* [U-Boot] [PATCH] pm9263: init serial console before relocation
@ 2011-09-13 12:21 Asen Chavdarov Dimov
2011-12-06 22:04 ` Anatolij Gustschin
0 siblings, 1 reply; 4+ messages in thread
From: Asen Chavdarov Dimov @ 2011-09-13 12:21 UTC (permalink / raw)
To: u-boot
The early messages can be seen on the debug console.
Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
---
board/ronetix/pm9263/pm9263.c | 19 +++++++++++--------
include/configs/pm9263.h | 1 +
2 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index cfc9847..e102a11 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -337,25 +337,28 @@ void lcd_show_board_info(void)
#endif /* CONFIG_LCD */
-int board_init(void)
+int board_early_init_f(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- /* Enable Ctrlc */
- console_init_f();
-
- writel((1 << ATMEL_ID_PIOA) |
- (1 << ATMEL_ID_PIOCDE) |
- (1 << ATMEL_ID_PIOB),
+ /* Enable clocks for all PIOs */
+ writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
+ (1 << ATMEL_ID_PIOCDE),
&pmc->pcer);
+ at91_seriald_hw_init();
+
+ return 0;
+}
+
+int board_init(void)
+{
/* arch number of AT91SAM9263EK-Board */
gd->bd->bi_arch_number = MACH_TYPE_PM9263;
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- at91_seriald_hw_init();
#ifdef CONFIG_CMD_NAND
pm9263_nand_hw_init();
#endif
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index f1bd389..9d94bbd 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -169,6 +169,7 @@
#undef CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_USER_LOWLEVEL_INIT 1
+#define CONFIG_BOARD_EARLY_INIT_F
/*
* Hardware drivers
--
1.7.4.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] pm9263: init serial console before relocation
2011-09-13 12:21 [U-Boot] [PATCH] pm9263: init serial console before relocation Asen Chavdarov Dimov
@ 2011-12-06 22:04 ` Anatolij Gustschin
2011-12-09 20:56 ` [U-Boot] [PATCH v2] " Asen Chavdarov Dimov
0 siblings, 1 reply; 4+ messages in thread
From: Anatolij Gustschin @ 2011-12-06 22:04 UTC (permalink / raw)
To: u-boot
Hi,
On Tue, 13 Sep 2011 15:21:00 +0300
Asen Chavdarov Dimov <dimov@ronetix.at> wrote:
> The early messages can be seen on the debug console.
>
> Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
> ---
> board/ronetix/pm9263/pm9263.c | 19 +++++++++++--------
> include/configs/pm9263.h | 1 +
> 2 files changed, 12 insertions(+), 8 deletions(-)
This patch doesn't apply. Please rebase and resubmit. Thanks!
Anatolij
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH v2] pm9263: init serial console before relocation
2011-12-06 22:04 ` Anatolij Gustschin
@ 2011-12-09 20:56 ` Asen Chavdarov Dimov
2011-12-12 9:44 ` Anatolij Gustschin
0 siblings, 1 reply; 4+ messages in thread
From: Asen Chavdarov Dimov @ 2011-12-09 20:56 UTC (permalink / raw)
To: u-boot
The early messages can be seen on the debug console.
Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
---
Change since v1
- rebased over master
board/ronetix/pm9263/pm9263.c | 22 ++++++++++++++--------
include/configs/pm9263.h | 1 +
2 files changed, 15 insertions(+), 8 deletions(-)
diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index 59cca87..1266114 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -336,22 +336,28 @@ void lcd_show_board_info(void)
#endif /* CONFIG_LCD */
-int board_init(void)
+int board_early_init_f(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- /* Enable Ctrlc */
- console_init_f();
-
- writel((1 << ATMEL_ID_PIOA) |
- (1 << ATMEL_ID_PIOCDE) |
- (1 << ATMEL_ID_PIOB),
+ /* Enable clocks for all PIOs */
+ writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
+ (1 << ATMEL_ID_PIOCDE),
&pmc->pcer);
+ at91_seriald_hw_init();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* arch number of AT91SAM9263EK-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_PM9263;
+
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- at91_seriald_hw_init();
#ifdef CONFIG_CMD_NAND
pm9263_nand_hw_init();
#endif
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 374be27..32c5962 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -172,6 +172,7 @@
#undef CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_USER_LOWLEVEL_INIT 1
+#define CONFIG_BOARD_EARLY_INIT_F
/*
* Hardware drivers
--
1.7.4.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH v2] pm9263: init serial console before relocation
2011-12-09 20:56 ` [U-Boot] [PATCH v2] " Asen Chavdarov Dimov
@ 2011-12-12 9:44 ` Anatolij Gustschin
0 siblings, 0 replies; 4+ messages in thread
From: Anatolij Gustschin @ 2011-12-12 9:44 UTC (permalink / raw)
To: u-boot
On Fri, 9 Dec 2011 22:56:55 +0200
Asen Chavdarov Dimov <dimov@ronetix.at> wrote:
> The early messages can be seen on the debug console.
>
> Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
> ---
> Change since v1
> - rebased over master
>
> board/ronetix/pm9263/pm9263.c | 22 ++++++++++++++--------
> include/configs/pm9263.h | 1 +
> 2 files changed, 15 insertions(+), 8 deletions(-)
Applied to u-boot-staging/agust at denx.de. Thanks!
Anatolij
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-12-12 9:44 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-09-13 12:21 [U-Boot] [PATCH] pm9263: init serial console before relocation Asen Chavdarov Dimov
2011-12-06 22:04 ` Anatolij Gustschin
2011-12-09 20:56 ` [U-Boot] [PATCH v2] " Asen Chavdarov Dimov
2011-12-12 9:44 ` Anatolij Gustschin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox