* [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
@ 2012-02-06 12:54 Prabhakar Lad
2012-02-06 13:00 ` Dirk Behme
2012-02-06 13:39 ` Thierry Reding
0 siblings, 2 replies; 8+ messages in thread
From: Prabhakar Lad @ 2012-02-06 12:54 UTC (permalink / raw)
To: u-boot
Fix build error for mx6qarm2 board due to prototype change
for function board_mmc_getcd().
mx6qarm2.c:123: error: conflicting types for 'board_mmc_getcd'
u-boot/include/mmc.h:318: note: previous declaration of 'board_mmc_getcd' was here
Signed-off-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
---
board/freescale/mx6qarm2/mx6qarm2.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c
index 9894245..2cb37dd 100644
--- a/board/freescale/mx6qarm2/mx6qarm2.c
+++ b/board/freescale/mx6qarm2/mx6qarm2.c
@@ -120,17 +120,17 @@ struct fsl_esdhc_cfg usdhc_cfg[2] = {
{USDHC4_BASE_ADDR, 1},
};
-int board_mmc_getcd(u8 *cd, struct mmc *mmc)
+int board_mmc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
gpio_direction_input(171); /*GPIO6_11*/
- *cd = gpio_get_value(171);
- } else /* Don't have the CD GPIO pin on board */
- *cd = 0;
+ ret = !gpio_get_value(171);
+ }
- return 0;
+ return ret;
}
int board_mmc_init(bd_t *bis)
--
1.7.4.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
2012-02-06 12:54 [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd() Prabhakar Lad
@ 2012-02-06 13:00 ` Dirk Behme
2012-02-06 13:07 ` Prabhakar Lad
2012-02-06 13:39 ` Thierry Reding
1 sibling, 1 reply; 8+ messages in thread
From: Dirk Behme @ 2012-02-06 13:00 UTC (permalink / raw)
To: u-boot
On 06.02.2012 13:54, Prabhakar Lad wrote:
> Fix build error for mx6qarm2 board due to prototype change
> for function board_mmc_getcd().
> mx6qarm2.c:123: error: conflicting types for 'board_mmc_getcd'
> u-boot/include/mmc.h:318: note: previous declaration of 'board_mmc_getcd' was here
>
> Signed-off-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
> ---
> board/freescale/mx6qarm2/mx6qarm2.c | 10 +++++-----
> 1 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c
> index 9894245..2cb37dd 100644
> --- a/board/freescale/mx6qarm2/mx6qarm2.c
> +++ b/board/freescale/mx6qarm2/mx6qarm2.c
> @@ -120,17 +120,17 @@ struct fsl_esdhc_cfg usdhc_cfg[2] = {
> {USDHC4_BASE_ADDR, 1},
> };
>
> -int board_mmc_getcd(u8 *cd, struct mmc *mmc)
> +int board_mmc_getcd(struct mmc *mmc)
> {
> struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
> + int ret = 0;
>
> if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
> gpio_direction_input(171); /*GPIO6_11*/
> - *cd = gpio_get_value(171);
> - } else /* Don't have the CD GPIO pin on board */
> - *cd = 0;
> + ret = !gpio_get_value(171);
> + }
>
> - return 0;
> + return ret;
> }
>
> int board_mmc_init(bd_t *bis)
This should be fixed already at u-boot-imx.git:
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commitdiff;h=e669db1c209eed02ca8c837914c161f5daa2d8fd
Please check.
Best regards
Dirk
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
2012-02-06 13:00 ` Dirk Behme
@ 2012-02-06 13:07 ` Prabhakar Lad
0 siblings, 0 replies; 8+ messages in thread
From: Prabhakar Lad @ 2012-02-06 13:07 UTC (permalink / raw)
To: u-boot
Dirk,
My bad didn't notice it.
WBR,
--Prabhakar Lad
On Mon, Feb 6, 2012 at 6:30 PM, Dirk Behme <dirk.behme@de.bosch.com> wrote:
> On 06.02.2012 13:54, Prabhakar Lad wrote:
>
>> Fix build error for mx6qarm2 board due to prototype change
>> for function board_mmc_getcd().
>> mx6qarm2.c:123: error: conflicting types for 'board_mmc_getcd'
>> u-boot/include/mmc.h:318: note: previous declaration of 'board_mmc_getcd'
>> was here
>>
>> Signed-off-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
>> ---
>> board/freescale/mx6qarm2/**mx6qarm2.c | 10 +++++-----
>> 1 files changed, 5 insertions(+), 5 deletions(-)
>>
>> diff --git a/board/freescale/mx6qarm2/**mx6qarm2.c
>> b/board/freescale/mx6qarm2/**mx6qarm2.c
>> index 9894245..2cb37dd 100644
>> --- a/board/freescale/mx6qarm2/**mx6qarm2.c
>> +++ b/board/freescale/mx6qarm2/**mx6qarm2.c
>> @@ -120,17 +120,17 @@ struct fsl_esdhc_cfg usdhc_cfg[2] = {
>> {USDHC4_BASE_ADDR, 1},
>> };
>> -int board_mmc_getcd(u8 *cd, struct mmc *mmc)
>> +int board_mmc_getcd(struct mmc *mmc)
>> {
>> struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
>> + int ret = 0;
>> if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
>> gpio_direction_input(171); /*GPIO6_11*/
>> - *cd = gpio_get_value(171);
>> - } else /* Don't have the CD GPIO pin on board */
>> - *cd = 0;
>> + ret = !gpio_get_value(171);
>> + }
>> - return 0;
>> + return ret;
>> }
>> int board_mmc_init(bd_t *bis)
>>
>
> This should be fixed already at u-boot-imx.git:
>
> http://git.denx.de/?p=u-boot/**u-boot-imx.git;a=commitdiff;h=**
> e669db1c209eed02ca8c837914c161**f5daa2d8fd<http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commitdiff;h=e669db1c209eed02ca8c837914c161f5daa2d8fd>
>
> Please check.
>
> Best regards
>
> Dirk
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
2012-02-06 12:54 [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd() Prabhakar Lad
2012-02-06 13:00 ` Dirk Behme
@ 2012-02-06 13:39 ` Thierry Reding
2012-02-06 14:03 ` Prabhakar Lad
1 sibling, 1 reply; 8+ messages in thread
From: Thierry Reding @ 2012-02-06 13:39 UTC (permalink / raw)
To: u-boot
* Prabhakar Lad wrote:
> Fix build error for mx6qarm2 board due to prototype change
> for function board_mmc_getcd().
> mx6qarm2.c:123: error: conflicting types for 'board_mmc_getcd'
> u-boot/include/mmc.h:318: note: previous declaration of 'board_mmc_getcd' was here
>
> Signed-off-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
> ---
> board/freescale/mx6qarm2/mx6qarm2.c | 10 +++++-----
> 1 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c
> index 9894245..2cb37dd 100644
> --- a/board/freescale/mx6qarm2/mx6qarm2.c
> +++ b/board/freescale/mx6qarm2/mx6qarm2.c
> @@ -120,17 +120,17 @@ struct fsl_esdhc_cfg usdhc_cfg[2] = {
> {USDHC4_BASE_ADDR, 1},
> };
>
> -int board_mmc_getcd(u8 *cd, struct mmc *mmc)
> +int board_mmc_getcd(struct mmc *mmc)
> {
> struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
> + int ret = 0;
>
> if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
> gpio_direction_input(171); /*GPIO6_11*/
^^^^^^^^^^^^
Could you fix up this comment at the same time (put spaces after /* and
before */)?
> - *cd = gpio_get_value(171);
> - } else /* Don't have the CD GPIO pin on board */
> - *cd = 0;
> + ret = !gpio_get_value(171);
> + }
>
> - return 0;
> + return ret;
> }
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120206/805f68f7/attachment.pgp>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
2012-02-06 13:39 ` Thierry Reding
@ 2012-02-06 14:03 ` Prabhakar Lad
2012-02-06 14:14 ` Thierry Reding
0 siblings, 1 reply; 8+ messages in thread
From: Prabhakar Lad @ 2012-02-06 14:03 UTC (permalink / raw)
To: u-boot
Thierry,
On 2/6/12, Thierry Reding <thierry.reding@avionic-design.de> wrote:
> * Prabhakar Lad wrote:
>> Fix build error for mx6qarm2 board due to prototype change
>> for function board_mmc_getcd().
>> mx6qarm2.c:123: error: conflicting types for 'board_mmc_getcd'
>> u-boot/include/mmc.h:318: note: previous declaration of 'board_mmc_getcd'
>> was here
>>
>> Signed-off-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
>> ---
>> board/freescale/mx6qarm2/mx6qarm2.c | 10 +++++-----
>> 1 files changed, 5 insertions(+), 5 deletions(-)
>>
>> diff --git a/board/freescale/mx6qarm2/mx6qarm2.c
>> b/board/freescale/mx6qarm2/mx6qarm2.c
>> index 9894245..2cb37dd 100644
>> --- a/board/freescale/mx6qarm2/mx6qarm2.c
>> +++ b/board/freescale/mx6qarm2/mx6qarm2.c
>> @@ -120,17 +120,17 @@ struct fsl_esdhc_cfg usdhc_cfg[2] = {
>> {USDHC4_BASE_ADDR, 1},
>> };
>>
>> -int board_mmc_getcd(u8 *cd, struct mmc *mmc)
>> +int board_mmc_getcd(struct mmc *mmc)
>> {
>> struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
>> + int ret = 0;
>>
>> if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
>> gpio_direction_input(171); /*GPIO6_11*/
> ^^^^^^^^^^^^
> Could you fix up this comment at the same time (put spaces after /* and
> before */)?
>
The patch for this fix already submitted, shall submit independent
patch with this fix?
WBR,
--Prabhakar Lad
>> - *cd = gpio_get_value(171);
>> - } else /* Don't have the CD GPIO pin on board */
>> - *cd = 0;
>> + ret = !gpio_get_value(171);
>> + }
>>
>> - return 0;
>> + return ret;
>> }
>
> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
2012-02-06 14:03 ` Prabhakar Lad
@ 2012-02-06 14:14 ` Thierry Reding
2012-02-07 5:00 ` Prabhakar Lad
0 siblings, 1 reply; 8+ messages in thread
From: Thierry Reding @ 2012-02-06 14:14 UTC (permalink / raw)
To: u-boot
* Prabhakar Lad wrote:
> Thierry,
>
> On 2/6/12, Thierry Reding <thierry.reding@avionic-design.de> wrote:
> > * Prabhakar Lad wrote:
> >> Fix build error for mx6qarm2 board due to prototype change
> >> for function board_mmc_getcd().
> >> mx6qarm2.c:123: error: conflicting types for 'board_mmc_getcd'
> >> u-boot/include/mmc.h:318: note: previous declaration of 'board_mmc_getcd'
> >> was here
> >>
> >> Signed-off-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
> >> ---
> >> board/freescale/mx6qarm2/mx6qarm2.c | 10 +++++-----
> >> 1 files changed, 5 insertions(+), 5 deletions(-)
> >>
> >> diff --git a/board/freescale/mx6qarm2/mx6qarm2.c
> >> b/board/freescale/mx6qarm2/mx6qarm2.c
> >> index 9894245..2cb37dd 100644
> >> --- a/board/freescale/mx6qarm2/mx6qarm2.c
> >> +++ b/board/freescale/mx6qarm2/mx6qarm2.c
> >> @@ -120,17 +120,17 @@ struct fsl_esdhc_cfg usdhc_cfg[2] = {
> >> {USDHC4_BASE_ADDR, 1},
> >> };
> >>
> >> -int board_mmc_getcd(u8 *cd, struct mmc *mmc)
> >> +int board_mmc_getcd(struct mmc *mmc)
> >> {
> >> struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
> >> + int ret = 0;
> >>
> >> if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
> >> gpio_direction_input(171); /*GPIO6_11*/
> > ^^^^^^^^^^^^
> > Could you fix up this comment at the same time (put spaces after /* and
> > before */)?
> >
> The patch for this fix already submitted, shall submit independent
> patch with this fix?
If it hasn't been applied to any of the upstream repositories yet, then you
can always send an updated version.
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120206/c8f33369/attachment.pgp>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
2012-02-06 14:14 ` Thierry Reding
@ 2012-02-07 5:00 ` Prabhakar Lad
2012-02-07 7:22 ` Thierry Reding
0 siblings, 1 reply; 8+ messages in thread
From: Prabhakar Lad @ 2012-02-07 5:00 UTC (permalink / raw)
To: u-boot
Thierry,
On Mon, Feb 6, 2012 at 7:44 PM, Thierry Reding <
thierry.reding@avionic-design.de> wrote:
> * Prabhakar Lad wrote:
> > Thierry,
> >
> > On 2/6/12, Thierry Reding <thierry.reding@avionic-design.de> wrote:
> > > * Prabhakar Lad wrote:
> > >> Fix build error for mx6qarm2 board due to prototype change
> > >> for function board_mmc_getcd().
> > >> mx6qarm2.c:123: error: conflicting types for 'board_mmc_getcd'
> > >> u-boot/include/mmc.h:318: note: previous declaration of
> 'board_mmc_getcd'
> > >> was here
> > >>
> > >> Signed-off-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
> > >> ---
> > >> board/freescale/mx6qarm2/mx6qarm2.c | 10 +++++-----
> > >> 1 files changed, 5 insertions(+), 5 deletions(-)
> > >>
> > >> diff --git a/board/freescale/mx6qarm2/mx6qarm2.c
> > >> b/board/freescale/mx6qarm2/mx6qarm2.c
> > >> index 9894245..2cb37dd 100644
> > >> --- a/board/freescale/mx6qarm2/mx6qarm2.c
> > >> +++ b/board/freescale/mx6qarm2/mx6qarm2.c
> > >> @@ -120,17 +120,17 @@ struct fsl_esdhc_cfg usdhc_cfg[2] = {
> > >> {USDHC4_BASE_ADDR, 1},
> > >> };
> > >>
> > >> -int board_mmc_getcd(u8 *cd, struct mmc *mmc)
> > >> +int board_mmc_getcd(struct mmc *mmc)
> > >> {
> > >> struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
> > >> + int ret = 0;
> > >>
> > >> if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
> > >> gpio_direction_input(171); /*GPIO6_11*/
> > > ^^^^^^^^^^^^
> > > Could you fix up this comment at the same time (put spaces after /* and
> > > before */)?
> > >
> > The patch for this fix already submitted, shall submit independent
> > patch with this fix?
>
> If it hasn't been applied to any of the upstream repositories yet, then you
> can always send an updated version.
>
The patch is already accepted by the maintainer,
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commitdiff;h=e669db1c209eed02ca8c837914c161f5daa2d8fd
so ill drop this fix.
WBR,
--Prabhakar Lad
>
> Thierry
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
2012-02-07 5:00 ` Prabhakar Lad
@ 2012-02-07 7:22 ` Thierry Reding
0 siblings, 0 replies; 8+ messages in thread
From: Thierry Reding @ 2012-02-07 7:22 UTC (permalink / raw)
To: u-boot
* Prabhakar Lad wrote:
> The patch is already accepted by the maintainer,
>
> http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commitdiff;h=e669db1c209eed02ca8c837914c161f5daa2d8fd
> so ill drop this fix.
Okay, no problem.
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120207/c4e8af6b/attachment.pgp>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2012-02-07 7:22 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-02-06 12:54 [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd() Prabhakar Lad
2012-02-06 13:00 ` Dirk Behme
2012-02-06 13:07 ` Prabhakar Lad
2012-02-06 13:39 ` Thierry Reding
2012-02-06 14:03 ` Prabhakar Lad
2012-02-06 14:14 ` Thierry Reding
2012-02-07 5:00 ` Prabhakar Lad
2012-02-07 7:22 ` Thierry Reding
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox