From: Anatolij Gustschin <agust@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] omap: TWL4030 Bump VMMC1 interface voltage from 3V to 3.15V
Date: Tue, 6 Dec 2011 21:16:47 +0100 [thread overview]
Message-ID: <20111206211647.728cd426@wker> (raw)
In-Reply-To: <1317228436-4606-1-git-send-email-ash@gumstix.com>
On Wed, 28 Sep 2011 09:47:16 -0700
Ash Charles <ash@gumstix.com> wrote:
> MMC interfaces are specified to be 3.3V compatible with an operating
> voltage range of 3.1V to 3.5V for SD cards. This change affects
> hardware using TWL4030 (TPS6595x) PMICs and should improve the
> reliability when communicating with marginally-spec'd MMC devices.
> 3.15V is the highest possible level for this chip. This patch
> has been tested on a Gumstix Overo board.
>
> Signed-off-by: Ash Charles <ash@gumstix.com>
> ---
> drivers/power/twl4030.c | 4 ++--
> include/twl4030.h | 1 +
> 2 files changed, 3 insertions(+), 2 deletions(-)
Applied to u-boot-staging/agust at denx.de. Thanks!
Anatolij
prev parent reply other threads:[~2011-12-06 20:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-28 16:47 [U-Boot] [PATCH] omap: TWL4030 Bump VMMC1 interface voltage from 3V to 3.15V Ash Charles
2011-09-30 19:00 ` Steve Sakoman
2011-12-06 20:16 ` Anatolij Gustschin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111206211647.728cd426@wker \
--to=agust@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox