From: Mike Frysinger <vapier@gentoo.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__))
Date: Thu, 23 Feb 2012 10:03:01 -0500 [thread overview]
Message-ID: <201202231003.03101.vapier@gentoo.org> (raw)
In-Reply-To: <CA+M6bX=cUHP0kJZspyYWtTA-TC5V9wLZ4WjCZEDuv3xakCn1-Q@mail.gmail.com>
On Thursday 23 February 2012 09:21:00 Tom Rini wrote:
> On Thu, Feb 23, 2012 at 7:06 AM, Aneesh V <aneesh@ti.com> wrote:
> > Avoid using __attribute__ ((__packed__)) unless it's
> > absolutely necessary. "packed" will remove alignment
> > requirements for the respective objects and may cause
> > alignment issues unless alignment is also enforced
> > using a pragma.
> >
> > Here, these packed attributes were causing alignment
> > faults in Thumb build.
>
> Why did we pack these to start with? Otherwise seems fine (and I see
> the rest of the TI parts don't have this particular packing).
because these represent hardware register blocks which get used with writew()
and typically those blocks get marked packed.
if the arch won't introduce padding with the members, then this change should
be ok, and looking at the structs which are just 2 16bit members, that should
be the case here.
if you really want to be pedantic, i think the alternative would be:
struct pad_conf_entry {} __packed __aligned(2);
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120223/63ec23cf/attachment.pgp>
next prev parent reply other threads:[~2012-02-23 15:03 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-06 11:37 [U-Boot] [RFC PATCH 0/4] Enable Thumb build for ARM platforms Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 1/4] ARM: enable Thumb build Aneesh V
2012-02-06 18:45 ` Tom Rini
2012-02-07 7:43 ` Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 2/4] OMAP3+: fix issues with " Aneesh V
2012-02-06 21:06 ` Albert ARIBAUD
2012-02-07 7:49 ` Aneesh V
2012-02-09 8:58 ` Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 3/4] OMAP3+: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 4/4] OMAP4: enable Thumb build Aneesh V
2012-02-06 12:26 ` [U-Boot] [RFC PATCH 0/4] Enable Thumb build for ARM platforms Aneesh V
2012-02-06 13:22 ` Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH " Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH 1/4] ARM: enable Thumb build Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions Aneesh V
2012-02-17 11:09 ` Aneesh V
2012-02-18 10:13 ` Albert ARIBAUD
2012-02-18 13:24 ` Aneesh V
2012-02-18 15:04 ` Albert ARIBAUD
2012-02-18 16:34 ` Aneesh V
2012-02-18 16:48 ` Albert ARIBAUD
2012-02-20 16:08 ` Aneesh V
2012-02-23 11:06 ` Aneesh V
2012-02-17 17:13 ` Mike Frysinger
2012-02-18 11:12 ` Aneesh V
2012-02-18 11:34 ` Albert ARIBAUD
2012-02-18 22:03 ` Simon Glass
2012-02-19 7:15 ` Mike Frysinger
2012-02-20 20:07 ` Tom Rini
2012-02-20 21:53 ` Simon Glass
2012-02-21 4:19 ` Mike Frysinger
2012-02-21 4:44 ` Simon Glass
2012-02-21 14:33 ` Tom Rini
2012-02-21 15:42 ` Mike Frysinger
2012-02-21 18:03 ` Aneesh V
2012-02-21 19:28 ` Mike Frysinger
2012-02-21 20:01 ` Aneesh V
2012-02-21 4:18 ` Mike Frysinger
2012-02-15 13:57 ` [U-Boot] [PATCH 3/4] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH 4/4] OMAP4: enable Thumb build Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 1/5] arm: adapt asm/linkage.h from Linux Aneesh V
2012-02-23 14:01 ` Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 2/5] armv7: add appropriate headers for assembly functions Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build Aneesh V
2012-02-23 14:57 ` Mike Frysinger
2012-02-23 17:28 ` Aneesh V
2012-02-23 17:34 ` Tom Rini
2012-02-23 17:49 ` Aneesh V
2012-02-23 17:51 ` Tom Rini
2012-02-23 18:09 ` Aneesh V
2012-02-23 18:13 ` Aneesh V
2012-02-23 18:05 ` Mike Frysinger
2012-02-23 18:04 ` Mike Frysinger
2012-02-23 18:12 ` Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 4/5] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 5/5] OMAP4: enable Thumb build Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux Aneesh V
2012-02-23 14:59 ` Mike Frysinger
2012-02-23 15:24 ` Tom Rini
2012-02-23 16:57 ` Mike Frysinger
2012-02-23 17:40 ` Aneesh V
2012-02-23 23:52 ` Mike Frysinger
2012-02-24 10:30 ` Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 2/6] armv7: add appropriate headers for assembly functions Aneesh V
2012-02-23 14:59 ` Mike Frysinger
2012-02-23 14:06 ` [U-Boot] [PATCH v3 3/6] ARM: enable Thumb build Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-23 15:05 ` Mike Frysinger
2012-02-23 17:50 ` Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__)) Aneesh V
2012-02-23 14:21 ` Tom Rini
2012-02-23 14:56 ` Aneesh V
2012-02-23 15:03 ` Mike Frysinger
2012-02-23 15:03 ` Mike Frysinger [this message]
2012-02-23 15:42 ` Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 6/6] OMAP4: enable Thumb build Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 1/6] arm: adapt asm/linkage.h from Linux Aneesh V
2012-03-08 17:14 ` Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 2/6] armv7: add appropriate headers for assembly functions Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 3/6] ARM: enable Thumb build Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 5/6] omap4+: Avoid using __attribute__ ((__packed__)) Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 6/6] OMAP4: enable Thumb build Aneesh V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201202231003.03101.vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox