* [U-Boot] Please pull u-boot-staging/sr@denx.de - UPDATE
@ 2012-01-12 7:57 Stefan Roese
2012-01-13 19:28 ` Wolfgang Denk
0 siblings, 1 reply; 2+ messages in thread
From: Stefan Roese @ 2012-01-12 7:57 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
please pull Simon's "Unified command execution in one place" patch series
plus one patch from Eric Miao:
The following changes since commit 9a420986cccc9bd2c37affd931d627b3c3e72952:
ARM: highbank: enable networking and pxe (2012-01-05 20:10:38 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-staging.git sr at denx.de
Eric Miao (1):
net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Simon Glass (9):
Remove CMD_PXE's static on run_command()
Rename run_command() to builtin_run_command()
Rename run_command2() to run_command()
Stop using builtin_run_command()
Don't include standard parser if hush is used
Create a single cmd_call() function to handle command execution
Remove interleave of non-U-Boot code in hush
Add cmd_process() to process commands in one place
Convert cmd_usage() calls in common to use a return value
arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 7 +--
board/esd/common/cmd_loadpci.c | 2 +-
board/esd/du440/du440.c | 2 +-
common/cmd_bedbug.c | 6 +-
common/cmd_bmp.c | 6 +-
common/cmd_boot.c | 2 +-
common/cmd_bootm.c | 10 +---
common/cmd_cache.c | 4 +-
common/cmd_dataflash_mmc_mux.c | 2 +-
common/cmd_date.c | 3 +-
common/cmd_dcr.c | 8 +-
common/cmd_df.c | 2 +-
common/cmd_eeprom.c | 2 +-
common/cmd_ext2.c | 4 +-
common/cmd_fdc.c | 2 +-
common/cmd_fdos.c | 2 +-
common/cmd_fdt.c | 14 ++--
common/cmd_fitupd.c | 2 +-
common/cmd_flash.c | 14 ++--
common/cmd_fpga.c | 4 +-
common/cmd_gpio.c | 2 +-
common/cmd_i2c.c | 32 +++++-----
common/cmd_ide.c | 10 ++--
common/cmd_irq.c | 2 +-
common/cmd_itest.c | 2 +-
common/cmd_led.c | 6 +-
common/cmd_load.c | 2 +-
common/cmd_log.c | 4 +-
common/cmd_md5sum.c | 2 +-
common/cmd_mdio.c | 2 +-
common/cmd_mem.c | 22 ++++----
common/cmd_mfsl.c | 10 ++--
common/cmd_mgdisk.c | 2 +-
common/cmd_mii.c | 4 +-
common/cmd_misc.c | 2 +-
common/cmd_mmc.c | 14 ++--
common/cmd_mmc_spi.c | 3 +-
common/cmd_mp.c | 8 +-
common/cmd_mtdparts.c | 2 +-
common/cmd_nand.c | 6 +-
common/cmd_net.c | 6 +-
common/cmd_nvedit.c | 22 ++++----
common/cmd_onenand.c | 12 ++--
common/cmd_otp.c | 2 +-
common/cmd_pci.c | 2 +-
common/cmd_portio.c | 4 +-
common/cmd_pxe.c | 10 ++--
common/cmd_reiser.c | 4 +-
common/cmd_sata.c | 8 +-
common/cmd_scsi.c | 15 +++--
common/cmd_setexpr.c | 2 +-
common/cmd_sf.c | 2 +-
common/cmd_sha1sum.c | 2 +-
common/cmd_source.c | 2 +-
common/cmd_strings.c | 2 +-
common/cmd_time.c | 4 +-
common/cmd_ubi.c | 4 +-
common/cmd_ubifs.c | 10 ++--
common/cmd_unzip.c | 2 +-
common/cmd_usb.c | 6 +-
common/command.c | 60 ++++++++++++++++++++
common/hush.c | 73 +++++++-----------------
common/main.c | 98 +++++++++++----------------------
include/command.h | 24 ++++++++
include/common.h | 5 +-
net/eth.c | 3 +-
66 files changed, 312 insertions(+), 307 deletions(-)
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] Please pull u-boot-staging/sr@denx.de - UPDATE
2012-01-12 7:57 [U-Boot] Please pull u-boot-staging/sr@denx.de - UPDATE Stefan Roese
@ 2012-01-13 19:28 ` Wolfgang Denk
0 siblings, 0 replies; 2+ messages in thread
From: Wolfgang Denk @ 2012-01-13 19:28 UTC (permalink / raw)
To: u-boot
Dear Stefan Roese,
In message <201201120857.53052.sr@denx.de> you wrote:
> Hi Wolfgang,
>
> please pull Simon's "Unified command execution in one place" patch series
> plus one patch from Eric Miao:
>
> The following changes since commit 9a420986cccc9bd2c37affd931d627b3c3e72952:
>
> ARM: highbank: enable networking and pxe (2012-01-05 20:10:38 +0100)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-staging.git sr at denx.de
>
> Eric Miao (1):
> net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
>
> Simon Glass (9):
> Remove CMD_PXE's static on run_command()
> Rename run_command() to builtin_run_command()
> Rename run_command2() to run_command()
> Stop using builtin_run_command()
> Don't include standard parser if hush is used
> Create a single cmd_call() function to handle command execution
> Remove interleave of non-U-Boot code in hush
> Add cmd_process() to process commands in one place
> Convert cmd_usage() calls in common to use a return value
Sorry, but I will not pull these.
Eric's patch has an incomplete andincorrect commit message,
and Simon's pattches seem to messing up the error handling;
see my previous messages.
Thanks anyway for the effort.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
All these theories, diverse as they are, have two things in common:
they explain the observed facts, and they are completeley and utterly
wrong. - Terry Pratchett, _The Light Fantastic_
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-01-13 19:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-01-12 7:57 [U-Boot] Please pull u-boot-staging/sr@denx.de - UPDATE Stefan Roese
2012-01-13 19:28 ` Wolfgang Denk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox