[U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL

[Marek Vasut <marek.vasut@gmail.com>]

> Hi Marek,
> 
> On Tue, Feb 7, 2012 at 2:53 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
> >> From: Robert Delien <robert@delien.nl>
> >> 
> >> This patch prevents the needless switching on and off of PLL bypass
> >> mode. With this patch in place, single-stepping through the SPL is
> >> now possible.
> > 
> > Why did FSL have it in the bootlets though? Fabio, can you explain?
> 
> Anson (in Cc) explained the following:
> 
> "The switch of CPU clock is to make our EVK board can boot up the
> uboot and kernel with less than 100mA power consumption to meet the
> USB specification, because there is chance that the EVK board is power
> by USB cable only, we need to make sure in this scenario, before USB
> enum done, the total power consumption for our EVK board should be
> less than 100mA, but if CPU running with PLL on, the power consumption
> is > 100mA under uboot, so we need to disable PLL and switch CPU clock
> to XTAL before USB enum done."
> 

And by running off XTAL, the consumption grows so dramatically?

M