From: Anatolij Gustschin <agust@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] CPU POST on MPC5200 fails with U-Boot built using GCC 4.6.1
Date: Fri, 23 Dec 2011 00:21:50 +0100 [thread overview]
Message-ID: <20111223002150.7e9d387d@wker> (raw)
Hi,
I noticed a problem while testing Wolfgang's patch
PPC: fix "Warning: FOO uses hard float, BAR uses soft float".
U-Boot built for TQM5200 using ELDK-5.1 powerpc toolchain
seems to have issues in CPU POST test. I see similar problem
both with and also without Wolfgang's patch applied:
U-Boot 2011.12-rc3-00002-gaf44f4b (Dec 23 2011 - 00:08:10)
CPU: MPC5200 v1.2, Core v1.1 at 396 MHz
Bus 132 MHz, IPB 132 MHz, PCI 66 MHz
Board: TQM5200 (TQ-Components GmbH)
on a STK52xx carrier board
I2C: 85 kHz, ready
DRAM: 64 MiB
Flash: 32 MiB
In: serial
Out: serial
Err: serial
Net: FEC
POST i2c PASSED
POST cpu Error at multi test !
FAILED
^^^^^^
IDE: Bus 0: OK
Device 0: Model: 32MB CHH Firm: Rev 1.01 Ser#: 403303C48A30730031
Type: Removable Hard Disk
Capacity: 30.5 MB = 0.0 GB (62592 x 512)
Device 1: not available
SRAM: 512 kB
VGA: SMI501 (Voyager) with 8 MB
PS/2: No device found
Kbd: reset failed, no ACK
Type run flash_nfs to mount root filesystem over NFS
Anatolij
next reply other threads:[~2011-12-22 23:21 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-22 23:21 Anatolij Gustschin [this message]
2011-12-23 11:29 ` [U-Boot] [PATCH 1/3] post/lib_powerpc/multi.c: make checkpatch clean Wolfgang Denk
2011-12-23 11:29 ` [U-Boot] [PATCH 2/3] post/lib_powerpc/multi.c: code cleanup Wolfgang Denk
2011-12-23 12:45 ` Anatolij Gustschin
2011-12-23 19:07 ` Wolfgang Denk
2011-12-23 11:29 ` [U-Boot] [PATCH 3/3] post/lib_powerpc/multi.c: fix stack overflow error Wolfgang Denk
2011-12-23 16:06 ` Anatolij Gustschin
2011-12-23 19:10 ` Wolfgang Denk
2011-12-23 19:08 ` Wolfgang Denk
2011-12-23 12:39 ` [U-Boot] [PATCH 1/3] post/lib_powerpc/multi.c: make checkpatch clean Anatolij Gustschin
2011-12-23 19:07 ` Wolfgang Denk
2011-12-23 19:06 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111223002150.7e9d387d@wker \
--to=agust@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox