[U-Boot] [PATCH 3/4] zipitz2: use pxa_mmc_gen as MMC driver

[Marek Vasut <marek.vasut@gmail.com>]

> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
> ---
>  board/zipitz2/zipitz2.c   |    8 ++++++++
>  include/configs/zipitz2.h |    5 +++--
>  2 files changed, 11 insertions(+), 2 deletions(-)
> 
> diff --git a/board/zipitz2/zipitz2.c b/board/zipitz2/zipitz2.c
> index b093c2f..4075fb6 100644
> --- a/board/zipitz2/zipitz2.c
> +++ b/board/zipitz2/zipitz2.c
> @@ -79,6 +79,14 @@ void dram_init_banksize(void)
>  	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
>  }
> 
> +#ifdef	CONFIG_CMD_MMC
> +int board_mmc_init(bd_t *bis)
> +{
> +	pxa_mmc_register(0);
> +	return 0;
> +}
> +#endif
> +
>  #ifdef	CONFIG_CMD_SPI
> 
>  struct {
> diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
> index 5560bef..8c48d01 100644
> --- a/include/configs/zipitz2.h
> +++ b/include/configs/zipitz2.h
> @@ -45,7 +45,7 @@
>  #define	CONFIG_ARCH_CPU_INIT
> 
>  #define	CONFIG_BOOTCOMMAND						
\
> -	"if mmc init && fatload mmc 0 0xa0000000 uboot.script ; then "	\
> +	"if ext2load mmc 0 0xa0000000 boot/uboot.script ; then "	\
>  		"source 0xa0000000; "					\

Aren't you missing "mmc rescan" or something ?

>  	"else "								\
>  		"bootm 0x60000; "					\
> @@ -92,7 +92,8 @@
>   */
>  #ifdef	CONFIG_CMD_MMC
>  #define	CONFIG_MMC
> -#define	CONFIG_PXA_MMC
> +#define	CONFIG_GENERIC_MMC
> +#define	CONFIG_PXA_MMC_GENERIC
>  #define	CONFIG_SYS_MMC_BASE		0xF0000000
>  #define	CONFIG_CMD_FAT
>  #define CONFIG_CMD_EXT2