[U-Boot] mx6: consolidating and extending anadig/analog/anatop register defs

[Marek Vasut <marek.vasut@gmail.com>]

> Hi, Wolfgang,
> 
> >-----Original Message-----
> >From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
> >On Behalf Of Wolfgang Grandegger
> >Sent: Monday, February 13, 2012 8:08 PM
> >To: U-Boot
> >Subject: [U-Boot] mx6: consolidating and extending anadig/analog/anatop
> >register defs
> >
> >Hello,
> >
> >for the USB support on MX6Q, I'm trying to consolidate and extend the
> >register definitions for the ANADIG registers. Unfortunately, three
> >different names are used for the same registers: ANADIG, analog and
> >ANATOP. Any idea what the names do stand for and what would be the most
> >appropriate one. Apart from that, we should have a separate structure and
> >header file for these registers. Currently, they are added to the CCM
> >regs.
> 
> The register definition in the CCM according to the RM as followings:
> Addresses: CCM_analog_PLL_SYS is 0h base + 0h offset = 0000_0000h
> CCM_analog_PLL_SYS_SET is 0h base + 4h offset = 0000_0004h
> CCM_analog_PLL_SYS_CLR is 0h base + 8h offset = 0000_0008h
> CCM_analog_PLL_SYS_TOG is 0h base + Ch offset = 0000_000Ch
> 
> Thus, I put the register definition into the CCM parts.

This again resembles MX28 ... damn, can't we share some parts of MX28 for MX6Q ?

Fabio, I think I'll need one too, this is getting weird ;-)

M