[U-Boot] [PATCH 1/3] doc: complete, typos

[U-Boot] [PATCH 1/3] doc: complete, typos

[Peter Meerwald]

From: Peter Meerwald <p.meerwald@bct-electronic.com>

mention repeatable to README.commands and fix some typos

Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>

---
 doc/README.commands |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/doc/README.commands b/doc/README.commands
index d678992..69576dc 100644
--- a/doc/README.commands
+++ b/doc/README.commands
@@ -1,19 +1,19 @@
 
 Commands are added to U-Boot by creating a new command structure.
-This is done by first including command.h
-
-Then using the U_BOOT_CMD() macro to fill in a cmd_tbl_t struct.
+This is done by first including command.h, then using the U_BOOT_CMD() macro 
+to fill in a cmd_tbl_t struct.
 
 U_BOOT_CMD(name,maxargs,repeatable,command,"usage","help")
 
 name:	 is the name of the commad. THIS IS NOT a string.
-maxargs: the maximumn numbers of arguments this function takes
+maxargs: the maximum number of arguments this function takes
+repeatable: either 0 or 1 to indicate if autorepeat is allowed
 command: Function pointer (*cmd)(struct cmd_tbl_s *, int, int, char *[]);
 usage:	 Short description. This is a string
-help:	 long description. This is a string
+help:	 Long description. This is a string
 
 
-**** Behinde the scene ******
+**** Behind the scene ******
 
 The structure created is named with a special prefix (__u_boot_cmd_)
 and placed by the linker in a special section.
-- 
1.7.4.1

[U-Boot] [PATCH 2/3] cmd_eeprom: typo

[Peter Meerwald]

From: Peter Meerwald <p.meerwald@bct-electronic.com>

Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>

---
 common/cmd_eeprom.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index e911377..a48b3d2 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -26,7 +26,7 @@
  * Support for read and write access to EEPROM like memory devices. This
  * includes regular EEPROM as well as  FRAM (ferroelectic nonvolaile RAM).
  * FRAM devices read and write data at bus speed. In particular, there is no
- * write delay. Also, there is no limit imposed on the numer of bytes that can
+ * write delay. Also, there is no limit imposed on the number of bytes that can
  * be transferred with a single read or write.
  *
  * Use the following configuration options to ensure no unneeded performance
-- 
1.7.4.1

[U-Boot] [PATCH 2/3] cmd_eeprom: typo

[Mike Frysinger]

Acked-by: Mike Frysinger <vapier@gentoo.org>
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120208/17bd5f2a/attachment.pgp>

[U-Boot] [PATCH 3/3] usb_ether: fix typo

[Peter Meerwald]

From: Peter Meerwald <p.meerwald@bct-electronic.com>

Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>

---
 drivers/usb/eth/usb_ether.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/usb/eth/usb_ether.c b/drivers/usb/eth/usb_ether.c
index 8bfe256..32f4bc8 100644
--- a/drivers/usb/eth/usb_ether.c
+++ b/drivers/usb/eth/usb_ether.c
@@ -140,7 +140,7 @@ int usb_host_eth_scan(int mode)
 		dev = usb_get_dev_index(i); /* get device */
 		debug("i=%d\n", i);
 		if (dev == NULL)
-			break; /* no more devices avaiable */
+			break; /* no more devices available */
 
 		/* find valid usb_ether driver for this device, if any */
 		probe_valid_drivers(dev);
-- 
1.7.4.1

[U-Boot] [PATCH 3/3] usb_ether: fix typo

[Mike Frysinger]

Acked-by: Mike Frysinger <vapier@gentoo.org>
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120208/dd096e5f/attachment.pgp>

[U-Boot] [PATCH 1/3] doc: complete, typos

[Mike Frysinger]

Acked-by: Mike Frysinger <vapier@gentoo.org>
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120208/f69d4375/attachment.pgp>

[U-Boot] [PATCH 1/3] doc: complete, typos

[Marek Vasut]

> From: Peter Meerwald <p.meerwald@bct-electronic.com>
> 
> mention repeatable to README.commands and fix some typos
> 
> Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
> 
> ---
>  doc/README.commands |   12 ++++++------
>  1 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/doc/README.commands b/doc/README.commands
> index d678992..69576dc 100644
> --- a/doc/README.commands
> +++ b/doc/README.commands
> @@ -1,19 +1,19 @@
> 
>  Commands are added to U-Boot by creating a new command structure.
> -This is done by first including command.h
> -
> -Then using the U_BOOT_CMD() macro to fill in a cmd_tbl_t struct.
> +This is done by first including command.h, then using the U_BOOT_CMD()
> macro +to fill in a cmd_tbl_t struct.
> 
>  U_BOOT_CMD(name,maxargs,repeatable,command,"usage","help")
> 
>  name:	 is the name of the commad. THIS IS NOT a string.
> -maxargs: the maximumn numbers of arguments this function takes
> +maxargs: the maximum number of arguments this function takes
> +repeatable: either 0 or 1 to indicate if autorepeat is allowed
>  command: Function pointer (*cmd)(struct cmd_tbl_s *, int, int, char *[]);
>  usage:	 Short description. This is a string
> -help:	 long description. This is a string
> +help:	 Long description. This is a string
> 
> 
> -**** Behinde the scene ******
> +**** Behind the scene ******
> 
>  The structure created is named with a special prefix (__u_boot_cmd_)
>  and placed by the linker in a special section.

Please add my:

Tested-by: Marek Vasut <marek.vasut@gmail.com>

;-)