[U-Boot] [PATCH v3 3/3] mx28evk: Add initial support for MX28EVK board

[Marek Vasut <marek.vasut@gmail.com>]

> Add initial support for Freescale MX28EVK board.
> 
> Tested boot via SD card and by loading a kernel via TFTP through
> the FEC interface.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---

1) Do you use the DRAM init data used by DENX boards ?

> diff --git
> a/include/configs/mx28evk.h b/include/configs/mx28evk.h new file mode
> 100644
> index 0000000..40b64bf
> --- /dev/null
> +++ b/include/configs/mx28evk.h
> @@ -0,0 +1,172 @@
> +/*
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH

Please recheck these ;-)
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
> + * GNU General Public License for more details.
> + */
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#include <asm/arch/regs-base.h>
> +
> +/*
> + * SoC configurations
> + */
> +#define	CONFIG_MX28				/* i.MX28 SoC */
> +#define	CONFIG_MXS_GPIO				/* GPIO control */
> +#define	CONFIG_SYS_HZ		1000		/* Ticks per second */
> +
> +#define CONFIG_MACH_TYPE	MACH_TYPE_MX28EVK
> +
> +#define	CONFIG_SYS_NO_FLASH
> +#define	CONFIG_SYS_ICACHE_OFF
> +#define	CONFIG_SYS_DCACHE_OFF
> +#define	CONFIG_BOARD_EARLY_INIT_F
> +#define	CONFIG_ARCH_CPU_INIT
> +#define	CONFIG_ARCH_MISC_INIT
> +
> +/*
> + * SPL
> + */
> +#define CONFIG_SPL
> +#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
> +#define CONFIG_SPL_START_S_PATH	"arch/arm/cpu/arm926ejs/mx28"
> +#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mx28/u-boot-spl.lds"
> +#define CONFIG_SPL_LIBCOMMON_SUPPORT
> +#define CONFIG_SPL_LIBGENERIC_SUPPORT
> +
> +/*
> + * U-Boot Commands
> + */
> +#include <config_cmd_default.h>
> +#define	CONFIG_DISPLAY_CPUINFO
> +#define	CONFIG_DOS_PARTITION
> +#define CONFIG_CMD_FAT
> +
> +#define	CONFIG_CMD_CACHE
> +#define	CONFIG_CMD_DHCP
> +#define	CONFIG_CMD_GPIO
> +#define	CONFIG_CMD_MII
> +#define	CONFIG_CMD_MMC
> +#define	CONFIG_CMD_NET
> +#define	CONFIG_CMD_NFS
> +#define	CONFIG_CMD_PING
> +
> +/*
> + * Memory configurations
> + */
> +#define	CONFIG_NR_DRAM_BANKS		1		/* 1 bank of 
DRAM */
> +#define	PHYS_SDRAM_1			0x40000000	/* Base address 
*/
> +#define	PHYS_SDRAM_1_SIZE		0x40000000	/* Max 1 GB RAM 
*/
> +#define	CONFIG_STACKSIZE		(128 * 1024)	/* 128 KB stack 
*/
> +#define	CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for 
malloc */
> +#define	CONFIG_SYS_MEMTEST_START	0x40000000	/* Memtest start 
adr */
> +#define	CONFIG_SYS_MEMTEST_END		0x40400000	/* 4 MB RAM test 
*/
> +#define	CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
> +/* Point initial SP in SRAM so SPL can use it too. */
> +
> +#define CONFIG_SYS_INIT_RAM_ADDR	0x00002000
> +#define CONFIG_SYS_INIT_RAM_SIZE	(128 * 1024)
> +
> +#define CONFIG_SYS_INIT_SP_OFFSET \
> +	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
> +#define CONFIG_SYS_INIT_SP_ADDR \
> +	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
> +
> +/*
> + * We need to sacrifice first 4 bytes of RAM here to avoid triggering some
> + * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
> + * binary. In case there was more of this mess, 0x100 bytes are skipped.
> + */
> +#define	CONFIG_SYS_TEXT_BASE		0x40000100
> +
> +#define CONFIG_ENV_OVERWRITE
> +/*
> + * U-Boot general configurations
> + */
> +#define	CONFIG_SYS_LONGHELP
> +#define	CONFIG_SYS_PROMPT	"MX28EVK U-Boot > "
> +#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer 
size */
> +#define	CONFIG_SYS_PBSIZE	\
> +	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
> +						/* Print buffer size */
> +#define	CONFIG_SYS_MAXARGS	32		/* Max number of command 
args */
> +#define	CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
> +						/* Boot argument buffer size */
> +#define	CONFIG_VERSION_VARIABLE			/* U-BOOT version */
> +#define	CONFIG_AUTO_COMPLETE			/* Command auto complete 
*/
> +#define	CONFIG_CMDLINE_EDITING			/* Command history etc 
*/
> +#define	CONFIG_SYS_HUSH_PARSER
> +#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
> +
> +/*
> + * Serial Driver
> + */
> +#define	CONFIG_PL011_SERIAL
> +#define	CONFIG_PL011_CLOCK		24000000
> +#define	CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
> +#define	CONFIG_CONS_INDEX		0
> +#define	CONFIG_BAUDRATE			115200	/* Default baud rate */
> +#define	CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 
115200 }
> +
> +/*
> + * MMC Driver
> + */
> +#ifdef	CONFIG_CMD_MMC
> +#define	CONFIG_MMC
> +#define CONFIG_ENV_IS_IN_MMC
> +#define CONFIG_ENV_OFFSET	(256 * 1024)
> +#define CONFIG_ENV_SIZE		(16 * 1024)
> +#define CONFIG_SYS_MMC_ENV_DEV 0
> +#define CONFIG_CMD_SAVEENV
> +#define	CONFIG_GENERIC_MMC
> +#define	CONFIG_MXS_MMC
> +#endif
> +
> +/*
> + * Ethernet on SOC (FEC)
> + */
> +#ifdef	CONFIG_CMD_NET
> +#define	CONFIG_NET_MULTI
> +#define	CONFIG_ETHPRIME			"FEC0"
> +#define	CONFIG_FEC_MXC
> +#define	CONFIG_FEC_MXC_MULTI
> +#define	CONFIG_MII
> +#define	CONFIG_DISCOVER_PHY
> +#define	CONFIG_FEC_XCV_TYPE		RMII
> +#define CONFIG_MX28_FEC_MAC_IN_OCOTP
> +#endif
> +
> +/*
> + * Boot Linux
> + */
> +#define	CONFIG_CMDLINE_TAG
> +#define	CONFIG_SETUP_MEMORY_TAGS
> +#define	CONFIG_BOOTDELAY	3
> +#define	CONFIG_BOOTFILE		"uImage"
> +#define	CONFIG_BOOTCOMMAND	"run bootcmd_net"
> +#define	CONFIG_LOADADDR		0x42000000
> +#define	CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
> +
> +/*
> + * Extra Environments
> + */
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> +	"console_fsl=console=ttyAM0" \
> +	"console_mainline=console=ttyAMA0" \
> +	"netargs=setenv bootargs console=${console_mainline}" \
> +		"root=/dev/nfs " \
> +		"ip=dhcp nfsroot=${serverip}:${nfsroot}\0" \
> +	"bootcmd_net=echo Booting from net ...; " \
> +		"run netargs; " \
> +		"dhcp ${uimage}; bootm\0" \
> +
> +#endif /* __CONFIG_H */

Otherwise it seems OK.

M