From mboxrd@z Thu Jan  1 00:00:00 1970
From: Anatolij Gustschin <agust@denx.de>
Date: Sat, 3 Dec 2011 19:40:40 +0100
Subject: [U-Boot] TQM860L_config: u-boot.lds:76 cannot move location
 counter backwards
In-Reply-To: <alpine.DEB.2.02.1112031243520.1549@oneiric>
References: <alpine.DEB.2.02.1112022151510.21125@oneiric>
	<201112030612.20098.marek.vasut@gmail.com>
	<alpine.DEB.2.02.1112030255250.24308@oneiric>
	<20111203081602.C279318EADD3@gemini.denx.de>
	<alpine.DEB.2.02.1112031243520.1549@oneiric>
Message-ID: <20111203194040.2ad75425@wker>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Robert,

On Sat, 3 Dec 2011 12:47:47 -0500 (EST)
"Robert P. J. Day" <rpjday@crashcourse.ca> wrote:
...
> > Top of tree:
> > -> git describe
> > v2011.09-1259-g7708d8b
> > -> eldk-switch -r 4.2 ppc_8xx
> > Setup for ppc_8xx (using ELDK 4.2)
> 
>   i'm sure someone will yell at me for this question as well, but
> where does one find "eldk-switch"?  i have a fully updated git clone
> of uboot and there is no such script (which is what i assume i'm
> looking for).

eldk-switch is internally used script, it is not distributed with
U-Boot since its purpose is to configure environment in preparation
for building using desired ELDK version.

You don't need this script. You can setup environment i. e. by
running

$ export ARCH=powerpc
$ export CROSS_COMPILE=ppc_8xx-
$ export PATH=<your-eldk-root-dir>/usr/bin:$PATH

To check if the environment is set correctly you can try to run
installed cross gcc, i.e. run:

${CROSS_COMPILE}gcc -v

More info is available in ELDK documentation, i. e. [1]

HTH,
Anatolij

[1] http://www.denx.de/wiki/view/DULG/ELDKUsage