From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Tue, 20 Dec 2011 14:03:18 +0100 Subject: [U-Boot] sata_sil Driver on a PowerPC In-Reply-To: <201112200759.13250.johnc@datadesigncorp.net> References: <201112200541.50766.sr@denx.de> <201112200759.13250.johnc@datadesigncorp.net> Message-ID: <201112201403.18901.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tuesday 20 December 2011 13:59:12 John M Cavallo wrote: > Thanks, but it didn't work. The 3114 is a very different beast from the > 3132. I meant CONFIG_SATA_SIL. > Re-reading the original message, I realized that I had copied the > configuration from another attempt (I really have to work on my proof > reeding skills). I should have said that I was using the sata_sil.c driver > which claims to support the 3132. I am using the configuration: > > #define CONFIG_CMD_SATA > > #define CONFIG_SATA_SIL 1 > #define CONFIG_LIBATA 1 > #define CONFIG_LBA48 1 > > #define CONFIG_SYS_SATA_MAX_DEVICE 2 If this doesn't work (I have never used it before), and nobody else has any ideas, then you need to debug this issue... Best regards, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de