From: Mike Frysinger <vapier@gentoo.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects
Date: Wed, 1 Feb 2012 12:00:37 -0500 [thread overview]
Message-ID: <201202011200.40182.vapier@gentoo.org> (raw)
In-Reply-To: <4F29223C.8080401@denx.de>
On Wednesday 01 February 2012 06:30:04 Stefano Babic wrote:
> On 31/01/2012 20:14, Eric Nelson wrote:
> > On 01/31/2012 11:11 AM, Mike Frysinger wrote:
> >> On Tuesday 31 January 2012 12:52:06 Eric Nelson wrote:
> >>> Patch 1 modifies the 'sf' command to allow a default bus and
> >>> chip-select
> >>>
> >>> to be specified by board headers. This allows a bare 'sf' probe command:
> >>> U-Boot> sf probe
> >>>
> >>> instead of the more cumbersome usage when a GPIO is tacked onto
> >>> the chip-select. Otherwise, this command-line would be needed
> >>>
> >>> to specify GP3:19 on SabreLite:
> >>> U-Boot> sf probe 0x5300
> >>>
> >>> Patch 2 provides a description of usage and configuration of
> >>> CONFIG_CMD_SF.
> >>
> >> you can drop these two SF patches from your mx6q series. i don't want
> >> to keep
> >> checking to see if you've updated them :p.
> >
> > I figured as much, but I can't really test them without the rest of the
> > series...
>
> It does not matter - Mike, what do you think if I merge the whole
> patchset into u-boot-imx ? Else the mx6qsabrelite board cannot be built
> until all patches will be merged by Wolfgang.
i don't see why this series depends on the two spi flash patches. they were
both "nice to have" patches which only change the default `sf` behavior. the
boards will compile & run perfectly fine without them.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120201/5866ffb6/attachment.pgp>
next prev parent reply other threads:[~2012-02-01 17:00 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-31 17:52 [U-Boot] [PATCH V6 - Part 1 - 1/1] mx6q: define GPIO macros for translating between ordinals and port:index Eric Nelson
2012-01-31 17:52 ` [U-Boot] [PATCH V6 - Part 2 - 0/3] mxc_spi refactoring (for mx6q and mx6qsabrelite) Eric Nelson
2012-01-31 17:52 ` [U-Boot] [PATCH V6 - Part 2 - 1/3] mxc_spi: move machine specifics into CPU headers Eric Nelson
2012-02-01 11:23 ` Jason Hui
2012-02-08 11:23 ` Stefano Babic
2012-01-31 17:52 ` [U-Boot] [PATCH V6 - Part 2 - 2/3] mx6q: Add support for ECSPI through mxc_spi driver Eric Nelson
2012-02-01 11:24 ` Jason Hui
2012-02-08 11:23 ` Stefano Babic
2012-01-31 17:52 ` [U-Boot] [PATCH V6 - Part 2 - 3/3] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform Eric Nelson
2012-02-01 11:25 ` Jason Hui
2012-02-08 11:23 ` Stefano Babic
2012-01-31 17:52 ` [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects Eric Nelson
2012-01-31 18:11 ` Mike Frysinger
2012-01-31 19:14 ` Eric Nelson
2012-02-01 11:30 ` Stefano Babic
2012-02-01 11:35 ` Dirk Behme
2012-02-01 17:00 ` Mike Frysinger [this message]
2012-02-01 19:31 ` Eric Nelson
2012-02-01 21:04 ` Mike Frysinger
2012-02-02 9:18 ` Stefano Babic
2012-02-02 14:56 ` Eric Nelson
2012-02-02 16:32 ` Mike Frysinger
2012-02-03 9:27 ` Stefano Babic
2012-02-09 6:40 ` Dirk Behme
2012-01-31 17:52 ` [U-Boot] [PATCH V6 - Part 3 - 1/2] sf command: allow default bus and chip selects Eric Nelson
2012-02-01 11:26 ` Jason Hui
2012-01-31 17:52 ` [U-Boot] [PATCH V6 - Part 2 - 2/2] README: Add description of SPI Flash (SF) command configuration Eric Nelson
2012-02-01 11:27 ` Jason Hui
2012-01-31 17:52 ` [U-Boot] [PATCH V6 - Part 4 - 1/1] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select Eric Nelson
2012-02-01 11:28 ` Jason Hui
2012-02-08 11:23 ` Stefano Babic
2012-01-31 17:52 ` [U-Boot] [PATCH V6 - Part 5 - 1/1] mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash Eric Nelson
2012-02-01 11:29 ` Jason Hui
2012-02-08 11:23 ` Stefano Babic
2012-02-08 11:23 ` [U-Boot] [PATCH V6 - Part 1 - 1/1] mx6q: define GPIO macros for translating between ordinals and port:index Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201202011200.40182.vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox