From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sat, 17 Dec 2011 04:17:37 +0100
Subject: [U-Boot] [PATCH v5 3/3] mx28evk: Add initial support for
	MX28EVK board
In-Reply-To: <4EEB5BDA.7070202@bluegiga.com>
References: <1323966067-28333-1-git-send-email-fabio.estevam@freescale.com>
	<1323986861-21808-3-git-send-email-festevam@gmail.com>
	<4EEB5BDA.7070202@bluegiga.com>
Message-ID: <201112170417.37646.marek.vasut@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

> Hi Fabio,
> 
> On 12/16/2011 12:07 AM, Fabio Estevam wrote:
> > Tested boot via SD card and by loading a kernel via TFTP through
> > the FEC interface.
> 
> Have you any idea why this works from SD card but not by USB recovery
> using exactly same sb file?
> 
> By quick look it seems that control is not passed back to the ROM
> properly after SPL or ROM is unable to load/run U-Boot after SPL.

What do you mean? The SPL only inits the hardware and then lets the bootrom do 
whatever it wants again with the next file in u-boot.bd.