.0.2 > > -#define CONFIG_BOOTCOMMAND "bootm 0xC0000" > > -#define CONFIG_BOOTARGS "root=/dev/mtdblock3 > > rootfstype=jffs2 console=ttyS0,38400" -#define CONFIG_CMDLINE_TAG > > - > > -#if defined(CONFIG_CMD_KGDB) > > -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port > > */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port > > to use */ -#endif > > - > > -/* > > - * Miscellaneous configurable options > > - */ > > -#define CONFIG_SYS_HUSH_PARSER 1 > > -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " > > - > > -#define CONFIG_SYS_LONGHELP /* undef > > to save memory */ -#ifdef CONFIG_SYS_HUSH_PARSER > > -#define CONFIG_SYS_PROMPT "uboot$ " /* > > Monitor Command Prompt */ -#else > > -#define CONFIG_SYS_PROMPT "=> " /* > > Monitor Command Prompt */ -#endif > > -#define CONFIG_SYS_CBSIZE 256 > > /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE > > (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - > > /* > > Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 > > /* max number of command args */ -#define > > CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument > > Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 > > - > > -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works > > on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 > > ... 8 MB in DRAM */ - > > -#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load > > address */ - > > -#define CONFIG_SYS_HZ 1000 > > -#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock > > to 400/200/100 MHz */ - > > -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, > > 115200 } - > > - > > -/* > > - * Stack sizes > > - * > > - * The stack sizes are set up in start.S using the settings below > > - */ > > -#define CONFIG_STACKSIZE (128*1024) /* regular stack > > */ -#ifdef CONFIG_USE_IRQ > > -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ > > -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ > > -#endif > > - > > -/* > > - * Physical Memory Map > > - */ > > -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank > > of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* > > SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 > > /* 64 MB */ - > > -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 > > */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank > > #2 */ -#define PHYS_FLASH_SIZE 0x02000000 /* > > 32 MB */ -#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 > > MB Banks */ -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* > > 256 KB sectors (x2) */ - > > -#define CONFIG_SYS_DRAM_BASE 0xa0000000 > > -#define CONFIG_SYS_DRAM_SIZE 0x04000000 > > - > > -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 > > - > > -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 > > -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE > > + PHYS_SDRAM_1) - > > -/* > > - * GPIO settings > > - */ > > - > > - > > -#define CONFIG_SYS_GPSR0_VAL 0x00408030 > > -#define CONFIG_SYS_GPSR1_VAL 0x00BFA882 > > -#define CONFIG_SYS_GPSR2_VAL 0x0001C000 > > -#define CONFIG_SYS_GPCR0_VAL 0xC0031100 > > -#define CONFIG_SYS_GPCR1_VAL 0xFC400300 > > -#define CONFIG_SYS_GPCR2_VAL 0x00003FFF > > -#define CONFIG_SYS_GPDR0_VAL 0xC0439330 > > -#define CONFIG_SYS_GPDR1_VAL 0xFCFFAB82 > > -#define CONFIG_SYS_GPDR2_VAL 0x0001FFFF > > -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 > > -#define CONFIG_SYS_GAFR0_U_VAL 0xA5000010 > > -#define CONFIG_SYS_GAFR1_L_VAL 0x60008018 > > -#define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA > > -#define CONFIG_SYS_GAFR2_L_VAL 0xAAA0000A > > -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 > > - > > -#define CONFIG_SYS_PSSR_VAL 0x20 > > - > > -#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 > > -#define CONFIG_SYS_CKEN 0x0 > > - > > -/* > > - * Memory settings > > - */ > > -#define CONFIG_SYS_MSC0_VAL 0x12447FF0 > > -#define CONFIG_SYS_MSC1_VAL 0x12BC5554 > > -#define CONFIG_SYS_MSC2_VAL 0x7FF97FF1 > > -#define CONFIG_SYS_MDCNFG_VAL 0x00001AC9 > > -#define CONFIG_SYS_MDREFR_VAL 0x03CDC017 > > -#define CONFIG_SYS_MDMRS_VAL 0x00000000 > > -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 > > -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 > > - > > -/* > > - * PCMCIA and CF Interfaces > > - */ > > -#define CONFIG_SYS_MECR_VAL 0x00000000 > > -#define CONFIG_SYS_MCMEM0_VAL 0x00010504 > > -#define CONFIG_SYS_MCMEM1_VAL 0x00010504 > > -#define CONFIG_SYS_MCATT0_VAL 0x00010504 > > -#define CONFIG_SYS_MCATT1_VAL 0x00010504 > > -#define CONFIG_SYS_MCIO0_VAL 0x00004715 > > -#define CONFIG_SYS_MCIO1_VAL 0x00004715 > > - > > -#define _LED 0x08000010 /*check this */ > > -#define LED_BLANK 0x08000040 > > -#define LED_GPIO 0x10 > > - > > -/* > > - * FLASH and environment organization > > - */ > > -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory > > banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* > > max number of sectors on one chip */ - > > -/* timeout values are in ticks */ > > -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for > > Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT > > (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - > > -#define CONFIG_SYS_MONITOR_LEN 0x40000 /* 256 KiB */ > > -#define CONFIG_ENV_IS_IN_FLASH 1 > > -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + > > CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x40000 > > /* Total Size of Environment Sector */ - > > - > > -#endif /* __CONFIG_H */ > > -- > > 1.7.7.1