From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sun, 29 Jan 2012 20:18:15 +0100
Subject: [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default
	serial flash bus and chip-select
In-Reply-To: <1327863595-1524-7-git-send-email-eric.nelson@boundarydevices.com>
References: <1327863595-1524-1-git-send-email-eric.nelson@boundarydevices.com>
	<1327863595-1524-7-git-send-email-eric.nelson@boundarydevices.com>
Message-ID: <201201292018.15677.marek.vasut@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
> Acked-by: Stefano Babic <sbabic@denx.de>
> ---
>  include/configs/mx6qsabrelite.h |    3 +++
>  1 files changed, 3 insertions(+), 0 deletions(-)
> 
> diff --git a/include/configs/mx6qsabrelite.h
> b/include/configs/mx6qsabrelite.h index 8dd6e39..cc770e2 100644
> --- a/include/configs/mx6qsabrelite.h
> +++ b/include/configs/mx6qsabrelite.h
> @@ -46,9 +46,12 @@
> 
>  #define CONFIG_CMD_SF
>  #ifdef CONFIG_CMD_SF
> +#define GPIO_3_19 ((2*32)+19)

I'd expect this to be in platform headers?

>  #define CONFIG_SPI_FLASH
>  #define CONFIG_SPI_FLASH_SST
>  #define CONFIG_MXC_SPI
> +#define CONFIG_SF_DEFAULT_BUS  0
> +#define CONFIG_SF_DEFAULT_CS   (0|(GPIO_3_19<<8))
>  #define CONFIG_SF_DEFAULT_SPEED 25000000
>  #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
>  #endif