From: Marek Vasut <marek.vasut@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files
Date: Wed, 11 Jan 2012 13:49:49 +0100 [thread overview]
Message-ID: <201201111349.49466.marek.vasut@gmail.com> (raw)
In-Reply-To: <1326286051-14349-1-git-send-email-festevam@gmail.com>
> CONFIG_NET_MULTI is not used anymore, so remove it from board files.
>
> Cc: Marek Vasut <marek.vasut@gmail.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Kumar Gala <kumar.gala@freescale.com>
> Cc: Sandeep Paulraj <s-paulraj@ti.com>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
For efikamx:
Tested-by: Marek Vasut <marek.vasut@gmail.com>
> ---
> include/configs/P1010RDB.h | 5 -----
> include/configs/PM826.h | 2 --
> include/configs/PM828.h | 2 --
> include/configs/cam_enc_4xx.h | 1 -
> include/configs/coreboot.h | 6 ------
> include/configs/da850_am18xxevm.h | 1 -
> include/configs/ecovec.h | 1 -
> include/configs/efikamx.h | 1 -
> include/configs/enbw_cmc.h | 1 -
> include/configs/ethernut5.h | 1 -
> include/configs/flea3.h | 1 -
> include/configs/m28evk.h | 1 -
> include/configs/omap3_evm_common.h | 1 -
> include/configs/omap3_mvblx.h | 1 -
> include/configs/p1_p2_rdb_pc.h | 7 -------
> include/configs/tam3517-common.h | 1 -
> 16 files changed, 0 insertions(+), 33 deletions(-)
>
> diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
> index af4609f..a9251b4 100644
> --- a/include/configs/P1010RDB.h
> +++ b/include/configs/P1010RDB.h
> @@ -518,11 +518,6 @@ extern unsigned long get_sdram_size(void);
> #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
> #endif
>
> -#if defined(CONFIG_TSEC_ENET)
> -#ifndef CONFIG_NET_MULTI
> -#define CONFIG_NET_MULTI
> -#endif
> -
> #define CONFIG_MII /* MII PHY management */
> #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
> #define CONFIG_TSEC1 1
> diff --git a/include/configs/PM826.h b/include/configs/PM826.h
> index f4f9305..cde0fd6 100644
> --- a/include/configs/PM826.h
> +++ b/include/configs/PM826.h
> @@ -100,11 +100,9 @@
> *
> * if CONFIG_ETHER_ON_SCC is selected, then
> * - CONFIG_ETHER_INDEX must be set to the channel number (1-4)
> - * - CONFIG_NET_MULTI must not be defined
> *
> * if CONFIG_ETHER_ON_FCC is selected, then
> * - one or more CONFIG_ETHER_ON_FCCx (x=1,2,3) must also be selected
> - * - CONFIG_NET_MULTI must be defined
> *
> * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must
> be * defined elsewhere (as for the console), or CONFIG_CMD_NET must be
> unset. diff --git a/include/configs/PM828.h b/include/configs/PM828.h
> index 28666d6..74ced5a 100644
> --- a/include/configs/PM828.h
> +++ b/include/configs/PM828.h
> @@ -100,11 +100,9 @@
> *
> * if CONFIG_ETHER_ON_SCC is selected, then
> * - CONFIG_ETHER_INDEX must be set to the channel number (1-4)
> - * - CONFIG_NET_MULTI must not be defined
> *
> * if CONFIG_ETHER_ON_FCC is selected, then
> * - one or more CONFIG_ETHER_ON_FCCx (x=1,2,3) must also be selected
> - * - CONFIG_NET_MULTI must be defined
> *
> * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must
> be * defined elsewhere (as for the console), or CONFIG_CMD_NET must be
> unset. diff --git a/include/configs/cam_enc_4xx.h
> b/include/configs/cam_enc_4xx.h index a21d448..50a967c 100644
> --- a/include/configs/cam_enc_4xx.h
> +++ b/include/configs/cam_enc_4xx.h
> @@ -68,7 +68,6 @@
> #define CONFIG_BOOTP_DNS2
> #define CONFIG_BOOTP_SEND_HOSTNAME
> #define CONFIG_NET_RETRY_COUNT 10
> -#define CONFIG_NET_MULTI
> #define CONFIG_CMD_MII
> #define CONFIG_SYS_DCACHE_OFF
> #define CONFIG_RESET_PHY_R
> diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
> index 348a25b..2c65d74 100644
> --- a/include/configs/coreboot.h
> +++ b/include/configs/coreboot.h
> @@ -216,10 +216,4 @@
> */
> #define CONFIG_PCI
>
> -/*-----------------------------------------------------------------------
> - * Network device support
> - */
> -#define CONFIG_NET_MULTI
> -
> -
> #endif /* __CONFIG_H */
> diff --git a/include/configs/da850_am18xxevm.h
> b/include/configs/da850_am18xxevm.h index 9b7bf1e..6fb3920 100644
> --- a/include/configs/da850_am18xxevm.h
> +++ b/include/configs/da850_am18xxevm.h
> @@ -125,7 +125,6 @@
> #define CONFIG_BOOTP_DNS2
> #define CONFIG_BOOTP_SEND_HOSTNAME
> #define CONFIG_NET_RETRY_COUNT 10
> -#define CONFIG_NET_MULTI
> #endif
>
> #ifdef CONFIG_USE_NOR
> diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h
> index 2e2a9a7..4549a4c 100644
> --- a/include/configs/ecovec.h
> +++ b/include/configs/ecovec.h
> @@ -88,7 +88,6 @@
> #define CONFIG_SH_I2C_BASE1 0xA4750000
>
> /* Ether */
> -#define CONFIG_NET_MULTI 1
> #define CONFIG_SH_ETHER 1
> #define CONFIG_SH_ETHER_USE_PORT (0)
> #define CONFIG_SH_ETHER_PHY_ADDR (0x1f)
> diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h
> index 522487b..e2f0f74 100644
> --- a/include/configs/efikamx.h
> +++ b/include/configs/efikamx.h
> @@ -206,7 +206,6 @@
> /* USB NET */
> #ifdef CONFIG_CMD_NET
> #define CONFIG_USB_ETHER_ASIX
> -#define CONFIG_NET_MULTI
> #define CONFIG_CMD_PING
> #define CONFIG_CMD_DHCP
> #endif
> diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h
> index c427dc7..5c14379 100644
> --- a/include/configs/enbw_cmc.h
> +++ b/include/configs/enbw_cmc.h
> @@ -146,7 +146,6 @@
> #define CONFIG_BOOTP_DNS2
> #define CONFIG_BOOTP_SEND_HOSTNAME
> #define CONFIG_NET_RETRY_COUNT 10
> -#define CONFIG_NET_MULTI
> #endif
>
> /*
> diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
> index f878665..604d2dd 100644
> --- a/include/configs/ethernut5.h
> +++ b/include/configs/ethernut5.h
> @@ -179,7 +179,6 @@
> #endif
>
> /* Ethernet */
> -#define CONFIG_NET_MULTI
> #define CONFIG_NET_RETRY_COUNT 20
> #define CONFIG_MACB
> #define CONFIG_RMII
> diff --git a/include/configs/flea3.h b/include/configs/flea3.h
> index aac3930..649e272 100644
> --- a/include/configs/flea3.h
> +++ b/include/configs/flea3.h
> @@ -113,7 +113,6 @@
> /*
> * Ethernet on SOC (FEC)
> */
> -#define CONFIG_NET_MULTI
> #define CONFIG_FEC_MXC
> #define IMX_FEC_BASE FEC_BASE_ADDR
> #define CONFIG_PHYLIB
> diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
> index 39c841f..51eb1c1 100644
> --- a/include/configs/m28evk.h
> +++ b/include/configs/m28evk.h
> @@ -179,7 +179,6 @@
> * Ethernet on SOC (FEC)
> */
> #ifdef CONFIG_CMD_NET
> -#define CONFIG_NET_MULTI
> #define CONFIG_ETHPRIME "FEC0"
> #define CONFIG_FEC_MXC
> #define CONFIG_FEC_MXC_MULTI
> diff --git a/include/configs/omap3_evm_common.h
> b/include/configs/omap3_evm_common.h index b256317..4910dda 100644
> --- a/include/configs/omap3_evm_common.h
> +++ b/include/configs/omap3_evm_common.h
> @@ -248,7 +248,6 @@
> #if defined(CONFIG_CMD_NET)
>
> /* Ethernet (SMSC9115 from SMSC9118 family) */
> -#define CONFIG_NET_MULTI
> #define CONFIG_SMC911X
> #define CONFIG_SMC911X_32_BIT
> #define CONFIG_SMC911X_BASE 0x2C000000
> diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h
> index eb51ea9..0d78529 100644
> --- a/include/configs/omap3_mvblx.h
> +++ b/include/configs/omap3_mvblx.h
> @@ -272,7 +272,6 @@
>
> *-------------------------------------------------------------------------
> --- */
> #if defined(CONFIG_CMD_NET)
> - #define CONFIG_NET_MULTI
> #define CONFIG_SMC911X 1
> #define CONFIG_SMC911X_32_BIT
> #define CONFIG_SMC911X_BASE 0x2C000000
> diff --git a/include/configs/p1_p2_rdb_pc.h
> b/include/configs/p1_p2_rdb_pc.h index 8e8fa16..9297dd0 100644
> --- a/include/configs/p1_p2_rdb_pc.h
> +++ b/include/configs/p1_p2_rdb_pc.h
> @@ -630,7 +630,6 @@
> #endif
> #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
>
> -#define CONFIG_NET_MULTI
> #define CONFIG_PCI_PNP /* do pci plug-and-play */
> #define CONFIG_E1000 /* Defind e1000 pci Ethernet card*/
> #define CONFIG_CMD_PCI
> @@ -640,12 +639,6 @@
> #define CONFIG_DOS_PARTITION
> #endif /* CONFIG_PCI */
>
> -#if defined(CONFIG_TSEC_ENET)
> -
> -#ifndef CONFIG_NET_MULTI
> -#define CONFIG_NET_MULTI
> -#endif
> -
> #define CONFIG_MII /* MII PHY management */
> #define CONFIG_TSEC1
> #define CONFIG_TSEC1_NAME "eTSEC1"
> diff --git a/include/configs/tam3517-common.h
> b/include/configs/tam3517-common.h index 817d468..6682714 100644
> --- a/include/configs/tam3517-common.h
> +++ b/include/configs/tam3517-common.h
> @@ -238,7 +238,6 @@
> #define CONFIG_BOOTP_DNS2
> #define CONFIG_BOOTP_SEND_HOSTNAME
> #define CONFIG_NET_RETRY_COUNT 10
> -#define CONFIG_NET_MULTI
>
> /* Defines for SPL */
> #define CONFIG_SPL
next prev parent reply other threads:[~2012-01-11 12:49 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-11 12:47 [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files Fabio Estevam
2012-01-11 12:49 ` Marek Vasut [this message]
2012-01-11 13:38 ` Heiko Schocher
2012-01-11 14:06 ` Kumar Gala
2012-01-11 14:06 ` Stefano Babic
2012-01-11 16:19 ` Tom Rini
2012-01-14 10:08 ` Stefano Babic
2012-01-15 1:12 ` Mike Frysinger
2012-01-15 14:13 ` Stefano Babic
2012-01-15 0:53 ` Mike Frysinger
2012-01-15 15:03 ` [U-Boot] [PATCH v2] " Fabio Estevam
2012-01-15 15:06 ` Tom Rini
2012-01-15 18:38 ` Mike Frysinger
2012-01-17 10:22 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201201111349.49466.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox