From: Mike Frysinger <vapier@gentoo.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 05/15] common/main.c: Fix function readline
Date: Sun, 26 Feb 2012 23:33:01 -0500 [thread overview]
Message-ID: <201202262333.03150.vapier@gentoo.org> (raw)
In-Reply-To: <7289416.t84EK1VC5H@pali-elitebook>
On Saturday 07 January 2012 03:51:16 Pali Roh?r wrote:
> On Friday 06 January 2012 15:15:29 Mike Frysinger wrote:
> > On Sunday 18 December 2011 16:34:01 Pali Roh?r wrote:
> > > * Ignore ANSI escape codes for moving cursor, which are generated by
> > >
> > > keyboard
> >
> > this probably should be behind an appropriate CONFIG knob. i don't think
> > this is relevant to serial users (which are the majority of boards).
>
> I think this is also relevant to serial console too. I tried serial console
> (over USB) with Nokia N900 on computer (ANSI terminal) and if I pressed
> cursor key (UP/DOWN/LEFT/RIGHT) it moved cursor. But in readline function
> buffer was stored ANSI sequence. So when I pressed ENTER, u-boot tried to
> execute that buffer and showed me error. But it showed error message
> something like unknown command <ansi_seq>. ansi_seq was recognized in ansi
> terminal on computer and it garbaged output. (for example if asn_seq was
> move up, error message continued on previous line...)
>
> This patch ignore ansi codes which can be generated by curosor keys, so
> there will not be that bad error messages...
do you have CONFIG_CMDLINE_EDITING enabled ? arrow keys work just fine when
that's enabled, and if it isn't, then i think it's expected behavior that
pressing the arrow keys would generate "junk" that u-boot wouldn't interpret.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120226/fd20c381/attachment.pgp>
next prev parent reply other threads:[~2012-02-27 4:33 UTC|newest]
Thread overview: 111+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-01 8:42 [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900) Pali Rohár
2011-09-01 8:46 ` Marek Vasut
2011-09-01 9:06 ` Pali Rohár
2011-09-01 9:39 ` Marek Vasut
2011-09-01 9:02 ` Stefano Babic
2011-09-01 9:09 ` Pali Rohár
2011-09-01 9:24 ` Stefano Babic
2011-09-01 10:49 ` Pali Rohár
2011-09-01 11:04 ` Marek Vasut
2011-09-01 11:34 ` [U-Boot] [PATCH 01/15] Make bootm optionally use pre-existing atags for Linux kernel boot Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 02/15] Store existing atags at startup if chainloading Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 03/15] Nokia RX-51 aka N900 support Pali Rohár
2011-09-01 13:57 ` Mike Frysinger
2011-10-09 0:20 ` Pali Rohár
2011-10-09 15:59 ` Mike Frysinger
2011-10-12 15:10 ` Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 04/15] Only delay boot if keyboard open Pali Rohár
2011-09-01 13:58 ` Mike Frysinger
2011-10-08 23:29 ` Pali Rohár
2011-10-09 16:00 ` Mike Frysinger
2011-09-01 11:34 ` [U-Boot] [PATCH 05/15] Change Wireless LAN mode from M4 to M0 Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 06/15] Look for boot.scr on 'mmc 0:3' instead 'mmc 0' and add support for loading boot.scr from 'mmc 2:1' Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 07/15] RX-51: Fixed compilation on top of master (changes from Beagle Board) Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 08/15] RX-51: Add support for resetting twl4030 watchdog Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 09/15] RX-51: Fix keymap Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 10/15] include/common.h: Add some macros for ANSI escape codes Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 11/15] drivers/video/cfb_console.c: Added support " Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 12/15] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-09-01 13:59 ` Mike Frysinger
2011-10-08 23:31 ` Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 13/15] New config variable CONFIG_MENU Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 14/15] New config variable CONFIG_PREMONITOR Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 15/15] RX-51: Add support for bootmenu Pali Rohár
2011-09-01 13:52 ` [U-Boot] [PATCH 01/15] Make bootm optionally use pre-existing atags for Linux kernel boot Mike Frysinger
2011-10-08 23:37 ` Pali Rohár
2011-09-01 11:53 ` [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-10-09 0:24 ` Pali Rohár
2011-09-01 17:11 ` Pali Rohár
2011-12-17 16:59 ` [U-Boot] " Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 01/16] arch/arm/cpu/armv7/omap3/lowlevel_init.S: save_boot_params Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 02/16] arch/arm/lib/bootm.c: Optionally use existing atags Pali Rohár
2011-12-18 18:54 ` Mike Frysinger
2011-12-18 20:12 ` Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 03/16] include/twl4030.h: Add power bus message definitions Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 04/16] include/common.h: Add some ANSI escape codes definitions Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 05/16] common/main.c: Fix function readline Pali Rohár
2011-12-18 18:58 ` Mike Frysinger
2011-12-18 20:12 ` Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 06/16] drivers/video/cfb_console.c: Fix function console_scrollup Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 07/16] drivers/video/cfb_console.c: Add function console_swap_colors Pali Rohár
2011-12-18 18:57 ` Mike Frysinger
2011-12-18 19:00 ` Pali Rohár
2011-12-18 20:06 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 08/16] drivers/video/cfb_console.c: Add function console_clear and console_clear_line Pali Rohár
2011-12-18 19:00 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 09/16] drivers/video/cfb_console.c: Add functions for moving with cursor Pali Rohár
2011-12-18 19:00 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 10/16] drivers/video/cfb_console.c: Add support for some ANSI terminal escape codes Pali Rohár
2011-12-18 19:01 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 11/16] New command clr: Clear the ANSI terminal Pali Rohár
2011-12-18 18:56 ` Mike Frysinger
2011-12-18 19:20 ` Pali Rohár
2011-12-18 20:07 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 12/16] New config variable CONFIG_MENUCMD Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 13/16] New config variable CONFIG_PREMONITOR Pali Rohár
2011-12-18 19:05 ` Mike Frysinger
2011-12-18 19:37 ` Pali Rohár
2011-12-18 20:08 ` Mike Frysinger
2011-12-18 20:14 ` Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 14/16] New board support: Nokia RX-51 aka N900 Pali Rohár
2011-12-18 19:06 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 15/16] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-12-18 19:07 ` Mike Frysinger
2011-12-18 19:12 ` Pali Rohár
2011-12-18 20:07 ` Mike Frysinger
2011-12-18 20:16 ` Pali Rohár
2012-01-06 6:59 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 16/16] RX-51: Add support for bootmenu Pali Rohár
2011-12-17 19:25 ` [U-Boot] U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-12-18 10:13 ` Pali Rohár
2011-12-18 12:42 ` Wolfgang Denk
2011-12-18 19:01 ` Mike Frysinger
2011-12-18 20:10 ` Pali Rohár
2011-12-18 21:33 ` [U-Boot] [PATCH v3] " Pali Rohár
2011-12-18 21:33 ` [U-Boot] [PATCH 01/15] arch/arm/cpu/armv7/omap3/lowlevel_init.S: save_boot_params Pali Rohár
2011-12-18 21:33 ` [U-Boot] [PATCH 02/15] arch/arm/lib/bootm.c: Optionally use existing atags Pali Rohár
2011-12-18 21:33 ` [U-Boot] [PATCH 03/15] include/twl4030.h: Add power bus message definitions Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 04/15] include/common.h: Add some ANSI escape codes definitions Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 05/15] common/main.c: Fix function readline Pali Rohár
2012-01-06 20:15 ` Mike Frysinger
2012-01-07 8:51 ` Pali Rohár
2012-02-27 4:33 ` Mike Frysinger [this message]
2012-02-27 18:40 ` Pali Rohár
2012-02-27 20:20 ` Mike Frysinger
2011-12-18 21:34 ` [U-Boot] [PATCH 06/15] drivers/video/cfb_console.c: Fix function console_scrollup Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 07/15] drivers/video/cfb_console.c: Add function console_clear and console_clear_line Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 08/15] drivers/video/cfb_console.c: Add functions for moving with cursor Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 09/15] drivers/video/cfb_console.c: Add support for some ANSI terminal escape codes Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 10/15] New command clear: Clear the ANSI terminal Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 11/15] New config variable CONFIG_MENUCMD Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 12/15] New config variable CONFIG_PREMONITOR Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 13/15] New board support: Nokia RX-51 aka N900 Pali Rohár
2012-01-03 16:05 ` Tom Rini
2012-01-10 13:14 ` Pali Rohár
2012-01-10 14:53 ` Tom Rini
2011-12-18 21:34 ` [U-Boot] [PATCH 14/15] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 15/15] RX-51: Add support for bootmenu Pali Rohár
2012-01-03 16:06 ` Tom Rini
2011-12-18 23:57 ` [U-Boot] [PATCH v3] U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-12-19 7:17 ` Pali Rohár
2011-12-19 8:43 ` Graeme Russ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201202262333.03150.vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox