From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Frysinger Date: Fri, 6 Jan 2012 01:57:25 -0500 Subject: [U-Boot] User Question In-Reply-To: <5D308BD40154E4439D82454FE483A502059712C0@EVS4.nam.ci.root> References: <5D308BD40154E4439D82454FE483A502059712C0@EVS4.nam.ci.root> Message-ID: <201201060157.26490.vapier@gentoo.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tuesday 03 January 2012 16:26:54 Bishop, Mark wrote: > Is this the list I can ask questions for deploying uboot to a custom > board based off the blackfin bf548? this is the list for anything u-boot related > Some of my questions are not processor specific (like what is the > approach to getting the micrel ks8995 and a smsc lan9215 talking and > started -the ks8995 needs a spi start command)? the bf518f-ezbrd has a ksz8803m on it, but it supports it by open-coding things in board/bf518f-ezbrd/bf518f-ezbrd.c. there's a bit more logic than normal due to it handling different revs of the board -- older ones had the switch, but newer ones do not, hence it does runtime detection to support one binary image for all revs. i recall seeing people post about ksz switches in general, but i don't think that got anywhere, so what we did for the bf518f-ezbrd is probably your best bet for now. -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. URL: