public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
* [U-Boot] [PATCH 3/4 v3] i.MX28: Fix ref_cpu clock setup
@ 2012-02-06 14:59 robert at delien.nl
  2012-02-06 15:35 ` Marek Vasut
  0 siblings, 1 reply; 2+ messages in thread
From: robert at delien.nl @ 2012-02-06 14:59 UTC (permalink / raw)
  To: u-boot

From: Robert Delien <robert@delien.nl>

Fixing erroneous 32-bit access to hw_clkctrl_frac0 and
hw_clkctrl_frac1 registers.

---
 arch/arm/cpu/arm926ejs/mx28/clock.c           |   70 ++++++++++---------------
 arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c    |   23 ++++-----
 arch/arm/include/asm/arch-mx28/regs-clkctrl.h |   47 ++++++-----------
 3 files changed, 54 insertions(+), 86 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/mx28/clock.c b/arch/arm/cpu/arm926ejs/mx28/clock.c
index 9d3a018..c0eea9e 100644
--- a/arch/arm/cpu/arm926ejs/mx28/clock.c
+++ b/arch/arm/cpu/arm926ejs/mx28/clock.c
@@ -46,8 +46,8 @@ static uint32_t mx28_get_pclk(void)
 	struct mx28_clkctrl_regs *clkctrl_regs =
 		(struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
 
-	uint32_t clkctrl, clkseq, clkfrac;
-	uint32_t frac, div;
+	uint32_t clkctrl, clkseq, div;
+	uint8_t clkfrac, frac;
 
 	clkctrl = readl(&clkctrl_regs->hw_clkctrl_cpu);
 
@@ -67,8 +67,8 @@ static uint32_t mx28_get_pclk(void)
 	}
 
 	/* REF Path */
-	clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac0);
-	frac = clkfrac & CLKCTRL_FRAC0_CPUFRAC_MASK;
+	clkfrac = readb(&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_CPU]);
+	frac = clkfrac & CLKCTRL_FRAC0_FRAC_MASK;
 	div = clkctrl & CLKCTRL_CPU_DIV_CPU_MASK;
 	return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
 }
@@ -96,8 +96,8 @@ static uint32_t mx28_get_emiclk(void)
 	struct mx28_clkctrl_regs *clkctrl_regs =
 		(struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
 
-	uint32_t frac, div;
-	uint32_t clkctrl, clkseq, clkfrac;
+	uint32_t clkctrl, clkseq, div;
+	uint8_t clkfrac, frac;
 
 	clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
 	clkctrl = readl(&clkctrl_regs->hw_clkctrl_emi);
@@ -109,11 +109,9 @@ static uint32_t mx28_get_emiclk(void)
 		return XTAL_FREQ_MHZ / div;
 	}
 
-	clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac0);
-
 	/* REF Path */
-	frac = (clkfrac & CLKCTRL_FRAC0_EMIFRAC_MASK) >>
-		CLKCTRL_FRAC0_EMIFRAC_OFFSET;
+	clkfrac = readb(&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_EMI]);
+	frac = clkfrac & CLKCTRL_FRAC0_FRAC_MASK;
 	div = clkctrl & CLKCTRL_EMI_DIV_EMI_MASK;
 	return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
 }
@@ -123,8 +121,8 @@ static uint32_t mx28_get_gpmiclk(void)
 	struct mx28_clkctrl_regs *clkctrl_regs =
 		(struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
 
-	uint32_t frac, div;
-	uint32_t clkctrl, clkseq, clkfrac;
+	uint32_t clkctrl, clkseq, div;
+	uint8_t clkfrac, frac;
 
 	clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
 	clkctrl = readl(&clkctrl_regs->hw_clkctrl_gpmi);
@@ -135,11 +133,9 @@ static uint32_t mx28_get_gpmiclk(void)
 		return XTAL_FREQ_MHZ / div;
 	}
 
-	clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac1);
-
 	/* REF Path */
-	frac = (clkfrac & CLKCTRL_FRAC1_GPMIFRAC_MASK) >>
-		CLKCTRL_FRAC1_GPMIFRAC_OFFSET;
+	clkfrac = readb(&clkctrl_regs->hw_clkctrl_frac1[CLKCTRL_FRAC1_GPMI]);
+	frac = clkfrac & CLKCTRL_FRAC1_FRAC_MASK;
 	div = clkctrl & CLKCTRL_GPMI_DIV_MASK;
 	return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
 }
@@ -152,11 +148,12 @@ void mx28_set_ioclk(enum mxs_ioclock io, uint32_t freq)
 	struct mx28_clkctrl_regs *clkctrl_regs =
 		(struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
 	uint32_t div;
+	int io_reg;
 
 	if (freq == 0)
 		return;
 
-	if (io > MXC_IOCLK1)
+	if ((io < MXC_IOCLK0) || (io > MXC_IOCLK1))
 		return;
 
 	div = (PLL_FREQ_KHZ * PLL_FREQ_COEF) / freq;
@@ -167,23 +164,13 @@ void mx28_set_ioclk(enum mxs_ioclock io, uint32_t freq)
 	if (div > 35)
 		div = 35;
 
-	if (io == MXC_IOCLK0) {
-		writel(CLKCTRL_FRAC0_CLKGATEIO0,
-			&clkctrl_regs->hw_clkctrl_frac0_set);
-		clrsetbits_le32(&clkctrl_regs->hw_clkctrl_frac0,
-				CLKCTRL_FRAC0_IO0FRAC_MASK,
-				div << CLKCTRL_FRAC0_IO0FRAC_OFFSET);
-		writel(CLKCTRL_FRAC0_CLKGATEIO0,
-			&clkctrl_regs->hw_clkctrl_frac0_clr);
-	} else {
-		writel(CLKCTRL_FRAC0_CLKGATEIO1,
-			&clkctrl_regs->hw_clkctrl_frac0_set);
-		clrsetbits_le32(&clkctrl_regs->hw_clkctrl_frac0,
-				CLKCTRL_FRAC0_IO1FRAC_MASK,
-				div << CLKCTRL_FRAC0_IO1FRAC_OFFSET);
-		writel(CLKCTRL_FRAC0_CLKGATEIO1,
-			&clkctrl_regs->hw_clkctrl_frac0_clr);
-	}
+	io_reg = CLKCTRL_FRAC0_IO0 - (io - MXC_IOCLK0);
+	writeb(CLKCTRL_FRAC0_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_frac0_set[io_reg]);
+	writeb(CLKCTRL_FRAC0_CLKGATE | (div & CLKCTRL_FRAC0_FRAC_MASK),
+		&clkctrl_regs->hw_clkctrl_frac0[io_reg]);
+	writeb(CLKCTRL_FRAC0_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_frac0_clr[io_reg]);
 }
 
 /*
@@ -193,19 +180,16 @@ static uint32_t mx28_get_ioclk(enum mxs_ioclock io)
 {
 	struct mx28_clkctrl_regs *clkctrl_regs =
 		(struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
-	uint32_t tmp, ret;
+	uint8_t ret;
+	int io_reg;
 
-	if (io > MXC_IOCLK1)
+	if ((io < MXC_IOCLK0) || (io > MXC_IOCLK1))
 		return 0;
 
-	tmp = readl(&clkctrl_regs->hw_clkctrl_frac0);
+	io_reg = CLKCTRL_FRAC0_IO0 - (io - MXC_IOCLK0);
 
-	if (io == MXC_IOCLK0)
-		ret = (tmp & CLKCTRL_FRAC0_IO0FRAC_MASK) >>
-			CLKCTRL_FRAC0_IO0FRAC_OFFSET;
-	else
-		ret = (tmp & CLKCTRL_FRAC0_IO1FRAC_MASK) >>
-			CLKCTRL_FRAC0_IO1FRAC_OFFSET;
+	ret = readb(&clkctrl_regs->hw_clkctrl_frac0[io_reg]) &
+		CLKCTRL_FRAC0_FRAC_MASK;
 
 	return (PLL_FREQ_KHZ * PLL_FREQ_COEF) / ret;
 }
diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
index 00493b8..9663836 100644
--- a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
+++ b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
@@ -86,22 +86,20 @@ void mx28_mem_init_clock(void)
 		(struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
 
 	/* Gate EMI clock */
-	writel(CLKCTRL_FRAC0_CLKGATEEMI,
-		&clkctrl_regs->hw_clkctrl_frac0_set);
+	writeb(CLKCTRL_FRAC0_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_EMI]);
 
-	/* EMI = 205MHz */
-	writel(CLKCTRL_FRAC0_EMIFRAC_MASK,
-		&clkctrl_regs->hw_clkctrl_frac0_set);
-	writel((0x2a << CLKCTRL_FRAC0_EMIFRAC_OFFSET) &
-		CLKCTRL_FRAC0_EMIFRAC_MASK,
-		&clkctrl_regs->hw_clkctrl_frac0_clr);
+	/* Set fractional divider for ref_emi to 480 * 18 / 21 = 411MHz */
+	writeb(CLKCTRL_FRAC0_CLKGATE | (21 & CLKCTRL_FRAC0_FRAC_MASK),
+		&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_EMI]);
 
 	/* Ungate EMI clock */
-	writel(CLKCTRL_FRAC0_CLKGATEEMI,
-		&clkctrl_regs->hw_clkctrl_frac0_clr);
+	writeb(CLKCTRL_FRAC0_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_frac0_clr[CLKCTRL_FRAC0_EMI]);
 
 	early_delay(11000);
 
+	/* Set EMI clock divider for EMI clock to 411 / 2 = 205MHz */
 	writel((2 << CLKCTRL_EMI_DIV_EMI_OFFSET) |
 		(1 << CLKCTRL_EMI_DIV_XTAL_OFFSET),
 		&clkctrl_regs->hw_clkctrl_emi);
@@ -119,9 +117,8 @@ void mx28_mem_setup_cpu_and_hbus(void)
 		(struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
 
 	/* CPU = 454MHz and ungate CPU clock */
-	clrsetbits_le32(&clkctrl_regs->hw_clkctrl_frac0,
-		CLKCTRL_FRAC0_CPUFRAC_MASK | CLKCTRL_FRAC0_CLKGATECPU,
-		19 << CLKCTRL_FRAC0_CPUFRAC_OFFSET);
+	writeb(19 & CLKCTRL_FRAC0_FRAC_MASK,
+		(uint8_t*)&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_CPU]);
 
 	/* Set CPU bypass */
 	writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
diff --git a/arch/arm/include/asm/arch-mx28/regs-clkctrl.h b/arch/arm/include/asm/arch-mx28/regs-clkctrl.h
index 8e666ee..8576ec0 100644
--- a/arch/arm/include/asm/arch-mx28/regs-clkctrl.h
+++ b/arch/arm/include/asm/arch-mx28/regs-clkctrl.h
@@ -56,8 +56,8 @@ struct mx28_clkctrl_regs {
 
 	uint32_t	reserved[16];
 
-	mx28_reg_32(hw_clkctrl_frac0)		/* 0x1b0 */
-	mx28_reg_32(hw_clkctrl_frac1)		/* 0x1c0 */
+	mx28_reg_8(hw_clkctrl_frac0)		/* 0x1b0 */
+	mx28_reg_8(hw_clkctrl_frac1)		/* 0x1c0 */
 	mx28_reg_32(hw_clkctrl_clkseq)		/* 0x1d0 */
 	mx28_reg_32(hw_clkctrl_reset)		/* 0x1e0 */
 	mx28_reg_32(hw_clkctrl_status)		/* 0x1f0 */
@@ -248,35 +248,22 @@ struct mx28_clkctrl_regs {
 #define	CLKCTRL_FLEXCAN_STOP_CAN1		(1 << 28)
 #define	CLKCTRL_FLEXCAN_CAN1_STATUS		(1 << 27)
 
-#define	CLKCTRL_FRAC0_CLKGATEIO0		(1 << 31)
-#define	CLKCTRL_FRAC0_IO0_STABLE		(1 << 30)
-#define	CLKCTRL_FRAC0_IO0FRAC_MASK		(0x3f << 24)
-#define	CLKCTRL_FRAC0_IO0FRAC_OFFSET		24
-#define	CLKCTRL_FRAC0_CLKGATEIO1		(1 << 23)
-#define	CLKCTRL_FRAC0_IO1_STABLE		(1 << 22)
-#define	CLKCTRL_FRAC0_IO1FRAC_MASK		(0x3f << 16)
-#define	CLKCTRL_FRAC0_IO1FRAC_OFFSET		16
-#define	CLKCTRL_FRAC0_CLKGATEEMI		(1 << 15)
-#define	CLKCTRL_FRAC0_EMI_STABLE		(1 << 14)
-#define	CLKCTRL_FRAC0_EMIFRAC_MASK		(0x3f << 8)
-#define	CLKCTRL_FRAC0_EMIFRAC_OFFSET		8
-#define	CLKCTRL_FRAC0_CLKGATECPU		(1 << 7)
-#define	CLKCTRL_FRAC0_CPU_STABLE		(1 << 6)
-#define	CLKCTRL_FRAC0_CPUFRAC_MASK		0x3f
-#define	CLKCTRL_FRAC0_CPUFRAC_OFFSET		0
-
-#define	CLKCTRL_FRAC1_CLKGATEGPMI		(1 << 23)
-#define	CLKCTRL_FRAC1_GPMI_STABLE		(1 << 22)
-#define	CLKCTRL_FRAC1_GPMIFRAC_MASK		(0x3f << 16)
-#define	CLKCTRL_FRAC1_GPMIFRAC_OFFSET		16
-#define	CLKCTRL_FRAC1_CLKGATEHSADC		(1 << 15)
-#define	CLKCTRL_FRAC1_HSADC_STABLE		(1 << 14)
-#define	CLKCTRL_FRAC1_HSADCFRAC_MASK		(0x3f << 8)
-#define	CLKCTRL_FRAC1_HSADCFRAC_OFFSET		8
-#define	CLKCTRL_FRAC1_CLKGATEPIX		(1 << 7)
-#define	CLKCTRL_FRAC1_PIX_STABLE		(1 << 6)
-#define	CLKCTRL_FRAC1_PIXFRAC_MASK		0x3f
-#define	CLKCTRL_FRAC1_PIXFRAC_OFFSET		0
+#define	CLKCTRL_FRAC0_CLKGATE			(1 << 7)
+#define	CLKCTRL_FRAC0_STABLE			(1 << 6)
+#define	CLKCTRL_FRAC0_FRAC_MASK			0x3f
+#define	CLKCTRL_FRAC0_FRAC_OFFSET		0
+#define	CLKCTRL_FRAC0_CPU			0
+#define	CLKCTRL_FRAC0_EMI			1
+#define	CLKCTRL_FRAC0_IO1			2
+#define	CLKCTRL_FRAC0_IO0			3
+
+#define	CLKCTRL_FRAC1_CLKGATE			(1 << 7)
+#define	CLKCTRL_FRAC1_STABLE			(1 << 6)
+#define	CLKCTRL_FRAC1_FRAC_MASK			0x3f
+#define	CLKCTRL_FRAC1_FRAC_OFFSET		0
+#define	CLKCTRL_FRAC1_PIX			0
+#define	CLKCTRL_FRAC1_HSADC			1
+#define	CLKCTRL_FRAC1_GPMI			2
 
 #define	CLKCTRL_CLKSEQ_BYPASS_CPU		(1 << 18)
 #define	CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF		(1 << 14)
-- 
1.7.0.4

^ permalink raw reply related	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-02-06 15:35 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-02-06 14:59 [U-Boot] [PATCH 3/4 v3] i.MX28: Fix ref_cpu clock setup robert at delien.nl
2012-02-06 15:35 ` Marek Vasut

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox