[U-Boot] [PATCH v7] Add generic ULPI layer

[Marek Vasut <marek.vasut@gmail.com>]

> On 12/07/11 14:59, Igor Grinberg wrote:
> > Hi Marek,
> > 
> > On 12/07/11 01:49, Marek Vasut wrote:
> >>> Although it is a single patch, I felt that a cover letter will
> >>> definetly not hurt here, also the patch version history is so big, so
> >>> I decided to move it here.
> >>> 
> >>> The ULPI (UTMI Low Pin (count) Interface) PHYs are widely used on
> >>> variety of boards. This requires a generic architecture independant
> >>> implementation which can be reused and will eliminate the need for
> >>> direct write of arbitrary values to the ULPI transciever.
> >>> Although, the generic implementation can be reused on any architecture,
> >>> the access to ULPI PHY must be done in a platform specific way.
> >>> The platform specific way is in majority of case called a viewport.
> >>> Also, the ULPI specification defines a hybrid aproach for managing the
> >>> ULPI PHY. That is, the PHY must be managed through both the PHY
> >>> registers and control lines.
> >>> 
> >>> The proposed patch provides a partial implementation of the ULPI
> >>> specification, which should be enough for boot loader use cases,
> >>> and a viewport implementation for Chipidea/ARC based controllers,
> >>> which, AFAIK, are used on imx and tegra SoCs.
> >>> 
> >>> It is based on the Wolfgang's master branch (4 Dec 2012),
> >>> compile tested and checkpatch clean.
> >>> 
> >>> What is still missing, IMO:
> >>> 	- documentation for the CONFIG_* macros (I can add it in a separate
> >> 
> >> patch)
> >> 
> >>> 	- a way to make most of the initialization in one ulpi_init() call
> >>> 	- viewport extension to be able to implement resume,
> >>> 	
> >>> 	  reset and disabling the serial mode
> >>> 
> >>> The change log:
> >>> 
> >>> Changes for v2:
> >>> 	- make code EHCI-independent
> >>> 	- use udelay() in waiting loop
> >>> 	- mark static functions as static
> >>> 	- naming changes
> >>> 
> >>> Changes for v3:
> >>> 	- merge with patch ulpi: add generic ULPI support header file
> >>> 	- rewrite ULPI interface in more functionality-oriented way
> >>> 
> >>> Changes for v4:
> >>> 	- add error-checking
> >>> 	- add waiting for completion into ulpi_reset() function
> >>> 
> >>> Changes for v5:
> >>> 	- CodingStyle changes
> >>> 	- add comments
> >>> 	- simplify implemenation of the ULPI interface functions
> >>> 
> >>> Changes for v6:
> >>> 	- cleanup function ulpi_drive_vbus()
> >>> 
> >>> Changes for v7:
> >>> 	- ulpi-viewport.c:
> >>> 		- reorder bit definitions
> >>> 		- split ulpi_request() to two functions
> >>> 		- reuse ulpi_wakeup() from ulpi_request()
> >>> 		
> >>> 		  to remove duplicated calls from ulpi_{read|write}()
> >>> 		
> >>> 		- inline ulpi_*_mask as it is simple and used only once
> >>> 	
> >>> 	- ulpi.c:
> >>> 		- move several defines into c file
> >>> 		- rework all the functions to propagate error values
> >>> 		- move function description comments into ulpi.h
> >>> 		
> >>> 		  along with declarations
> >>> 		
> >>> 		- check arguments validity (as suggested by Simon)
> >>> 		- fix cases when using the *_set register,
> >>> 		
> >>> 		  bits cannot be cleared
> >>> 		
> >>> 		- shorten several arguments names (e.g. ulpi_set_vbus())
> >>> 		- add ability to disable VBUS
> >>> 		- clean up ulpi_set_pd()
> >>> 		- add ability to enter the serial mode
> >>> 		- add verbosity in error cases
> >>> 		- remove ulpi_resume() as it were wrong and
> >>> 		
> >>> 		  must be implemented in a viewport specific way
> >>> 		
> >>> 		- rework ulpi_reset() as it must be implemented in a
> >>> 		
> >>> 		  viewport specific way, but provide kind of generic
> >>> 		  implementation which should work in most of the cases
> >>> 	
> >>> 	- ulpi.h:
> >>> 		- add default timeout value
> >>> 		- remove unused defines
> >>> 		- move several defines inside c files
> >>> 		- add description for each function
> >>> 		- move the API declaration to the top of the header file
> >>> 
> >>> Jana Rapava (1):
> >>>   USB: Add generic ULPI layer and a viewport
> >>>  
> >>>  Makefile                         |    1 +
> >>>  drivers/usb/ulpi/Makefile        |   44 ++++++
> >>>  drivers/usb/ulpi/ulpi-viewport.c |  118 +++++++++++++++
> >>>  drivers/usb/ulpi/ulpi.c          |  227 +++++++++++++++++++++++++++++
> >>>  include/usb/ulpi.h               |  298
> >>> 
> >>> ++++++++++++++++++++++++++++++++++++++ 5 files changed, 688
> >>> insertions(+), 0 deletions(-)
> >>> 
> >>>  create mode 100644 drivers/usb/ulpi/Makefile
> >>>  create mode 100644 drivers/usb/ulpi/ulpi-viewport.c
> >>>  create mode 100644 drivers/usb/ulpi/ulpi.c
> >>>  create mode 100644 include/usb/ulpi.h
> >> 
> >> Igor, please add Cc annotations to this patch too.
> > 
> > Well, I indeed forgot this, but I've send a forward of this email
> > to everybody supposed to be in Cc. Adding Cc once again...
> 
> That's interesting...
> I've added much more people to Cc, than those listed currently...
> It looks like the bounce from the list "eats" the Cc partially...

Exactly, I noticed this earlier in some other emails too. Detlev, can you please 
verify?

M