[U-Boot] Please pull u-boot-mmc.git

[Wolfgang Denk <wd@denx.de>]

Dear Andy Fleming,

In message <1326080645-5780-1-git-send-email-afleming@freescale.com> you wrote:
> The following changes since commit 9a420986cccc9bd2c37affd931d627b3c3e72952:
> 
>   ARM: highbank: enable networking and pxe (2012-01-05 20:10:38 +0100)
> 
> are available in the git repository at:
>   git://www.denx.de/git/u-boot-mmc.git master
> 
> Anatolij Gustschin (1):
>       drivers/mmc/mv_sdhci.c: Fix build warning
> 
> Ira Snyder (1):
>       fsl_esdhc: fix PIO mode transfers
> 
> Jason Liu (1):
>       i.mx: fsl_esdhc: add the i.mx6q support
> 
> Macpaul Lin (2):
>       mmc: add host_caps checking avoid switch card improperly
>       ftsdc010: improve performance and capability
> 
> Thierry Reding (4):
>       mmc: Change board_mmc_getcd() function prototype.
>       mmc: Implement card detection.
>       mmc: fsl_esdhc: Implement card-detect hook.
>       mmc: tegra2: Implement card-detect hook.
> 
>  board/efikamx/efikamx.c             |    9 +-
>  board/emk/top9000/top9000.c         |   12 +--
>  board/freescale/mx51evk/mx51evk.c   |    9 +-
>  board/freescale/mx53ard/mx53ard.c   |    9 +-
>  board/freescale/mx53evk/mx53evk.c   |    9 +-
>  board/freescale/mx53loco/mx53loco.c |    9 +-
>  board/freescale/mx53smd/mx53smd.c   |    6 +-
>  doc/README.atmel_mci                |   12 +--
>  drivers/mmc/arm_pl180_mmci.c        |    1 +
>  drivers/mmc/bfin_sdh.c              |    1 +
>  drivers/mmc/davinci_mmc.c           |    1 +
>  drivers/mmc/fsl_esdhc.c             |   42 ++++----
>  drivers/mmc/ftsdc010_esdhc.c        |  189 +++++++++++++++++++----------------
>  drivers/mmc/gen_atmel_mci.c         |    1 +
>  drivers/mmc/mmc.c                   |   32 ++++++-
>  drivers/mmc/mmc_spi.c               |    1 +
>  drivers/mmc/mv_sdhci.c              |    3 +-
>  drivers/mmc/mxcmmc.c                |    1 +
>  drivers/mmc/mxsmmc.c                |    1 +
>  drivers/mmc/omap_hsmmc.c            |    1 +
>  drivers/mmc/pxa_mmc_gen.c           |    1 +
>  drivers/mmc/s5p_mmc.c               |    1 +
>  drivers/mmc/sdhci.c                 |    1 +
>  drivers/mmc/sh_mmcif.c              |    1 +
>  drivers/mmc/tegra2_mmc.c            |   32 +++----
>  include/mmc.h                       |    4 +-
>  26 files changed, 217 insertions(+), 172 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Hegel was right when he said that we learn from history that man  can
never learn anything from history.              - George Bernard Shaw