From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pavel Machek Date: Fri, 24 Feb 2012 19:16:46 +0100 Subject: [U-Boot] u-boot for SPEAr1310 In-Reply-To: <201202231549.02184.marek.vasut@gmail.com> References: <20120223141718.GB18792@elf.ucw.cz> <201202231542.25187.sr@denx.de> <201202231549.02184.marek.vasut@gmail.com> Message-ID: <20120224181645.GA8403@elf.ucw.cz> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi! On Thu 2012-02-23 15:49:02, Marek Vasut wrote: > > On Thursday 23 February 2012 15:17:19 Pavel Machek wrote: > > My experience is mostly SPEAr600 only right now. Not sure if there are > > bigger differences between those SoC's in the BootROM. > > I believe the spear600 is totally different from 1300. But, simple: > > reset halt ; load ... ; go ... > > combo should work I believe. In case you're loading some U-Boot SPL, > it's very I have a problem here: "reset halt" does not reset the board; probably some kind of BDI problem. I tried playing with BDI config, but was not successful. I tried to load u-boot from u-boot using: u-boot> tftp 0x00700000 192.168.1.1:/spear1310eval/u-boot.bin Using mii0 device TFTP from server 192.168.1.1; our IP address is 192.168.20.47 Filename '/spear1310eval/u-boot.bin'. Load address: 0x700000 Loading: ############## done Bytes transferred = 193032 (2f208 hex) u-boot> go 0x00700000 ## Starting application at 0x00700000 ... U-Boot 2010.03-lsp-3.0-rc7 (Sep 15 2011 - 13:52:19) SPEAr-emlix-CCLite-BSP-0.11 ...it started something. According to gdb it looks like "new" u-boot executes briefly, but fails in C code while processing intialization, and it seems that "old" u-boot takes over. (Some kind of failure and board resets itself?). Any ideas? Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html